Lift Up Floor Locks | Hammerlock

Hammerlocks

Hammerlock Lift-Up Floor Locks 900-2 or 900-4:

• Effectively stop movement by lifting one end of the wheeled equipment from the ground.
• Simple pedal on, pedal off mechanism ensures trouble-free operation
• A single floor lock is installed between the swivel castors at the operating (push) end of the trolley

Hammerlock Friction Pad Floor Locks 909-100:

The friction pad style is preferred where greater loads must be carried, or the greatest stability is needed.

Simple pedal-on, pedal-off operation

• It does NOT lift the trolley, but pushes a spring-loaded rubber pad onto the floor.
• Five millimetres of compression gives approximately 40kg of push to the 80mm diameter base.
• This is enough to lock most trolleys. If insufficient, a second lock can be mounted at the other end of the trolley
• The load capacities given assume industrial strength castors
•  Do not use on work benches, ladders or on sloped floors
• 909-125 & 909-150 Models also Available

TRL-HD Heavy duty Hammerlock Floor Lock with friction pad for greater load stability:

• Cast iron construction
• Simple pedal-on, pedal-off operation
• Use two truck locks when four swivelling castors are fitted - mount at each end between castors.
• A thick elastic rubber friction pad provides a firm grip
  Holds trolley firmly in position without lifting
  Moderate - smooth operating force
  Suitable for work platforms, servicing stands, heavy trolleys, mobile machinery, work benches & cradles.

Read more...

To contact R.J. Cox Engineering about Lift Up Floor Locks | Hammerlock use Get a quote.

Hammerlock Lift-Up Floor Locks 900-2 or 900-4:

• Effectively stop movement by lifting one end of the wheeled equipment from the ground.
• Simple pedal on, pedal off mechanism ensures trouble-free operation
• A single floor lock is installed between the swivel castors at the operating (push) end of the trolley

Hammerlock Friction Pad Floor Locks 909-100:

The friction pad style is preferred where greater loads must be carried, or the greatest stability is needed.

Simple pedal-on, pedal-off operation

• It does NOT lift the trolley, but pushes a spring-loaded rubber pad onto the floor.
• Five millimetres of compression gives approximately 40kg of push to the 80mm diameter base.
• This is enough to lock most trolleys. If insufficient, a second lock can be mounted at the other end of the trolley
• The load capacities given assume industrial strength castors
•  Do not use on work benches, ladders or on sloped floors
• 909-125 & 909-150 Models also Available

TRL-HD Heavy duty Hammerlock Floor Lock with friction pad for greater load stability:

• Cast iron construction
• Simple pedal-on, pedal-off operation
• Use two truck locks when four swivelling castors are fitted - mount at each end between castors.
• A thick elastic rubber friction pad provides a firm grip
  Holds trolley firmly in position without lifting
  Moderate - smooth operating force
  Suitable for work platforms, servicing stands, heavy trolleys, mobile machinery, work benches & cradles.

Read less...

To contact R.J. Cox Engineering about Lift Up Floor Locks | Hammerlock use Get a quote.