Quality in Control P/L OEM Controller | ...
In operation, the MR340-0 Controller sends two optical wavelength signals to a remote MR34X series Sensor. The encoder then modulates each optical beam based on the direction with a leading or lagging phase shift.
The return optical signals are split into two separate beams and converted back into electrical signals by two photodiodes whose outputs are amplified by two gain-controlled amplifiers.
A microprocessor supervises the amplitude of the optical signals and constantly adjusts the signal to provide a stable quadrature output.
The system has built-in diagnostics and can signal any anomaly occurring during sensor operation.
Product features:
| Electrical Interface | |
| Connector | 16-pin ribbon cable receptacle, 3M N2516-5002-RB
Recommended mating plug, 3M 89116-0103 |
| Quadrature Outputs | A+/A-/B+/B- RS422 line driver outputs, 100 kHz maximum bandwidth |
| Discrete Signals | ZERO Input, STATUS out, 5V logic |
| Serial Interface | Modbus RTU or RS422/485 compatible, User settable baudrate: 9,600 to 115,200
Byte format: 1 Start Bit, 8 Data Bits, 1 Stop Bit, No Parity |
| Power Supply | +5 VDC, 55mA typical, 100mA maximum
Recommend 100mA power supply |
To contact Quality in Control P/L about Quality in Control P/L OEM Controller | MR340-1 use Get a quote.
In operation, the MR340-0 Controller sends two optical wavelength signals to a remote MR34X series Sensor. The encoder then modulates each optical beam based on the direction with a leading or lagging phase shift.
The return optical signals are split into two separate beams and converted back into electrical signals by two photodiodes whose outputs are amplified by two gain-controlled amplifiers.
A microprocessor supervises the amplitude of the optical signals and constantly adjusts the signal to provide a stable quadrature output.
The system has built-in diagnostics and can signal any anomaly occurring during sensor operation.
Product features:
| Electrical Interface | |
| Connector | 16-pin ribbon cable receptacle, 3M N2516-5002-RB
Recommended mating plug, 3M 89116-0103 |
| Quadrature Outputs | A+/A-/B+/B- RS422 line driver outputs, 100 kHz maximum bandwidth |
| Discrete Signals | ZERO Input, STATUS out, 5V logic |
| Serial Interface | Modbus RTU or RS422/485 compatible, User settable baudrate: 9,600 to 115,200
Byte format: 1 Start Bit, 8 Data Bits, 1 Stop Bit, No Parity |
| Power Supply | +5 VDC, 55mA typical, 100mA maximum
Recommend 100mA power supply |
To contact Quality in Control P/L about Quality in Control P/L OEM Controller | MR340-1 use Get a quote.
-280x280-state_7.jpg)
-280x280-state_7.jpg)
-280x280-state_7.jpg)
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales
