Grease Trap Interceptors

Grease Trap Interceptors

Grease traps (also known as grease interceptors) are a key feature of restaurant and food service kitchens. They are designed to trap fats, oils and grease before they enter the waste line. Grease traps prevent these contaminants from entering the pipes where they can not only solidify and cause costly blockages and backups, but also have a massive environmental impact.

Grease traps are fabricated from a minimum 6mm cast PVC or Polypropylene sheet, up to 12mm thick depending on the application. We have a standard size chart that we can email you which features the most common sizes of grease interceptors, although custom units can be built to size as well. Beyond that we can also incorporate pump wells and other plumbing hardware if required.

All PVC grease traps are fully hand welded and the Polypropylene models use an extrusion process. Above ground models are supplied with stainless steel fittings, external galvanised steel supports for reinforcement and a completely sealed lid. Screw cap access covers are often used to provide easy access and create a perfect seal. Grease interceptors can also be optioned with locking capability for outdoor use. Vents, inlets and outlets are all standard PVC sizes for easy commissioning.

Below ground models are usually supplied with Gattic lids or road covers for light, medium or heavy traffic areas, dependant on the use. The external wall face of the below ground grease traps also have provisions for concrete reinforcement rods to pass through the walls.

 

Safety first will all grease interceptors for sale

All grease traps are spark tested (electronic leak detection) before the external welds are made and pass stringent quality controls. Built to last, these grease traps are a more cost effective solution when compared to stainless steel types and ‘off the shelf’ models available. All of our grease trap models are designed to DNS international standards, strictly adhere to EPA regulations and have been approved by many Australian water authorities.

 

Read more...

To contact WaterStore Poly Tanks about Grease Trap Interceptors use Get A Quote.

Grease traps (also known as grease interceptors) are a key feature of restaurant and food service kitchens. They are designed to trap fats, oils and grease before they enter the waste line. Grease traps prevent these contaminants from entering the pipes where they can not only solidify and cause costly blockages and backups, but also have a massive environmental impact.

Grease traps are fabricated from a minimum 6mm cast PVC or Polypropylene sheet, up to 12mm thick depending on the application. We have a standard size chart that we can email you which features the most common sizes of grease interceptors, although custom units can be built to size as well. Beyond that we can also incorporate pump wells and other plumbing hardware if required.

All PVC grease traps are fully hand welded and the Polypropylene models use an extrusion process. Above ground models are supplied with stainless steel fittings, external galvanised steel supports for reinforcement and a completely sealed lid. Screw cap access covers are often used to provide easy access and create a perfect seal. Grease interceptors can also be optioned with locking capability for outdoor use. Vents, inlets and outlets are all standard PVC sizes for easy commissioning.

Below ground models are usually supplied with Gattic lids or road covers for light, medium or heavy traffic areas, dependant on the use. The external wall face of the below ground grease traps also have provisions for concrete reinforcement rods to pass through the walls.

 

Safety first will all grease interceptors for sale

All grease traps are spark tested (electronic leak detection) before the external welds are made and pass stringent quality controls. Built to last, these grease traps are a more cost effective solution when compared to stainless steel types and ‘off the shelf’ models available. All of our grease trap models are designed to DNS international standards, strictly adhere to EPA regulations and have been approved by many Australian water authorities.

 

Read less...

To contact WaterStore Poly Tanks about Grease Trap Interceptors use Get A Quote.