Laser Sensor | MEL M10 Laser Distance Sensor Get latest price

Laser Sensor | MEL M10 Distance Sensor

Laser Sensor | MEL M10 Distance Sensor

112 Recent Views Call for more details

The sensor measures on all natural surfaces, except glass and water.This speed of light sensor with its freely programmable measuring range is particularly suitable for long distances from 0.2 up to 100 meters (0.66 ft. up to 328 ft.) Further than 30 metres (98.5 ft.) with a reflexion foil.

 

The measuring module is working contactless according to the principle of phase comparison measurement.

With aid of the red pilot beam, the adjustment of the sensor is quite simple.

Inch precise measurement on any surfaces. Two types are available, with a sampling rate from 1 to 10 Hz or with 50 Hz.

 

Due to the small light point diameter (from 6 mm) (0.24 in.), measurements in narrow pipes are possible.

The electronics is integrated into the sensor head.

 

The output of measurement results are served via data interface RS232 / RS 422 (switchable). A fieldbus connection is possible. 

 

Preferred areas of application:

• height measurement
• distance measurement
• monitoring (e.g. cranes, transport systems)
• fill level measurement (e.g. bulk materials)
• position identification
• object sensing, -recordal, -control
• security application

To contact Applied Measurement Australia about Laser Sensor | MEL M10 Laser Distance Sensor use Get a quote.

The sensor measures on all natural surfaces, except glass and water.This speed of light sensor with its freely programmable measuring range is particularly suitable for long distances from 0.2 up to 100 meters (0.66 ft. up to 328 ft.) Further than 30 metres (98.5 ft.) with a reflexion foil.

 

The measuring module is working contactless according to the principle of phase comparison measurement.

With aid of the red pilot beam, the adjustment of the sensor is quite simple.

Inch precise measurement on any surfaces. Two types are available, with a sampling rate from 1 to 10 Hz or with 50 Hz.

 

Due to the small light point diameter (from 6 mm) (0.24 in.), measurements in narrow pipes are possible.

The electronics is integrated into the sensor head.

 

The output of measurement results are served via data interface RS232 / RS 422 (switchable). A fieldbus connection is possible. 

 

Preferred areas of application:

• height measurement
• distance measurement
• monitoring (e.g. cranes, transport systems)
• fill level measurement (e.g. bulk materials)
• position identification
• object sensing, -recordal, -control
• security application

Read less...

To contact Applied Measurement Australia about Laser Sensor | MEL M10 Laser Distance Sensor use Get a quote.