Nivus - Flow Meter for Wastewater Get latest price

Flow Meter for Wastewater

60 Recent Views In Stock

Flow Measurement 1st Scan

The flow velocity determination method is based on the ultrasonic reflection principle.
One of the most modern and most efficient flow velocity measurement methods is the NIVUS correlation method. The reflecting particles contained within the medium (debris, min­erals or gas bubbles) are scanned using an ultrasonic impulse transmitted in a defined angle. The resulting echo is then saved as image or echo pattern.

Flow Measurement 2nd Scan

The echo pattern of a second scan a few milliseconds later is saved as well.

Cross Correlation Comparison 1st and 2nd Scan

The positions of the reflecting particles is determined by correlating/comparing both saved signals. The particles can be found in different positions in both images since they move with the medium. Considering the beam angle it is possible to directly convert the temporal shift of the particles into their velocity which is equal to the flow velocity of the medium.
This allows gaining high accurate measurement values without calibration measures.

Cross Correlation Flow Profile Calculation

Our measurment systems utilise up to 9 x 16 gates for flow measurement. The measured flow profile can be indicated directly on the display.
 

***If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs with qualified engineers.

Read more...

To contact Autech Control Group about Nivus Flow Meter for Wastewater use Get a quote.

Flow Measurement 1st Scan

The flow velocity determination method is based on the ultrasonic reflection principle.
One of the most modern and most efficient flow velocity measurement methods is the NIVUS correlation method. The reflecting particles contained within the medium (debris, min­erals or gas bubbles) are scanned using an ultrasonic impulse transmitted in a defined angle. The resulting echo is then saved as image or echo pattern.

Flow Measurement 2nd Scan

The echo pattern of a second scan a few milliseconds later is saved as well.

Cross Correlation Comparison 1st and 2nd Scan

The positions of the reflecting particles is determined by correlating/comparing both saved signals. The particles can be found in different positions in both images since they move with the medium. Considering the beam angle it is possible to directly convert the temporal shift of the particles into their velocity which is equal to the flow velocity of the medium.
This allows gaining high accurate measurement values without calibration measures.

Cross Correlation Flow Profile Calculation

Our measurment systems utilise up to 9 x 16 gates for flow measurement. The measured flow profile can be indicated directly on the display.
 

***If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs with qualified engineers.

Read less...

To contact Autech Control Group about Nivus Flow Meter for Wastewater use Get a quote.