Omniterm - Signal Isolator with DIN Rail Mount - Model C2063

Signal Isolator with DIN Rail Mount - Model C2063

The OMNITERM LPI is a loop powered isolating current repeater specifically designed to isolate instrument current loops from circulating ground currents that can cause system inaccuracies, or at worst, instrument failure.

Insert in any 4-20mA current loop to isolate the instruments in the loop. The current applied to the input is repeated on the isolated output, and the load present on the output is reflected back to the input. No separate power source is required.

Forming part of OMNIFLEX’s extensive OMNITERM range of industrial instrumentation, the OMNITERM LPI is designed to be DIN rail mounted, and is 22.5mm wide.

For high density applications consider the dual version Omniterm LPD (model C2462A)

• Isolate any instrument current loop to 1500Vac
• Powered by the current loop
• Load independent – no field calibration required
• High load capability (1 kohm)
• Reverse polarity and overload protected
• Ultra-Low volt drop <3 Volts at 20 mA

For further information about Signal Isolator with DIN Rail Mount - Model C2063 visit Omniflex at http://www.omniflex.com/
OR
Use the IndustrySearch e-mail feature below and one of the Omniflex team will respond to your enquiry directly.

Reliable Products & Solutions In Industrial Instrumentation

Read more...

To contact Omniflex about Omniterm Signal Isolator with DIN Rail Mount - Model C2063 use Get a quote.

The OMNITERM LPI is a loop powered isolating current repeater specifically designed to isolate instrument current loops from circulating ground currents that can cause system inaccuracies, or at worst, instrument failure.

Insert in any 4-20mA current loop to isolate the instruments in the loop. The current applied to the input is repeated on the isolated output, and the load present on the output is reflected back to the input. No separate power source is required.

Forming part of OMNIFLEX’s extensive OMNITERM range of industrial instrumentation, the OMNITERM LPI is designed to be DIN rail mounted, and is 22.5mm wide.

For high density applications consider the dual version Omniterm LPD (model C2462A)

• Isolate any instrument current loop to 1500Vac
• Powered by the current loop
• Load independent – no field calibration required
• High load capability (1 kohm)
• Reverse polarity and overload protected
• Ultra-Low volt drop <3 Volts at 20 mA

For further information about Signal Isolator with DIN Rail Mount - Model C2063 visit Omniflex at http://www.omniflex.com/
OR
Use the IndustrySearch e-mail feature below and one of the Omniflex team will respond to your enquiry directly.

Reliable Products & Solutions In Industrial Instrumentation

Read less...

To contact Omniflex about Omniterm Signal Isolator with DIN Rail Mount - Model C2063 use Get a quote.