Graco - Lubricant Injectors | GL-43 Oil Injectors

Lubricant Injectors | GL-43 Oil Injectors

With its one piece design, Graco's GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.

Features

• Longer lasting seal design for trouble-free performance
• Precision-honed components for reliable operation in challenging environments
• Adjustable output volume from .001–.008 cubic inches (0.02–0.13 cm3) to custom fit the system to meet the needs of each lube point
• Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
• Operating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)
• Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications

GL-32 (Grease) and GL-43 (Oil) Injectors
Oil Models
Maximum Operating Pressure	68.9 bar, 6.89 MPa
Minimum Operating Pressure	51.7 bar, 5.17 MPa
Suggested Operating Pressure	58.6 bar, 5.86 MPa
Reset Pressure	10.3 bar, 1.03 MPa
Output Volume per Cycle	adjustable: 0.001 - 0.008 cubic in
Wetted Parts	carbon steel, stainless steel, copper, fluoroelastomer
Recommended Fluids	Minimum SAE 10 weight oil (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details)
Grease Models
Maximum Operating Pressure	241 bar, 24 MPa
Minimum Operating Pressure	83 bar, 8.3 MPa
Suggested Operating Pressure	172 bar, 17 MPa
Reset Pressure	14 bar, 1.4 MPa
Output Volume per Cycle	0.016 - 0.131 cc
Wetted Parts	carbon steel, stainless steel, copper, fluoroelastomer
Recommended Fluids	Grease N.L.G.I. grades #000 - #2 (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details.

 

Read more...

To contact Graco Australia about Graco Lubricant Injectors | GL-43 Oil Injectors use Get a quote.

With its one piece design, Graco's GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.

Features

• Longer lasting seal design for trouble-free performance
• Precision-honed components for reliable operation in challenging environments
• Adjustable output volume from .001–.008 cubic inches (0.02–0.13 cm3) to custom fit the system to meet the needs of each lube point
• Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
• Operating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)
• Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications

GL-32 (Grease) and GL-43 (Oil) Injectors
Oil Models
Maximum Operating Pressure	68.9 bar, 6.89 MPa
Minimum Operating Pressure	51.7 bar, 5.17 MPa
Suggested Operating Pressure	58.6 bar, 5.86 MPa
Reset Pressure	10.3 bar, 1.03 MPa
Output Volume per Cycle	adjustable: 0.001 - 0.008 cubic in
Wetted Parts	carbon steel, stainless steel, copper, fluoroelastomer
Recommended Fluids	Minimum SAE 10 weight oil (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details)
Grease Models
Maximum Operating Pressure	241 bar, 24 MPa
Minimum Operating Pressure	83 bar, 8.3 MPa
Suggested Operating Pressure	172 bar, 17 MPa
Reset Pressure	14 bar, 1.4 MPa
Output Volume per Cycle	0.016 - 0.131 cc
Wetted Parts	carbon steel, stainless steel, copper, fluoroelastomer
Recommended Fluids	Grease N.L.G.I. grades #000 - #2 (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details.

 

Read less...

To contact Graco Australia about Graco Lubricant Injectors | GL-43 Oil Injectors use Get a quote.