Infinity Pipe Systems - Aluminium Air Pipes 20mm – 110mm

Aluminium Air Pipes 20mm – 110mm

Aluminium Air Pipes 20mm – 110mm

Aluminium Air Pipes 20mm – 110mm

Aluminium Air Pipes 20mm – 110mm

Aluminium Air Pipes 20mm – 110mm

The non–corrosive extruded aluminium provides structural strength and delivers contaminate-free fluid in a leak free piping system.

The smooth bore of Infinity piping prevents high pressure losses and allows for higher flow rates and performance than that of other systems.

High Flow Range – Specifically designed for long ring main installations in large factories, the high flow series feature a cast aluminium construction, offering the same benefits as the smaller range: easy push-fit installation, minimal leakage and laminar fluid flow. Available in 63mm-110mm diameters.

• Architectural grade seamless aluminium pipe, approved for pressures up to 15 bar
• Blue colouring for compressed air piping as per Australian standards
• Light-weight tubing
• Internal and external corrosion free coating
• Complies with Australian and European safety standards
• Includes High Flow Series (63mm – 110mm) for long ring main installations in large factories

 

Code	Description	Max Flow Rate (cfm) (25m, @7bar)
900006 20	Aluminium Pipe 20mm x 6m	62
900006 25	Aluminium Pipe 25mm x 6m	124
900006 32	Aluminium Pipe 32mm x 6m	247
900006 40	Aluminium Pipe 40mm x 6m	424
900006 50	Aluminium Pipe 50mm x 6m	742
900006 63	Aluminium Pipe 63mm x 6m	1554
900006 80	Aluminium Pipe 80mm X 6m	2931
900006 110	Aluminium Pipe 110mm X 6m	3531

Technical Information

Max Pressure	15 Bar
Working Temperature Range	-20 °C to 80 °C (Fire tested in accordance with UNI EN 13501-1:2005)
Uv Effect	NONE
Extruded Aluminium	UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2
Chemical Composition	Si: 0.3 ÷ 0.6 - Mg: 0.35 ÷ 0.6 - Fe: 0.10 ÷ 0.30
Designations Uni En 573 - 3	EN AW 6060
Heat Treatment / Melting Point	DRAINED “16” / 600°C
Surface Treatment	Electrostatic painting
Specific Weight / Resistance	2.70 Kg/dm3 / 3.25 μΩ cm
Thermal Conductivity	1.75 W/(cm °K)
Expansion Coefficient	0.024mm/(m °C)
Specific Heat At 100°C	0.92 J/(g °K)
Bearing Tensile Stress	205 N/mm2
Coefficient Of Elasticity	66000 N/mm2
Proportionality Deviation Load	165 N/mm2
Brinel Hardness	60 ÷ 70 HB
Chemical Treatment	Fluorine-Zirconium - prevents corrosion from acid condensing water & sticks like a film on the internal surface of the tube.
External Coating / Internal Coating	Epoxypolyester Powder / Chemically treated with fluorine-zirconium.
Quality Features	UV resistant and fire tested in accordance with UNI EN 13501-1:2005

Read more...

To contact Pneumatics Direct Australia about Infinity Pipe Systems Aluminium Air Pipes 20mm – 110mm use Get a quote.

The non–corrosive extruded aluminium provides structural strength and delivers contaminate-free fluid in a leak free piping system.

The smooth bore of Infinity piping prevents high pressure losses and allows for higher flow rates and performance than that of other systems.

High Flow Range – Specifically designed for long ring main installations in large factories, the high flow series feature a cast aluminium construction, offering the same benefits as the smaller range: easy push-fit installation, minimal leakage and laminar fluid flow. Available in 63mm-110mm diameters.

• Architectural grade seamless aluminium pipe, approved for pressures up to 15 bar
• Blue colouring for compressed air piping as per Australian standards
• Light-weight tubing
• Internal and external corrosion free coating
• Complies with Australian and European safety standards
• Includes High Flow Series (63mm – 110mm) for long ring main installations in large factories

 

Code	Description	Max Flow Rate (cfm) (25m, @7bar)
900006 20	Aluminium Pipe 20mm x 6m	62
900006 25	Aluminium Pipe 25mm x 6m	124
900006 32	Aluminium Pipe 32mm x 6m	247
900006 40	Aluminium Pipe 40mm x 6m	424
900006 50	Aluminium Pipe 50mm x 6m	742
900006 63	Aluminium Pipe 63mm x 6m	1554
900006 80	Aluminium Pipe 80mm X 6m	2931
900006 110	Aluminium Pipe 110mm X 6m	3531

Technical Information

Max Pressure	15 Bar
Working Temperature Range	-20 °C to 80 °C (Fire tested in accordance with UNI EN 13501-1:2005)
Uv Effect	NONE
Extruded Aluminium	UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2
Chemical Composition	Si: 0.3 ÷ 0.6 - Mg: 0.35 ÷ 0.6 - Fe: 0.10 ÷ 0.30
Designations Uni En 573 - 3	EN AW 6060
Heat Treatment / Melting Point	DRAINED “16” / 600°C
Surface Treatment	Electrostatic painting
Specific Weight / Resistance	2.70 Kg/dm3 / 3.25 μΩ cm
Thermal Conductivity	1.75 W/(cm °K)
Expansion Coefficient	0.024mm/(m °C)
Specific Heat At 100°C	0.92 J/(g °K)
Bearing Tensile Stress	205 N/mm2
Coefficient Of Elasticity	66000 N/mm2
Proportionality Deviation Load	165 N/mm2
Brinel Hardness	60 ÷ 70 HB
Chemical Treatment	Fluorine-Zirconium - prevents corrosion from acid condensing water & sticks like a film on the internal surface of the tube.
External Coating / Internal Coating	Epoxypolyester Powder / Chemically treated with fluorine-zirconium.
Quality Features	UV resistant and fire tested in accordance with UNI EN 13501-1:2005

Read less...

To contact Pneumatics Direct Australia about Infinity Pipe Systems Aluminium Air Pipes 20mm – 110mm use Get a quote.