Hylec Controls - Marui Concrete Test Cylinder Grinder

Marui Concrete Test Cylinder Grinder

Marui Concrete Grinder Lever Operation

Marui Concrete Test Cylinder Grinder Control Panel

This is the ultimate example of the specimen end grinding machine.

This machine grinds three specimen end surfaces at one time automatically. 
It is a successful and reliable machine to reduce manpower, work time, and space to 1/3.

Not only is it a safer and healthier option, it also provides a better result in surface finish as well as flatness (within +- 0.05mm). This particular model is engineered to grind 3 samples in a single preset operating cycle.

The Marui Grinder can comfortably process low or high strength concrete with 2 only parameter setting. The ingenious diamond impregnated grinding disc incorporating an integrated rinsing function provides the operator with an output of over 50,000 25Mpa cylinders per disc. With a feed rate of 1mm per minute on 25 Mpa Concrete Test Cylinder, an output of 45 units / hour is achievable.  

Marui standard tooling allow for test cylinder diameter of 50,100,125 and 150mm.

• Concrete Test Cylinder End Grinder
• Test cylinder diameters: 50, 100, 125, 150mm
• Throughput rate: Approx. 45 cylinders/hr (25Mpa concrete, 100mm dia. cylinders)
• Cycle Time: Approx. 4 minutes for 3 x 100mm dia. cylinders
• Loading and Unloading: Manual
• Grinding cycle: Automatic or Manual
• Grinding disc life: 25,000 – 60,000 cylinders (on 25Mpa concrete)
• Ground surface: Flat within ± 0.05mm, as demanded by AS1012.9
  o Typically ~ ± 0.025mm
• Grinding Rate: 1mm/min on automatic or manual feed, based on 100mm dia. cylinders
• Wheel mechanism: Electrically controlled swing arc movement
• Wheel speed: 1800 rpm
• Services required:
  o Power: 3ph 415V 0.75kW
  o Cooling Water: 2-3lpmWeight of machine: 240kg, wheel mounted

 

***If you are not sure what you need, give us a call and quote IndustrySearch to dicuss your needs with experience mechanical engineers.

Read more...

To contact Hylec Controls about Hylec Controls Marui Concrete Test Cylinder Grinder use Get a quote.

This is the ultimate example of the specimen end grinding machine.

This machine grinds three specimen end surfaces at one time automatically. 
It is a successful and reliable machine to reduce manpower, work time, and space to 1/3.

Not only is it a safer and healthier option, it also provides a better result in surface finish as well as flatness (within +- 0.05mm). This particular model is engineered to grind 3 samples in a single preset operating cycle.

The Marui Grinder can comfortably process low or high strength concrete with 2 only parameter setting. The ingenious diamond impregnated grinding disc incorporating an integrated rinsing function provides the operator with an output of over 50,000 25Mpa cylinders per disc. With a feed rate of 1mm per minute on 25 Mpa Concrete Test Cylinder, an output of 45 units / hour is achievable.  

Marui standard tooling allow for test cylinder diameter of 50,100,125 and 150mm.

• Concrete Test Cylinder End Grinder
• Test cylinder diameters: 50, 100, 125, 150mm
• Throughput rate: Approx. 45 cylinders/hr (25Mpa concrete, 100mm dia. cylinders)
• Cycle Time: Approx. 4 minutes for 3 x 100mm dia. cylinders
• Loading and Unloading: Manual
• Grinding cycle: Automatic or Manual
• Grinding disc life: 25,000 – 60,000 cylinders (on 25Mpa concrete)
• Ground surface: Flat within ± 0.05mm, as demanded by AS1012.9
  o Typically ~ ± 0.025mm
• Grinding Rate: 1mm/min on automatic or manual feed, based on 100mm dia. cylinders
• Wheel mechanism: Electrically controlled swing arc movement
• Wheel speed: 1800 rpm
• Services required:
  o Power: 3ph 415V 0.75kW
  o Cooling Water: 2-3lpmWeight of machine: 240kg, wheel mounted

 

***If you are not sure what you need, give us a call and quote IndustrySearch to dicuss your needs with experience mechanical engineers.

Read less...

To contact Hylec Controls about Hylec Controls Marui Concrete Test Cylinder Grinder use Get a quote.