Hylec Controls - Bearingless Digital Torquemeters - Himmelstein

Bearingless Digital Torquemeter 87000

Bearingless Digital Torquemeter 86000

The Bearingless Digital Torquemeters' ability to accommodate large misalignments between the rotor and stator and to tolerate mating metal components in close proximity separates them from similar competitive offerings.

• Widest installed measurement bandwidth and fasted installed response
• Simple to install, tolerant of wide rotor-stator misalignment
• Lowest sensitivity to clamping loads
• Highest over-range and overload
• 0.03% combined non-lienarity and hysteresis
• Noise tolerant carrier amplification
• Bi-directional rotor shunt calibration
• No hoop or caliper antennae

They also offer the highest mechanical overload and electrical over-range eliminating the need to compromise accuracy for safety.

Additional characteristics include:

• an extremely stiff torsional element and high dynamic response with 3kHz bandwidth
• 0.05% Accuracy
• 200% and 400% overload
• No hoops or calipers
• Insensitive to nearby metal
• No manual adjustments
• Analogue output
• Digital Output with Temperature
• FM output
• 10 units of measure
• 11 Bessel Data Filters
• Max/Mins updated at 20kHz
• Interface software Furnished
• Zero Velocity pickup option

Himmelstein Bearingless Torquemeters use non-ISM frequencies for power and data, have field strengths within FCC rules, powerful 12
pole signal filters and near field (not radiated field) signal transfer.

 

***If you are not sure what you need, give us a call and quote IndustrySearch to dicuss your needs with experience mechanical engineers.

Read more...

To contact Hylec Controls about Hylec Controls Bearingless Digital Torquemeters - Himmelstein use Get A Quote.

The Bearingless Digital Torquemeters' ability to accommodate large misalignments between the rotor and stator and to tolerate mating metal components in close proximity separates them from similar competitive offerings.

• Widest installed measurement bandwidth and fasted installed response
• Simple to install, tolerant of wide rotor-stator misalignment
• Lowest sensitivity to clamping loads
• Highest over-range and overload
• 0.03% combined non-lienarity and hysteresis
• Noise tolerant carrier amplification
• Bi-directional rotor shunt calibration
• No hoop or caliper antennae

They also offer the highest mechanical overload and electrical over-range eliminating the need to compromise accuracy for safety.

Additional characteristics include:

• an extremely stiff torsional element and high dynamic response with 3kHz bandwidth
• 0.05% Accuracy
• 200% and 400% overload
• No hoops or calipers
• Insensitive to nearby metal
• No manual adjustments
• Analogue output
• Digital Output with Temperature
• FM output
• 10 units of measure
• 11 Bessel Data Filters
• Max/Mins updated at 20kHz
• Interface software Furnished
• Zero Velocity pickup option

Himmelstein Bearingless Torquemeters use non-ISM frequencies for power and data, have field strengths within FCC rules, powerful 12
pole signal filters and near field (not radiated field) signal transfer.

 

***If you are not sure what you need, give us a call and quote IndustrySearch to dicuss your needs with experience mechanical engineers.

Read less...

To contact Hylec Controls about Hylec Controls Bearingless Digital Torquemeters - Himmelstein use Get A Quote.