Modular Timber Systems | Ceiling & Wall Panels

Modular Timber Systems - Ceiling & Wall Panels

Modular Timber Systems - Ceiling & Wall Panels

The timber system incorporates a unique black acoustic scrim backing which enhances sound absorption, making it ideal for architectural acoustic installations where echo reduction is critical to the comfort and amenity of the room. Our systems are designed to be modular and pre-finished allowing for ease of installation.

This proprietary design and engineering results in a linear timber finish avoiding the time consuming individual front fixing of slats on site. Panels are fire tested, VOC tested and NRC rated to offer a complete solution. Screenwood also carries PEFC certification.

Panel sizes:

• Screenwood Ceiling and Wall Panels are delivered to site pre-finished in modules 296mm wide and in lengths from 100mm–3600mm
• Panels can be cut to specified lengths with mitre cutting for bulkheads, corner and edge trims, and delivered ready for installation as required
• For panel lengths longer than 3600mm, Screenwood recommends dividing the ceiling or wall in two or more bays of panels with an expressed gap of 10mm between panels. Screenwood recommends avoiding butt joints
• A shadowline perimeter gap of 20mm is recommended where panels are placed within a coffer or adjacent to a wall

Screenwood Ceiling Panels can be used within a coffer or suspended below the existing ceiling level. Screenwood’s concealed bracketing system (patent pending) is screwed to the ceiling substrate or suspension system creating a floating ceiling effect without exposed fixings. For floating ceilings, the acoustic lining does not need to be included.

For technical information please click here.

Read more...

To contact Screenwood about Modular Timber Systems | Ceiling & Wall Panels use Get a quote.

The timber system incorporates a unique black acoustic scrim backing which enhances sound absorption, making it ideal for architectural acoustic installations where echo reduction is critical to the comfort and amenity of the room. Our systems are designed to be modular and pre-finished allowing for ease of installation.

This proprietary design and engineering results in a linear timber finish avoiding the time consuming individual front fixing of slats on site. Panels are fire tested, VOC tested and NRC rated to offer a complete solution. Screenwood also carries PEFC certification.

Panel sizes:

• Screenwood Ceiling and Wall Panels are delivered to site pre-finished in modules 296mm wide and in lengths from 100mm–3600mm
• Panels can be cut to specified lengths with mitre cutting for bulkheads, corner and edge trims, and delivered ready for installation as required
• For panel lengths longer than 3600mm, Screenwood recommends dividing the ceiling or wall in two or more bays of panels with an expressed gap of 10mm between panels. Screenwood recommends avoiding butt joints
• A shadowline perimeter gap of 20mm is recommended where panels are placed within a coffer or adjacent to a wall

Screenwood Ceiling Panels can be used within a coffer or suspended below the existing ceiling level. Screenwood’s concealed bracketing system (patent pending) is screwed to the ceiling substrate or suspension system creating a floating ceiling effect without exposed fixings. For floating ceilings, the acoustic lining does not need to be included.

For technical information please click here.

Read less...

To contact Screenwood about Modular Timber Systems | Ceiling & Wall Panels use Get a quote.