FLIR Ball Probe Moisture Meter | MR59
FLIR MR59 is a high-quality, reliable, and easy-to-use moisture-detection tool. Wireless connectivity makes it easy to view readings on a mobile device from the FLIR Tools® Mobile app when the meter’s display is out of view. Thanks to the ball-probe sensor, the user can cover a large area in a short time without making a mark; measure into corners, over uneven surfaces, and around baseboards; and detect problems below the
surface. The MR59 is a reliable standalone meter—or a useful accessory to pair with a FLIR thermal imager.
LOCATE HIDDEN MOISTURE EFFICIENTLY
Survey large areas quickly and non-destructively
• Easily run the meter over and around objects on the measuring surface with the ball-probe sensor
• Create a heat map of the affected area and follow the migration path to a hidden source of moisture
• Identify potential moisture problems up to 100 mm (4 in) below the surface
INSPECT ANYWHERE WITH EASE
Designed to make your job easier and more efficient
• Wirelessly connect the meter to FLIR Tools Mobile to view readings on a mobile device
• Work in dim lighting with the backlit display and bright worklight
• Use with the MR04 extension pole to reduce the need for a ladder, or to optimize ergonomics for ‘high’ and ‘low’ measuring targets (accessory not included)
RELY ON THIS METER TO GET THE JOB DONE
Take the durable, drop-tested meter to every job
• Detect moisture in a wide range of common building materials
• Receive stable, repeatable readings. The meter’s handgrip is designed to prevent hands from interfering with measurements
• Take advantage of product enhancements by upgrading firmware as needed via micro USB port (located in battery compartment)
SPECIFICATIONS | ||
Moisture Measurement | Range | Accuracy |
Moisture | 0 - 100% | Relative measurement |
Measurement Detection Depth | Up to 100 mm (4 in) depending upon material under test | |
General Information | ||
Connectivity | Bluetooth BLE Communications Protocol: METERLiNK® |
|
Worklight | White LED | |
Display | Backlit, multifunction LCD | |
Measurement Principle | Capacitive (non-invasive) | |
Warranty | Limited 3 years | |
Battery Type | 9 V battery | |
Battery Life | Typical 40 hours without worklight | |
Battery Status Indicator | 4-bar battery icon (100% to empty) | |
Auto Power Off (APO) After 30 minutes | ||
Operating RH/Temperature | 90%, 0°C to 30°C 75%, 30°C to 40°C 45%, 40°C to 50°C |
|
IP Rating | IP40 | |
Safety Compliance | CE, RCM, FCC/IC | |
Drop Test | 2 m | |
Housing Material | Impact-resistant plastic | |
Weight | 245 g (8.6 oz) | |
Dimensions | 240.5 x 67 x 38 mm |
To contact Teledyne FLIR about FLIR Ball Probe Moisture Meter | MR59 use Get a quote.
FLIR MR59 is a high-quality, reliable, and easy-to-use moisture-detection tool. Wireless connectivity makes it easy to view readings on a mobile device from the FLIR Tools® Mobile app when the meter’s display is out of view. Thanks to the ball-probe sensor, the user can cover a large area in a short time without making a mark; measure into corners, over uneven surfaces, and around baseboards; and detect problems below the
surface. The MR59 is a reliable standalone meter—or a useful accessory to pair with a FLIR thermal imager.
LOCATE HIDDEN MOISTURE EFFICIENTLY
Survey large areas quickly and non-destructively
• Easily run the meter over and around objects on the measuring surface with the ball-probe sensor
• Create a heat map of the affected area and follow the migration path to a hidden source of moisture
• Identify potential moisture problems up to 100 mm (4 in) below the surface
INSPECT ANYWHERE WITH EASE
Designed to make your job easier and more efficient
• Wirelessly connect the meter to FLIR Tools Mobile to view readings on a mobile device
• Work in dim lighting with the backlit display and bright worklight
• Use with the MR04 extension pole to reduce the need for a ladder, or to optimize ergonomics for ‘high’ and ‘low’ measuring targets (accessory not included)
RELY ON THIS METER TO GET THE JOB DONE
Take the durable, drop-tested meter to every job
• Detect moisture in a wide range of common building materials
• Receive stable, repeatable readings. The meter’s handgrip is designed to prevent hands from interfering with measurements
• Take advantage of product enhancements by upgrading firmware as needed via micro USB port (located in battery compartment)
SPECIFICATIONS | ||
Moisture Measurement | Range | Accuracy |
Moisture | 0 - 100% | Relative measurement |
Measurement Detection Depth | Up to 100 mm (4 in) depending upon material under test | |
General Information | ||
Connectivity | Bluetooth BLE Communications Protocol: METERLiNK® |
|
Worklight | White LED | |
Display | Backlit, multifunction LCD | |
Measurement Principle | Capacitive (non-invasive) | |
Warranty | Limited 3 years | |
Battery Type | 9 V battery | |
Battery Life | Typical 40 hours without worklight | |
Battery Status Indicator | 4-bar battery icon (100% to empty) | |
Auto Power Off (APO) After 30 minutes | ||
Operating RH/Temperature | 90%, 0°C to 30°C 75%, 30°C to 40°C 45%, 40°C to 50°C |
|
IP Rating | IP40 | |
Safety Compliance | CE, RCM, FCC/IC | |
Drop Test | 2 m | |
Housing Material | Impact-resistant plastic | |
Weight | 245 g (8.6 oz) | |
Dimensions | 240.5 x 67 x 38 mm |
To contact Teledyne FLIR about FLIR Ball Probe Moisture Meter | MR59 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product