Izumi Hydraulic Pipe Bender | PB-10N

Izumi - Hydraulic Pipe Bender | PB-10N

Supplier: Specialised Force

Hydraulic Pipe Bender | PB-10N

Izumi PB-10N Hydraulic Pipe Bender

In Stock

Izumi PB-10N Hydraulic Pipe Bender (Made in Japan)

The PB-10N (Capacity- 15-50mm (1/2 - 2")) was designed to bend various sizes and various thicknesses of steel pipes without wrinkles.

An aluminium alloy frame makes this bender lighter so that it can be easily carried to the job site.
Bending shoes are designed to bend gas pipe or steel electrical conduit listed in the charts below.
For use with any 700 bar hydraulic single-acting high-pressure pump.

PLEASE NOTE: Hydraulic Pumps & Bending Shoes Sold Separately - Unless Otherwise Indicated.

Suitable Conduits & Pipes

Thin steel conduit (A) A15 (5/8”, 16mm) to A51 (2”, 50mm) to 90° in one shot
Gas pipe (SGP) SGP15 (1/2”, 21.3mm) to SGP50 (2”, 60.3mm) to 90° in one shot

Specifications

Model No.	PB-10N PB-10N INC FORMERS
Capacity	15-50mm (1/2 - 2") Nominal Bore Pipe
Oil Volume Required	400cc
Output Force	108kN
Ram Stroke	250mm
Size	780mm Wide
Weight	18.6kg (W/O Pivot Shoes and Bender Shoe)
Includes	Frame, Cylinder, Pivot shoes (2 pieces) and Angle gauge

Bending Shoes

Steel Conduit
Model No.	(mm) OD
A15	15.9
B16	21.0
A25	25.4
A31	31.8
B36	41.9
A51	50.8

Gas Pipe
Model No.	(mm) OD
*SGP-15 - 1/2" GAS	21.3
*SGP-20 - 3/4" GAS	26.9
*SGP-25 - 1" GAS	33.7
*SGP-32 - 1 1/4" GAS	42.2
*SGP-40 - 1 1/2" GAS	48.3
*SGP-50 - 2" GAS	60.3

*Segmented bending required (to be placed on bending shoes 2 1/2 - 4")

NOTE:

Available pumps include Durapac air, battery, electric or hand pumps.
Please contact your local Specialised Force branch for details of available pumps.

Suitable Conduits & Pipes

Thin steel conduit (A) A15 (5/8”, 16mm) to A51 (2”, 50mm) to 90° in one shot
Gas pipe (SGP) SGP15 (1/2”, 21.3mm) to SGP50 (2”, 60.3mm) to 90° in one shot

Specifications

Model No.	PB-10N PB-10N INC FORMERS
Capacity	15-50mm (1/2 - 2") Nominal Bore Pipe
Oil Volume Required	400cc
Output Force	108kN
Ram Stroke	250mm
Size	780mm Wide
Weight	18.6kg (W/O Pivot Shoes and Bender Shoe)
Includes	Frame, Cylinder, Pivot shoes (2 pieces) and Angle gauge

Bending Shoes

Steel Conduit
Model No.	(mm) OD
A15	15.9
B16	21.0
A25	25.4
A31	31.8
B36	41.9
A51	50.8

Gas Pipe
Model No.	(mm) OD
*SGP-15 - 1/2" GAS	21.3
*SGP-20 - 3/4" GAS	26.9
*SGP-25 - 1" GAS	33.7
*SGP-32 - 1 1/4" GAS	42.2
*SGP-40 - 1 1/2" GAS	48.3
*SGP-50 - 2" GAS	60.3

*Segmented bending required (to be placed on bending shoes 2 1/2 - 4")

NOTE:

Available pumps include Durapac air, battery, electric or hand pumps.
Please contact your local Specialised Force branch for details of available pumps.

Read less...

To contact Specialised Force about Izumi Hydraulic Pipe Bender | PB-10N use Get a quote.

Let Specialised Force provide you with a quote

Supplier

Get a quote

Supplier: Specialised Force

Distribution: Australia & Global

Location: Carlton, NSW

Customers: Kenards Hire, Ausgrid, Prysmian Group, Optus, John Holland, RioTinto, Pilbara Iron

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Specialised Force are also proudly displaying these credentials:

Established:

1982

Employees:

51-200

Customers:

Kenards Hire, Ausgrid, Prysmian Group, Optus, John Holland, RioTinto, Pilbara Iron

Distribution:

Australia & Global

Location:

Carlton , NSW

Joined:

May 2023