Absorb Environmental Solutions - Drain Protection to Absorb Oil and Retain Sediments | Drain Warden

Drain Protection - Drain Warden

The Drain Warden is inserted beneath the grate of your storm water inlet to give you erosion and pollution control. The polypropylene fabric traps contaminants. The oil absorbent boom will not deteriorate or release absorbed hydrocarbons.

If the filter fabric becomes contaminated with hydrocarbons, the mini-boom captures them but allows water to escape. Sediments and heavy solids settle and are contained in the bottom of the Warden. It can hold up to 20 litres in an emergency spill, giving you time to put in place your spill response and block drain outlets.

The Drain Warden can be cut to fit smaller drain widths. The standard Drain Warden has a drop of 600mm, for shallow drain pits an alternative size is available with a drop of 250mm.

The Drain Warden is ideal for:
Protecting the storm drains from low level contamination. It assures more response time for larger spill emergencies

Tips for the use of the Drain Warden:

• It will only remove hydrocarbons and particulates from stormwater run off. For water-based liquids and hazardous chemicals try our hazchem booms
• Maintain the Warden to remove particle contaminants
• The Warden restricts the flow rate into the drain slightly

For more information or a quote please call or use the IndustySearch email form for a direct reply.

 

To contact Absorb Environmental Solutions about Absorb Environmental Solutions Drain Protection to Absorb Oil and Retain Sediments | Drain Warden use Get a quote.

The Drain Warden is inserted beneath the grate of your storm water inlet to give you erosion and pollution control. The polypropylene fabric traps contaminants. The oil absorbent boom will not deteriorate or release absorbed hydrocarbons.

If the filter fabric becomes contaminated with hydrocarbons, the mini-boom captures them but allows water to escape. Sediments and heavy solids settle and are contained in the bottom of the Warden. It can hold up to 20 litres in an emergency spill, giving you time to put in place your spill response and block drain outlets.

The Drain Warden can be cut to fit smaller drain widths. The standard Drain Warden has a drop of 600mm, for shallow drain pits an alternative size is available with a drop of 250mm.

The Drain Warden is ideal for:
Protecting the storm drains from low level contamination. It assures more response time for larger spill emergencies

Tips for the use of the Drain Warden:

• It will only remove hydrocarbons and particulates from stormwater run off. For water-based liquids and hazardous chemicals try our hazchem booms
• Maintain the Warden to remove particle contaminants
• The Warden restricts the flow rate into the drain slightly

For more information or a quote please call or use the IndustySearch email form for a direct reply.

 

Read less...

To contact Absorb Environmental Solutions about Absorb Environmental Solutions Drain Protection to Absorb Oil and Retain Sediments | Drain Warden use Get a quote.

AES DW 1.2 - Drain Warden (0.35MB)

Absorb Enviro Product Catalogue 2021(5.68MB)