Laser Power Meters | Gentec-EO HP-125A-15KW

Supplier: Lastek

Handles up to 15 kW of continuous power with standard models. Custom models available for higher powers.

17 Recent Views In Stock

STABLE READING

Less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market

LARGE APERTURE

Our standard HP models (4KW, 12KW and 15KW) have a very large effective aperture up to 125 mm Ø to accomodate even the largest laser beams. Larger apertures with various shapes are available upon request (See SUPER HP).

AVAILABLE WITH YAG AND CO2 CALIBRATION

All HP Models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%

DIRECT USB CONNECTION TO A PC

Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC.

Maximum average power (continuous): 15000 W
Minimum average power¹: 500 W
Noise equivalent power²: 15 W
Spectral range: 0.193 - 20 µm
Typical rise time: 15 sec
Typical power sensitivity: 0.13 mV/W
Power calibration uncertainty: ±5 %
Repeatability: ±2 %
Back reflections: 2 - 4 %
Linearity with power: ±2 %
Linearity vs beam diameter: ±1 %
Linearity vs beam position³: ±1.0 %
- For lower powers, call your Gentec-EO representative.
- Nominal value. Actual value depends on electrical noise in the measurement system.
- For a beam size of 20% of the aperture area, moved across 80% of the aperture area.

To contact Lastek about Laser Power Meters | Gentec-EO HP-125A-15KW use Get a quote.

STABLE READING

Less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market

LARGE APERTURE

AVAILABLE WITH YAG AND CO2 CALIBRATION

All HP Models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%

DIRECT USB CONNECTION TO A PC

Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC.

Maximum average power (continuous): 15000 W
Minimum average power¹: 500 W
Noise equivalent power²: 15 W
Spectral range: 0.193 - 20 µm
Typical rise time: 15 sec
Typical power sensitivity: 0.13 mV/W
Power calibration uncertainty: ±5 %
Repeatability: ±2 %
Back reflections: 2 - 4 %
Linearity with power: ±2 %
Linearity vs beam diameter: ±1 %
Linearity vs beam position³: ±1.0 %
- For lower powers, call your Gentec-EO representative.
- Nominal value. Actual value depends on electrical noise in the measurement system.
- For a beam size of 20% of the aperture area, moved across 80% of the aperture area.

Read less...

To contact Lastek about Laser Power Meters | Gentec-EO HP-125A-15KW use Get a quote.

Let Lastek provide you with a quote

Supplier

Get a quote

Supplier: Lastek

Location: Thebarton, SA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Lastek are also proudly displaying these credentials:

Location:

Thebarton , SA

Joined:

Jul 2020

Level:

Standard Storefront

Verified:

Is this your product? Manage products / company details |

Report this product