Hylec Controls - Chlorimeter Choride Field Test System

Hylec Controls' chlorimeter chloride field test for concrete systems

The test can also be used to ensure that materials used in new construction are free from potentially harmful chloride ion levels. With this method, the concentration of acid soluble chlorides is measured. In most cases, this is equivalent to total chloride concentration. A sample of powder is obtained by drilling and careful quartering. Then an accurately weighed 3gm. sample is dissolved in 20 ml of extraction liquid which consists of a precise, measured concentration of acid.

For sampling wet concrete a 3gm sample of mortar (i.e. without coarse aggregate) is used.  Typically for concrete, samples that are to be analyzed for chloride are obtained at various depths, thereby supplying the engineer with a chloride ion profile.

Features:

• Fast – Results within minutes at the site
• Economical – Low cost per sample compared to laboratory testing
• Accurate – Results are comparable to laboratory testing
• Covers wide range from 0.002% to 2% chloride by weight
• Internal Memory to store readings for later upload to a PC via USB
• Digital display for direct reading of percentage of chloride by weight
• Conforms to AASHTO-T- 260

Hylec Controls is your Quality Test Equipment Supplier & Experts in System Integration SINCE 1979.

 

***If you are not sure what you need, give us a call and quote IndustrySearch to dicuss your needs with experience mechanical engineers.

Read more...

To contact Hylec Controls about Hylec Controls Chlorimeter Choride Field Test System use Get a quote.

The test can also be used to ensure that materials used in new construction are free from potentially harmful chloride ion levels. With this method, the concentration of acid soluble chlorides is measured. In most cases, this is equivalent to total chloride concentration. A sample of powder is obtained by drilling and careful quartering. Then an accurately weighed 3gm. sample is dissolved in 20 ml of extraction liquid which consists of a precise, measured concentration of acid.

For sampling wet concrete a 3gm sample of mortar (i.e. without coarse aggregate) is used.  Typically for concrete, samples that are to be analyzed for chloride are obtained at various depths, thereby supplying the engineer with a chloride ion profile.

Features:

• Fast – Results within minutes at the site
• Economical – Low cost per sample compared to laboratory testing
• Accurate – Results are comparable to laboratory testing
• Covers wide range from 0.002% to 2% chloride by weight
• Internal Memory to store readings for later upload to a PC via USB
• Digital display for direct reading of percentage of chloride by weight
• Conforms to AASHTO-T- 260

Hylec Controls is your Quality Test Equipment Supplier & Experts in System Integration SINCE 1979.

 

***If you are not sure what you need, give us a call and quote IndustrySearch to dicuss your needs with experience mechanical engineers.

Read less...

To contact Hylec Controls about Hylec Controls Chlorimeter Choride Field Test System use Get a quote.