Odour Control Chemical | Airopure
Airopure™ Odour Control Chemical
The company's sophisticated Airopure™ solution is designed to be heavily diluted in water and sprayed – ideally using Probe Rotary Atomisers – on to odour-producing chemicals in the air. It combines with the chemicals to make them safe and odourless and then pulls them down to the ground.
Normally the only answer is to spray a pleasant fragrance to mask the unpleasant one – Probe takes a more scientific and effective approach. Airopure is a very exciting product, and one which is certain to be widely taken up.
Why it matters
Industrial odours are a major environmental problem. They can create an unpleasant working environment, which is obviously of concern to those who are required to work there. Of great concern also is the affect such odours may have on residents who live near industrial premises.
More importantly, long-term exposure to industrial odours is a kind of passive form of pollution. There is the prospect of long-term damage to health, with the environmental and legal issues which that would raise.
How Airopure™ works
Airopure works by using special surfactant reagents which help the minute water droplets to take up the organic substances which produce smells – something which does not normally happen. This is done by creating "clusters" of molecules inside the droplets which trap the odours which then fall to the ground with the water rather than returning to the air as gas.
Airopure™ itself is completely safe and has been tested for all major hazards.
How Airopure™ helps
Spraying a continuous aerosol of Airopure™ is an effective and low-cost method of odour control, even in difficult situations such as industrial premises and sewerage works. In fact the product is so effective that if it is used properly, the smell is entirely eradicated by the time it reaches the outer limits of the area sprayed.
Application
In order to work, Airopure™ must be applied using an accurate and precise spraying system which produces microscopic droplets of a consistent size. Ultrasonic, air assisted and misting nozzles can be used, but Probe Industries strongly suggests that Airopure™ is used with its Rotary Atomiser system.
To contact ColdMist Cooling Australia about Odour Control Chemical | Airopure use Get a quote.
Airopure™ Odour Control Chemical
The company's sophisticated Airopure™ solution is designed to be heavily diluted in water and sprayed – ideally using Probe Rotary Atomisers – on to odour-producing chemicals in the air. It combines with the chemicals to make them safe and odourless and then pulls them down to the ground.
Normally the only answer is to spray a pleasant fragrance to mask the unpleasant one – Probe takes a more scientific and effective approach. Airopure is a very exciting product, and one which is certain to be widely taken up.
Why it matters
Industrial odours are a major environmental problem. They can create an unpleasant working environment, which is obviously of concern to those who are required to work there. Of great concern also is the affect such odours may have on residents who live near industrial premises.
More importantly, long-term exposure to industrial odours is a kind of passive form of pollution. There is the prospect of long-term damage to health, with the environmental and legal issues which that would raise.
How Airopure™ works
Airopure works by using special surfactant reagents which help the minute water droplets to take up the organic substances which produce smells – something which does not normally happen. This is done by creating "clusters" of molecules inside the droplets which trap the odours which then fall to the ground with the water rather than returning to the air as gas.
Airopure™ itself is completely safe and has been tested for all major hazards.
How Airopure™ helps
Spraying a continuous aerosol of Airopure™ is an effective and low-cost method of odour control, even in difficult situations such as industrial premises and sewerage works. In fact the product is so effective that if it is used properly, the smell is entirely eradicated by the time it reaches the outer limits of the area sprayed.
Application
In order to work, Airopure™ must be applied using an accurate and precise spraying system which produces microscopic droplets of a consistent size. Ultrasonic, air assisted and misting nozzles can be used, but Probe Industries strongly suggests that Airopure™ is used with its Rotary Atomiser system.
To contact ColdMist Cooling Australia about Odour Control Chemical | Airopure use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product