Non Slip Sealer - Ultra Max Coarse
Non Slip Sealer - Ultra Max Coarse
Ultra Max has been developed by Anti-Slip Safety Solutions to create a slip resistant coating that can be applied to stone, masonry and concrete. With the pre-treatment of Max-Grip it can also be used on some surfaces such as ceramic.
Ultra Max incorporates aggregate with a premium clear acrylic sealer in a solvent solution. A low odour, Water Based 2 part polyurethane has also been developed
The slip resistance achieved with Ultra Max varies due to the micron size of the aggregate used.
Ultra Max coarse will achieve a slip rating that is classified as a r12 or greater.
Heavy traffic areas can be re-coated as required without stripping back the original coating.
Surfaces once coated with Ultra Max should be maintained by using a mild detergent with a soft broom, then rinsed.
To contact Anti-Slip Safety Solutions about Non Slip Sealer - Ultra Max Coarse use Get a quote.
Non Slip Sealer - Ultra Max Coarse
Ultra Max has been developed by Anti-Slip Safety Solutions to create a slip resistant coating that can be applied to stone, masonry and concrete. With the pre-treatment of Max-Grip it can also be used on some surfaces such as ceramic.
Ultra Max incorporates aggregate with a premium clear acrylic sealer in a solvent solution. A low odour, Water Based 2 part polyurethane has also been developed
The slip resistance achieved with Ultra Max varies due to the micron size of the aggregate used.
Ultra Max coarse will achieve a slip rating that is classified as a r12 or greater.
Heavy traffic areas can be re-coated as required without stripping back the original coating.
Surfaces once coated with Ultra Max should be maintained by using a mild detergent with a soft broom, then rinsed.
To contact Anti-Slip Safety Solutions about Non Slip Sealer - Ultra Max Coarse use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product