Ferrite Meter | MF300Fe+ for sale from Russell Fraser Sales NDT

Ferrite Meter | MF300Fe+

The new Diverse Ferrite meter MF300Fe+ measures the Ferrite number (FN) of austenitic and duplex stainless steel weld material.

Receive 1-3 days from order

Industrial processing and chemical plants work at high temperatures and pressures, with often aggressive media and stainless steel is often the material of choice for these applications. If the ferrite content of the steel is too low, then welding of stainless material may crack at elevated temperature or with high stress or vibration. Alternatively, if the ferrite content is too high, the weld may be weaker and corrode.

To address the need to measure the amount of ferrite in a sample the Welding Research Council introduced the Ferrite Number (FN) as standardised value which related to the ferrite content of an equivalently magnetic weld metal.

It has a probe that is sensitive to ferrite content in a 10 mm area to a depth of approximately 1 mm. The instrument is calibrated using the secondary weld standards validated by National Institute of Standards and Technology (NIST) in the USA. All 16 standards are used in the calibration giving an instrument with a measurement range from 0 to 115 FN. Transfer standards are supplied with the instrument allowing performance to be verified at any time.

Features:

Non-destructive test of the ferrite content in a range of 0.1 to 115 FN equivalent to 0.1 to 80.5% Fe in austenitic and duplex steel.
Robust and portable
Standard or peak measurement of Ferrite Number
Estimate of ferrite percentage (70% of FN)
Automatic zero on demand
Supplied with 5 transfer standards allowing veracity of instrument to be checked
Storage of 1000 measurements including 4 character record ID, downloaded to PC with RS232/USB (option)
Use with high temperature samples (air-cooled probe option)
Simple measurement with small sample area.
Units selectable between WRC-FN and %Fe.
Calibration to weld standards validated by NIST
Supplied in carry case

To contact Russell Fraser Sales NDT about Ferrite Meter | MF300Fe+ use Get a quote.

Features:

Non-destructive test of the ferrite content in a range of 0.1 to 115 FN equivalent to 0.1 to 80.5% Fe in austenitic and duplex steel.
Robust and portable
Standard or peak measurement of Ferrite Number
Estimate of ferrite percentage (70% of FN)
Automatic zero on demand
Supplied with 5 transfer standards allowing veracity of instrument to be checked
Storage of 1000 measurements including 4 character record ID, downloaded to PC with RS232/USB (option)
Use with high temperature samples (air-cooled probe option)
Simple measurement with small sample area.
Units selectable between WRC-FN and %Fe.
Calibration to weld standards validated by NIST
Supplied in carry case

Read less...

To contact Russell Fraser Sales NDT about Ferrite Meter | MF300Fe+ use Get a quote.

Let Russell Fraser Sales NDT provide you with a quote

Supplier

Get a quote

Supplier: Russell Fraser Sales NDT

Distribution: Australia & New Zealand

Location: Kirrawee, NSW

Customers: APA, Dept Defence, Rio Tinto, One Steel, ALS

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Russell Fraser Sales NDT are also proudly displaying these credentials:

Established:

1993

Employees:

6-20

Customers:

APA, Dept Defence, Rio Tinto, One Steel, ALS

Memberships:

AINDT, ACA , APGA, AFI

Distribution:

Australia & New Zealand

Location:

Kirrawee , NSW