MagVise - EEPM Electro-Permanent Magnetic Chucks

EEPM Electro-Permanent Magnetic Chucks

Unobstructed 5 sided machining

EEPM Electro-Permanent Magnetic Chucks

EEPM Electro-Permanent Magnetic Chucks

EEPM Electro-Permanent Magnetic Chucks

EEPM Electro-Permanent Magnetic Chucks

EEPM Series Electro-Permanent Magnetic Chucks Feature:

Super power magnetic force of 1000kgf/sq metre. (4 Poles)

3~10 seconds control for power on and off. No electric power supply is required to keep the magnetic chuck on, providing safety in the event of a power failure.

It is possible to machine 5 sides of a workpiece, with unobstructed movement of the cutter during machining. Only one cycle is required to finish a workpiece helping to achieve the best machining accuracy and increasing efficiency.

An easy and conveinent method of clamping a workpiece, reducing normal clamping time.

Applications:

Most suitable for medium and small or even rough workpieces.

Suitable for drilling and finishing machining on small workpieces.

Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts are necessary for optimum clamping.

Minimum thickness of workpiece required is 10mm.

A broader range of functions are available with the addition of Induction Blocks and Spring Blocks

To contact CNC Machinery Sales Australia about MagVise EEPM Electro-Permanent Magnetic Chucks use Get a quote.

EEPM Series Electro-Permanent Magnetic Chucks Feature:

Super power magnetic force of 1000kgf/sq metre. (4 Poles)

3~10 seconds control for power on and off. No electric power supply is required to keep the magnetic chuck on, providing safety in the event of a power failure.

It is possible to machine 5 sides of a workpiece, with unobstructed movement of the cutter during machining. Only one cycle is required to finish a workpiece helping to achieve the best machining accuracy and increasing efficiency.

An easy and conveinent method of clamping a workpiece, reducing normal clamping time.

Applications:

Most suitable for medium and small or even rough workpieces.

Suitable for drilling and finishing machining on small workpieces.

Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts are necessary for optimum clamping.

Minimum thickness of workpiece required is 10mm.

A broader range of functions are available with the addition of Induction Blocks and Spring Blocks

Read less...

To contact CNC Machinery Sales Australia about MagVise EEPM Electro-Permanent Magnetic Chucks use Get a quote.

EEPM Specifications(0.66MB)