OSCAM - Rod Bending Machine Range

OSCAM - Rod Bending Machine K2 type

OSCAM - Rod Bending Machine G-FAST type

OSCAM - Rod Bending Machine K60 type

OSCAM - Rod Bending Machine K2 type

OSCAM - Rod Bending Machine L2 type

Model G-FAST

- Automatic rod bending machine to bend all types of iron, up to a diameter of 22 mm.

- Particularly suited for stirrup bending operations and for cement layers.

- It is supplied with a remote control pedal  and, upon request, can be supplied with a split pin for right-angle bends.

- Bending time: 1,6 seconds for a 180° bend

L2 type

- The bending machine suitable for both large building sites and pre-shaping plants.

- Fitted with an epicycloidal reduction unit with very high performance levels that minimises consumption, the bending machine ensures a long service life with virtually no maintenance.

- The bending machines bend all types of iron up to 36 mm in diameter, with two rotation directions.

- With EASY ANGLE electronic programmer as standard
With two speeds:
- Slow: up to 3,7 seconds for bends up to 180°
- Fast: 2,5 seconds for bends of up to 180°.

The complete range of pins, bushes and rollers supplied allows to carry out of all the desired bends and angles and any kind of shape. The machine is supplied with 2 remote control pedals.

K2 type

- Bending machine suitable for both large building sites and pre-shaping plants
- Fitted with an epicycloidal reduction unit with very high performance levels that minimises steel consumption and ensures a long service life with virtually no maintenance.
- To bend all types of iron up to a diameter of 50 mm
- Two direction rotations to execute bends on the right and left-hand side without overturning the rods. With EASY ANGLE electronic programmer as standard
The bending machine has two speeds:
- Slow: 4 seconds to carry out 180° angles
- Fast: 3 seconds for bends up to 180°

The complete range of pins, bushes and rollers supplied allows to execute all the desired bends and angles and any kind of shape. The machine is supplied with a remote control pedal.

K60 type

- Model for bending all types of iron with a diameter greater than 50 mm.
- Suitable for processing iron for large projects (dams, airports, power plants, etc.)
- With a single rotation direction and  EASY ANGLE electronic programmer as standard.

With two bending speeds: SLOW for rods with a large diameter or a long bending side, FAST: for rods with a small diameter and a short bending side.

- Slow: 5 seconds to execute 180° angles
- Fast: 4 seconds for bends up to 180°
- The complete range of pins, bushes and rollers supplied with the machine allows to execute all the desired bends and angles and any kind of shape. The machine is equipped with an epicycloidal reduction unit with very high performance levels that minimises consumption ensuring a long service life with virtually no maintenance.

Read more...

To contact Delahenty Machinery about OSCAM Rod Bending Machine Range use Get a quote.

Model G-FAST

- Automatic rod bending machine to bend all types of iron, up to a diameter of 22 mm.

- Particularly suited for stirrup bending operations and for cement layers.

- It is supplied with a remote control pedal  and, upon request, can be supplied with a split pin for right-angle bends.

- Bending time: 1,6 seconds for a 180° bend

L2 type

- The bending machine suitable for both large building sites and pre-shaping plants.

- Fitted with an epicycloidal reduction unit with very high performance levels that minimises consumption, the bending machine ensures a long service life with virtually no maintenance.

- The bending machines bend all types of iron up to 36 mm in diameter, with two rotation directions.

- With EASY ANGLE electronic programmer as standard
With two speeds:
- Slow: up to 3,7 seconds for bends up to 180°
- Fast: 2,5 seconds for bends of up to 180°.

The complete range of pins, bushes and rollers supplied allows to carry out of all the desired bends and angles and any kind of shape. The machine is supplied with 2 remote control pedals.

K2 type

- Bending machine suitable for both large building sites and pre-shaping plants
- Fitted with an epicycloidal reduction unit with very high performance levels that minimises steel consumption and ensures a long service life with virtually no maintenance.
- To bend all types of iron up to a diameter of 50 mm
- Two direction rotations to execute bends on the right and left-hand side without overturning the rods. With EASY ANGLE electronic programmer as standard
The bending machine has two speeds:
- Slow: 4 seconds to carry out 180° angles
- Fast: 3 seconds for bends up to 180°

The complete range of pins, bushes and rollers supplied allows to execute all the desired bends and angles and any kind of shape. The machine is supplied with a remote control pedal.

K60 type

- Model for bending all types of iron with a diameter greater than 50 mm.
- Suitable for processing iron for large projects (dams, airports, power plants, etc.)
- With a single rotation direction and  EASY ANGLE electronic programmer as standard.

With two bending speeds: SLOW for rods with a large diameter or a long bending side, FAST: for rods with a small diameter and a short bending side.

- Slow: 5 seconds to execute 180° angles
- Fast: 4 seconds for bends up to 180°
- The complete range of pins, bushes and rollers supplied with the machine allows to execute all the desired bends and angles and any kind of shape. The machine is equipped with an epicycloidal reduction unit with very high performance levels that minimises consumption ensuring a long service life with virtually no maintenance.

Read less...

To contact Delahenty Machinery about OSCAM Rod Bending Machine Range use Get a quote.

OSCAM - model - G Fast(0.11MB)

OSCAM_CAT004_machines for site(3.73MB)