Fiessler Elektronik Safety Contact Floor Mats

Fiessler Elektronik Safety Contact Floor Mats

The switching mat can be individually adapted to the area which has to be secured. With the help of the closed-circuit-principle a constant monitoring of the safety contact edge is insured. Fiessler Safety Pressure Mats and Switch gear correspond to the following safety regulations:

IEC 61508, ISO 13849-1, EN 954-1

The STM safety contact-making mat is fitted with two two-core connecting cables and offers the possibility of connecting several mats in series up to a maximum total area of 10 m2. One end of the cable is connected to the evaluation electronics and the terminal resistance is connected to the other end (prepared accordingly at the factory). The electronics now monitor the entire conductor route, including the mats, through to the terminal resistance. The contact-making surfaces make contact in the event of external forces acting on the mat and the resistance is bridged. This immediately causes a signal within the electronics that is then given as a potential-free output for contact-making by the relay. The entire switching arrangement is monitored at the same time for cable rupture or manipulation.

 

Standart mats
Typ	STM	STM-AL	STM-V2A
Running cover	EPDM	Aluminium	high grade steel
style	nap cover	checkered cover	teardrop metal steel
Material thickness	3 mm	3,5 mm	2,7 mm
Delivery length	2,35m x 1,35 m	2,35m x 1,35 m	2,35m x 1,35 m
Dimensions	available on request !
Weight Kg/m(2)	15	7 + Aluminium cover	11,6 + high grade steel cover
Equipment >> (optional with cast ramp rail available)	AL - Ramp rail RS14 AL - End rail BS 14

 

Sensor Measurement is a supplier of Fiessler Elektronik Safety Contact Floor Mats. For more information please contact us.

 

 

Read more...

To contact Sensor Measurement about Fiessler Elektronik Safety Contact Floor Mats use Get a quote.

The switching mat can be individually adapted to the area which has to be secured. With the help of the closed-circuit-principle a constant monitoring of the safety contact edge is insured. Fiessler Safety Pressure Mats and Switch gear correspond to the following safety regulations:

IEC 61508, ISO 13849-1, EN 954-1

The STM safety contact-making mat is fitted with two two-core connecting cables and offers the possibility of connecting several mats in series up to a maximum total area of 10 m2. One end of the cable is connected to the evaluation electronics and the terminal resistance is connected to the other end (prepared accordingly at the factory). The electronics now monitor the entire conductor route, including the mats, through to the terminal resistance. The contact-making surfaces make contact in the event of external forces acting on the mat and the resistance is bridged. This immediately causes a signal within the electronics that is then given as a potential-free output for contact-making by the relay. The entire switching arrangement is monitored at the same time for cable rupture or manipulation.

 

Standart mats
Typ	STM	STM-AL	STM-V2A
Running cover	EPDM	Aluminium	high grade steel
style	nap cover	checkered cover	teardrop metal steel
Material thickness	3 mm	3,5 mm	2,7 mm
Delivery length	2,35m x 1,35 m	2,35m x 1,35 m	2,35m x 1,35 m
Dimensions	available on request !
Weight Kg/m(2)	15	7 + Aluminium cover	11,6 + high grade steel cover
Equipment >> (optional with cast ramp rail available)	AL - Ramp rail RS14 AL - End rail BS 14

 

Sensor Measurement is a supplier of Fiessler Elektronik Safety Contact Floor Mats. For more information please contact us.

 

 

Read less...

To contact Sensor Measurement about Fiessler Elektronik Safety Contact Floor Mats use Get a quote.