Graco - Lubricant Injectors | GL-1 Series Grease Injectors

Lubricant Injectors | GL-1 Series Grease Injectors

Lubricant Injectors | GL-1 Series Grease Injectors

Lubricant Injectors | GL-1 Series Grease Injectors

Lubricant Injectors | GL-1 Series Grease Injectors

Lubricant Injectors | GL-1 Series Grease Injectors

Lubricant Injectors | GL-1 Series Grease Injectors

Custom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these precision-honed systems provide years of reliable operation in the harshest operating environments.

Choose between the standard GL-1 or GL-1 HCP (High Corrosion Protection) models or for heavier duty applications that require higher output select between the GL-1 X or GL-1 XL.  

Features

• The GL-1, GL-1 HCP, GL-1 X, and GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
• Includes an adjustable hex head nut to make adjusting the ouput simple.
• No vent holes and fully enclosed press fittings to prevent leaking lubricant
• Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
• Rugged, single piece uni-body design built for the harshest environments

 

GL-1 Injectors
Maximum operating pressure	241 bar24 MPa
Suggested operating pressure	172 bar 17 MPa
Reset pressure	41 bar 4.1 MPa
Output volume per cycle	adjustable: 0.008 to 0.08 in³
Wetted parts	carbon steel, stainless steel, copper, fluoroelastomer
Recommended fluids	N.L.G.I. #2 grease down to 0°C

 

GL-1 HCP (High Corrosion Protection) Injectors
Maximum operating pressure	24.1 MPa, 241 bar
Suggested operating pressure	17.2 MPa, 172 bar
Reset pressure	4.1 MPa, 41 bar
Output volume per cycle	adjustable: 0.008 to 0.08 cubic inches
Wetted parts	carbon steel, stainless steel, fluoroelastomer
Recommended fluids	N.L.G.I. #2 grease down to 0°C

 

Read more...

To contact Graco Australia about Graco Lubricant Injectors | GL-1 Series Grease Injectors use Get a quote.

Custom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these precision-honed systems provide years of reliable operation in the harshest operating environments.

Choose between the standard GL-1 or GL-1 HCP (High Corrosion Protection) models or for heavier duty applications that require higher output select between the GL-1 X or GL-1 XL.  

Features

• The GL-1, GL-1 HCP, GL-1 X, and GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
• Includes an adjustable hex head nut to make adjusting the ouput simple.
• No vent holes and fully enclosed press fittings to prevent leaking lubricant
• Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
• Rugged, single piece uni-body design built for the harshest environments

 

GL-1 Injectors
Maximum operating pressure	241 bar24 MPa
Suggested operating pressure	172 bar 17 MPa
Reset pressure	41 bar 4.1 MPa
Output volume per cycle	adjustable: 0.008 to 0.08 in³
Wetted parts	carbon steel, stainless steel, copper, fluoroelastomer
Recommended fluids	N.L.G.I. #2 grease down to 0°C

 

GL-1 HCP (High Corrosion Protection) Injectors
Maximum operating pressure	24.1 MPa, 241 bar
Suggested operating pressure	17.2 MPa, 172 bar
Reset pressure	4.1 MPa, 41 bar
Output volume per cycle	adjustable: 0.008 to 0.08 cubic inches
Wetted parts	carbon steel, stainless steel, fluoroelastomer
Recommended fluids	N.L.G.I. #2 grease down to 0°C

 

Read less...

To contact Graco Australia about Graco Lubricant Injectors | GL-1 Series Grease Injectors use Get a quote.