HT Instruments - JUPITER Multifunction Multimeters with RCD & Loop Impedance Test

JUPITER Multifunction Multimeters with RCD & Loop Impedance Test

JUPITER Multifunction Multimeters with RCD & Loop Impedance Test

Current Promotion also includes an AC/DC 400A Current Clamp

The first multimeter which incorporates the RCD and LOOP Impedance functions into a hand held mutlimeter.

Features 

• Test tripping time of RCDs type A and AC up to 300mA*.
• Tripping current of RCDs type AC up to 30mA.
• Non-trip earth ground resistance.
• Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
• Current up to 3000A by means of clamp-on or flexible external transducer. ›
• Dynamic inrush current of motors and loads through the DIRC function allowing time base selection. 
• Leakage current by means of the clamp-on transducer HT96U.
• Voltage and current harmonics with THD% calculation and function to the 25th Harmonic (Higher Harmonic Ordering) showing highest harmonic values first.
• One-lead phase sequence detection
• JUPITER is provided with ISO9000 calibration certificate as standard
•  

Special Promotion on this product is available.

Mention IndustrySearch and get 10% off

For more information or a quote please call or use the email for a direct reply.

 

To contact OBIAT Electronics Pty Ltd about HT Instruments JUPITER Multifunction Multimeters with RCD & Loop Impedance Test use Get a quote.

Current Promotion also includes an AC/DC 400A Current Clamp

The first multimeter which incorporates the RCD and LOOP Impedance functions into a hand held mutlimeter.

Features 

• Test tripping time of RCDs type A and AC up to 300mA*.
• Tripping current of RCDs type AC up to 30mA.
• Non-trip earth ground resistance.
• Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
• Current up to 3000A by means of clamp-on or flexible external transducer. ›
• Dynamic inrush current of motors and loads through the DIRC function allowing time base selection. 
• Leakage current by means of the clamp-on transducer HT96U.
• Voltage and current harmonics with THD% calculation and function to the 25th Harmonic (Higher Harmonic Ordering) showing highest harmonic values first.
• One-lead phase sequence detection
• JUPITER is provided with ISO9000 calibration certificate as standard
•  

Special Promotion on this product is available.

Mention IndustrySearch and get 10% off

For more information or a quote please call or use the email for a direct reply.

 

Read less...

To contact OBIAT Electronics Pty Ltd about HT Instruments JUPITER Multifunction Multimeters with RCD & Loop Impedance Test use Get a quote.