Micronor Accelerometer | MR660

Micronor - Accelerometer | MR660

Accelerometer | MR660

The MR660 Accelerometer provides an innovative solution to measure vibration and movement in high voltage or ATEX environments.

43 Recent Views In Stock

The MR660 Accelerometer system employs a highly sensitive MEMS membrane to provide a robust system capable of producing an output signal of 100mV/g pk-pk.

The MR660 Accelerometer is designed for a variety of customer applications such as Wind Turbine Blade, Electric Train Pantograph, and Generators & Transformers.

Micronor delivers custom tailored sensors to suit a specific application. Contact Micronor for configurations other than the standard sensors available.

Features

Sensor is EX classified “inherently safe, simple mechanical device”
Sensor can be operated in any hazardous or explosive environment – gas, dust or mines
Immune to EMI, RFI, high voltage, and magnetic fields
Low Noise Density
DIN Rail or OEM controller available
Aluminum and Ceramic Models Available

Sensor Specifications

Measurement Parameters
Frequency Response (±5%)	0.5 Hz – 1,000 Hz
Maximum Measuring Range	50 g
Noise Density
Mechanical Performance
Maximum Shock Survival	Survives up to 2,000 g
Optical Interface
Pigtail Configuration	100/140 micron Step-Index Polyimide buffered fiber terminated with Micronor’s MIC-IP Connector; Length 4.77 m
Insertion Loss	IL = 7.0dB typical
Environmental
Temperature	-25°C to +100°C (-13°F to +212°F)
Humidity	0-95% RH, Non-Condensing
Ingress Protection	IP68
Explosive Atmospheres	Inherently Safe, Simple Mechanical Device
EX Classification	The Micronor MR660 Fiber Optic Accelerometer, Isolater or Feed-Through, and Extension Cable are simple mechanical devices as per IEC 60079-28 (Inherently Safe Optical Radiation)
Physical Attributes
Housing Dimension	See Drawing
Unit Weight (Aluminum, Round Sensor)	20 g (0.0441 lbs)
Materials	Aluminum or Ceramic

For more information or a quote on the Fiber Optic Accelerometer please call or use the IndustrySearch email for a direct reply.

To contact Quality in Control P/L about Micronor Accelerometer | MR660 use Get a quote.

The MR660 Accelerometer system employs a highly sensitive MEMS membrane to provide a robust system capable of producing an output signal of 100mV/g pk-pk.

The MR660 Accelerometer is designed for a variety of customer applications such as Wind Turbine Blade, Electric Train Pantograph, and Generators & Transformers.

Micronor delivers custom tailored sensors to suit a specific application. Contact Micronor for configurations other than the standard sensors available.

Features

Sensor is EX classified “inherently safe, simple mechanical device”
Sensor can be operated in any hazardous or explosive environment – gas, dust or mines
Immune to EMI, RFI, high voltage, and magnetic fields
Low Noise Density
DIN Rail or OEM controller available
Aluminum and Ceramic Models Available

Sensor Specifications

Measurement Parameters
Frequency Response (±5%)	0.5 Hz – 1,000 Hz
Maximum Measuring Range	50 g
Noise Density
Mechanical Performance
Maximum Shock Survival	Survives up to 2,000 g
Optical Interface
Pigtail Configuration	100/140 micron Step-Index Polyimide buffered fiber terminated with Micronor’s MIC-IP Connector; Length 4.77 m
Insertion Loss	IL = 7.0dB typical
Environmental
Temperature	-25°C to +100°C (-13°F to +212°F)
Humidity	0-95% RH, Non-Condensing
Ingress Protection	IP68
Explosive Atmospheres	Inherently Safe, Simple Mechanical Device
EX Classification	The Micronor MR660 Fiber Optic Accelerometer, Isolater or Feed-Through, and Extension Cable are simple mechanical devices as per IEC 60079-28 (Inherently Safe Optical Radiation)
Physical Attributes
Housing Dimension	See Drawing
Unit Weight (Aluminum, Round Sensor)	20 g (0.0441 lbs)
Materials	Aluminum or Ceramic

For more information or a quote on the Fiber Optic Accelerometer please call or use the IndustrySearch email for a direct reply.

Read less...

To contact Quality in Control P/L about Micronor Accelerometer | MR660 use Get a quote.

Let Quality in Control P/L provide you with a quote

Supplier

Get a quote

Supplier: Quality in Control P/L

Distribution: Australia, New Zealand, Asia Pacific Only

Location: Springbrook, QLD

Customers: Liberty OneSteel , BHP, Mitsubishi, Visi-Pak

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Quality in Control P/L are also proudly displaying these credentials:

Established:

1996

Employees:

1-5

Customers:

Liberty OneSteel , BHP, Mitsubishi, Visi-Pak

Certifications:

CE, UL Certifications

Distribution:

Australia, New Zealand, Asia Pacific Only

Location:

Springbrook , QLD