Innovec Controls - IDA4 Alarm Controller Price Guide: $595

IDA4 Alarm Controller

IDA4 Alarm Controller

FEATURES

• Accepts all standard process signals

• 85 to 265VAC 47-63 Hz supply or factory fitted 24VDC isolated supply
• Microprocessor based
• Low cost - High performance
• Screw terminal electrical connection
• Four set point relays with form C contacts
• High contrast 6 digits blue OLED display of 10 mm digit height
• Din rail mount enclosure
• 24VDC loop supply for 2 wire transmitters
• Digital instrument with EEPROM storage of programmed variables and touch switch programming of input range, output on and off point, high, low or control operation, display intensity and decimal point position

• EMC compliant

 

 

 

 

 

Innovec is an ISO9001:2015 Quality Assured Company
TECHNICAL SPECIFICATIONS

Input Details

The instrument has a 16 bit bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the ratio metric measurement system. The standard instrument is set for 4-20mA and 0-10VDC operation  and can have units from 0 60,000. Other ranges are available. Please consult factory.

Outputs

• Four switch point relays are provided with form C (changeover) contacts rated at five (5) amperes 240VAC resistive.
• Each output can be configured as active high, active low with hysteresis or control alarm [output configured to be active between high and low set points].

Communication

• The IDA4 has Bluetooth or RS485 using Modbus RTU protocol communication

Display

• The IDA4 has a 6 digit 10mm character height high contrast Blue (OLED) display with a viewing distance of 3 metres.

Decimal Point

• The decimal point position is programmed from the front panel.

Environmental Parameters

• 0-70 degrees Celsius and 0-90% rh non-condensing.

Connection Details

Terminal 1: Input common (-)	Terminal 2: mA input (+)	Terminal 3: voltage input (+)
Terminal 4: 24VDC loop supply	Terminal 5: not used	Terminal 6: not used
Terminal 7: not used	Terminal 8: not used	Terminal 9: not used
Terminal 10: not used	Terminal 11: not used	Terminal 12: ma output (-)
Terminal 13: ma output (+)	Terminal 14: Voltage output (-)	Terminal 15: Voltage output (+)
Terminal 16: relay 1 common contact	Terminal 17: relay 1 normally open contact	Terminal 18: relay 1 normally closed contact
Terminal 19: relay 2 common contact	Terminal 20: relay 2 normally open contact	Terminal 21: relay AL2 normally closed contact
Terminal 22: relay AL3 common contact	Terminal 23: relay AL3 normally open contact	Terminal 24: relay AL3 normally closed contact
Terminal 25: relay 4 common contact	Terminal 26: relay AL4 normally open contact	Terminal 27: relay AL4 normally closed contact
Terminal 28: VAC active or VDC (+) supply	Terminal 29: VAC neutral or VDC(-) supply	Terminal 30: Ground supply

Instrument Power Supply

• 85 to 265VAC 47-63 Hz or factory fitted DC to DC converter from 12 to 36VDC.

Transducer Power Supply

• A 24VDC at 30mA transducer power supply.

Weight

• 400 grams.

Mounting Details

• Din rail mounting enclosure 100 mm wide by 75 mm high by 110 mm deep.

Configuration of the Instrument

• This is a digital instrument and the display intensity, decimal points, input range, relays on and off switch points and hysteresis are programmed by the front touch buttons and the values are stored in EEPROM for 10 years.

Ordering Information

• Model/input signal/display units/power supply/options.

• Sample number: IDA4/4-20mA/0-100.00/VAC
• All units shipped factory calibrated to 4-20mA equals 0-100.00 unless specified

Read more...

To contact Innovec Controls about Innovec Controls IDA4 Alarm Controller use Get a quote.

FEATURES

• Accepts all standard process signals

• 85 to 265VAC 47-63 Hz supply or factory fitted 24VDC isolated supply
• Microprocessor based
• Low cost - High performance
• Screw terminal electrical connection
• Four set point relays with form C contacts
• High contrast 6 digits blue OLED display of 10 mm digit height
• Din rail mount enclosure
• 24VDC loop supply for 2 wire transmitters
• Digital instrument with EEPROM storage of programmed variables and touch switch programming of input range, output on and off point, high, low or control operation, display intensity and decimal point position

• EMC compliant

 

 

 

 

 

Innovec is an ISO9001:2015 Quality Assured Company
TECHNICAL SPECIFICATIONS

Input Details

The instrument has a 16 bit bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the ratio metric measurement system. The standard instrument is set for 4-20mA and 0-10VDC operation  and can have units from 0 60,000. Other ranges are available. Please consult factory.

Outputs

• Four switch point relays are provided with form C (changeover) contacts rated at five (5) amperes 240VAC resistive.
• Each output can be configured as active high, active low with hysteresis or control alarm [output configured to be active between high and low set points].

Communication

• The IDA4 has Bluetooth or RS485 using Modbus RTU protocol communication

Display

• The IDA4 has a 6 digit 10mm character height high contrast Blue (OLED) display with a viewing distance of 3 metres.

Decimal Point

• The decimal point position is programmed from the front panel.

Environmental Parameters

• 0-70 degrees Celsius and 0-90% rh non-condensing.

Connection Details

Terminal 1: Input common (-)	Terminal 2: mA input (+)	Terminal 3: voltage input (+)
Terminal 4: 24VDC loop supply	Terminal 5: not used	Terminal 6: not used
Terminal 7: not used	Terminal 8: not used	Terminal 9: not used
Terminal 10: not used	Terminal 11: not used	Terminal 12: ma output (-)
Terminal 13: ma output (+)	Terminal 14: Voltage output (-)	Terminal 15: Voltage output (+)
Terminal 16: relay 1 common contact	Terminal 17: relay 1 normally open contact	Terminal 18: relay 1 normally closed contact
Terminal 19: relay 2 common contact	Terminal 20: relay 2 normally open contact	Terminal 21: relay AL2 normally closed contact
Terminal 22: relay AL3 common contact	Terminal 23: relay AL3 normally open contact	Terminal 24: relay AL3 normally closed contact
Terminal 25: relay 4 common contact	Terminal 26: relay AL4 normally open contact	Terminal 27: relay AL4 normally closed contact
Terminal 28: VAC active or VDC (+) supply	Terminal 29: VAC neutral or VDC(-) supply	Terminal 30: Ground supply

Instrument Power Supply

• 85 to 265VAC 47-63 Hz or factory fitted DC to DC converter from 12 to 36VDC.

Transducer Power Supply

• A 24VDC at 30mA transducer power supply.

Weight

• 400 grams.

Mounting Details

• Din rail mounting enclosure 100 mm wide by 75 mm high by 110 mm deep.

Configuration of the Instrument

• This is a digital instrument and the display intensity, decimal points, input range, relays on and off switch points and hysteresis are programmed by the front touch buttons and the values are stored in EEPROM for 10 years.

Ordering Information

• Model/input signal/display units/power supply/options.

• Sample number: IDA4/4-20mA/0-100.00/VAC
• All units shipped factory calibrated to 4-20mA equals 0-100.00 unless specified

Read less...

To contact Innovec Controls about Innovec Controls IDA4 Alarm Controller use Get a quote.