Miro Power Quality Analyser PQ45

Miro Power Quality Analyser PQ45

The PQ45 has the highest safety rating of all portable power quality analysers – CAT IV 600V. The fourth voltage channel on the PQ45 allows for ground-neutral voltage measurements. The integrated remote communication module (optional) allows the user to access the Miro unit from anywhere in the world, letting them change configurations, download data files, and view all data in real time through the online monitor. The Miro comes with the easy-to-use Citrus software which is equipped with one-click compliance reporting features.

Specifications

• Parameter

  Range

• Voltage

  Measurement 10/12 cycle rms

  Range: 10% to 150% of nominal value with accuracy of +/-0.1% of nominal value under conditions specified in IEC61000-4-30 section 6.1.

• Frequency

  Range 50Hz nominal (42.5-57.5)Hz, 60Hz nominal (51.0-69.0)Hz;

  Full range: (40-70)Hz. Measurement: 10s; Accuracy: +/-5mHz referenced to RTC, +/-1mHz referenced to GPS.

• Flicker

  IEC61000-4-15, 10 minute Pst (short term) and 2hr Plt (long term)

• Dips and Swells

  Measurement: 1-cycle rms updated every half cycle.

  Accuracy: +/-0.2% of nominal value, +/-1 cycle.

  Range (magnitude) 0 to 200%.

  Range (duration) minimum 0.5 cycles by definition. No upper limit.

• Voltage interruptions

  Measurement: 1-cycle rms updated every half cycle.

  Accuracy: +/- 1 cycle.

  Range (duration) minimum 0.5 cycles by definition. No upper limit.

• Voltage and current unbalance

  Applicable 3 phase systems and evaluated using the method of symmetrical components. Metrics: u2 = (U2/U1) and U0 = (U0/U1). U0, U1 and U2 are sequence components. Range: 0.5% to 5% of U2 and U0. Accuracy: ±0.15%.

• Power meter

  Power-kW, Power-kVA, Power-kVAR, True Power Factor (TPF), Displacement Power Factor (DPF).

• Voltage Harmonics/Interharmonics

  IEC61000-4-7, Class I (up to 50th harmonic). Range: 10% to 200% of Class 3 electromagnetic environment in IEC 61000-2-4. Metrics: voltage and current magnitude and angle.

  51st to 100th: Indication only.

• Total Harmonic Distortion (THD)

  IEC61000-4-7, THDS (up to 50th harmonic)

• Mains signalling (Ripple amplitude)

  Signal: <3kHz, user specified frequency. 20Hz bandwidth (4-nearest-bins method, adjusted automatically to correct for fundamental drift).

  Measurement: 10/12 cycle rms amplitude maximum value. Measurement range: 0%-15% of the nominal value. Detection threshold: >0.3% of nominal voltage, Duration: user defined from 1s to 300s. Trigger input to Ripple capture.

• RVC

  RVC threshold: user defined between 1% and 6% of the nominal value. RVC hysteresis: user defined and < RVC threshold.

• Underdeviation / Overdeviation

  Separately measure voltages above and below the nominal value. Metrics: RMS-under, RMS-over, %U Under and %U Over.

• Crest factor

  Indicates peak-to-rms ratio of waveform. ±1%.

• Temperature

  Two temperature channels measured each second, recording at adjustable, 10-min and 2-hour intervals. Measurement:-50°C to +150°C. Accuracy: ±1°C.

Read more...

To contact HK Calibration Technologies about Miro Power Quality Analyser PQ45 use Get a quote.

The PQ45 has the highest safety rating of all portable power quality analysers – CAT IV 600V. The fourth voltage channel on the PQ45 allows for ground-neutral voltage measurements. The integrated remote communication module (optional) allows the user to access the Miro unit from anywhere in the world, letting them change configurations, download data files, and view all data in real time through the online monitor. The Miro comes with the easy-to-use Citrus software which is equipped with one-click compliance reporting features.

Specifications

• Parameter

  Range

• Voltage

  Measurement 10/12 cycle rms

  Range: 10% to 150% of nominal value with accuracy of +/-0.1% of nominal value under conditions specified in IEC61000-4-30 section 6.1.

• Frequency

  Range 50Hz nominal (42.5-57.5)Hz, 60Hz nominal (51.0-69.0)Hz;

  Full range: (40-70)Hz. Measurement: 10s; Accuracy: +/-5mHz referenced to RTC, +/-1mHz referenced to GPS.

• Flicker

  IEC61000-4-15, 10 minute Pst (short term) and 2hr Plt (long term)

• Dips and Swells

  Measurement: 1-cycle rms updated every half cycle.

  Accuracy: +/-0.2% of nominal value, +/-1 cycle.

  Range (magnitude) 0 to 200%.

  Range (duration) minimum 0.5 cycles by definition. No upper limit.

• Voltage interruptions

  Measurement: 1-cycle rms updated every half cycle.

  Accuracy: +/- 1 cycle.

  Range (duration) minimum 0.5 cycles by definition. No upper limit.

• Voltage and current unbalance

  Applicable 3 phase systems and evaluated using the method of symmetrical components. Metrics: u2 = (U2/U1) and U0 = (U0/U1). U0, U1 and U2 are sequence components. Range: 0.5% to 5% of U2 and U0. Accuracy: ±0.15%.

• Power meter

  Power-kW, Power-kVA, Power-kVAR, True Power Factor (TPF), Displacement Power Factor (DPF).

• Voltage Harmonics/Interharmonics

  IEC61000-4-7, Class I (up to 50th harmonic). Range: 10% to 200% of Class 3 electromagnetic environment in IEC 61000-2-4. Metrics: voltage and current magnitude and angle.

  51st to 100th: Indication only.

• Total Harmonic Distortion (THD)

  IEC61000-4-7, THDS (up to 50th harmonic)

• Mains signalling (Ripple amplitude)

  Signal: <3kHz, user specified frequency. 20Hz bandwidth (4-nearest-bins method, adjusted automatically to correct for fundamental drift).

  Measurement: 10/12 cycle rms amplitude maximum value. Measurement range: 0%-15% of the nominal value. Detection threshold: >0.3% of nominal voltage, Duration: user defined from 1s to 300s. Trigger input to Ripple capture.

• RVC

  RVC threshold: user defined between 1% and 6% of the nominal value. RVC hysteresis: user defined and < RVC threshold.

• Underdeviation / Overdeviation

  Separately measure voltages above and below the nominal value. Metrics: RMS-under, RMS-over, %U Under and %U Over.

• Crest factor

  Indicates peak-to-rms ratio of waveform. ±1%.

• Temperature

  Two temperature channels measured each second, recording at adjustable, 10-min and 2-hour intervals. Measurement:-50°C to +150°C. Accuracy: ±1°C.

Read less...

To contact HK Calibration Technologies about Miro Power Quality Analyser PQ45 use Get a quote.