Cone and Plate Viscometer

Cone and Plate Viscometer

As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM).

The Cone and Plate Viscometer (CP1) is a standard test for dynamic viscosity measurements. It is faster and more accurate by use of new high precision microprocessor controls. As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM). These are generally accepted to be representative of paint application via a roller or brush and so reflect ‘real world’ application.

Temperature controlled

As most viscosity measurements are highly temperature sensitive the samples are placed on a temperature controlled plate which can be set from 5°C to 65°C.

 

To contact Revco Australia about Cone and Plate Viscometer use Get a quote.

As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM).

The Cone and Plate Viscometer (CP1) is a standard test for dynamic viscosity measurements. It is faster and more accurate by use of new high precision microprocessor controls. As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM). These are generally accepted to be representative of paint application via a roller or brush and so reflect ‘real world’ application.

Temperature controlled

As most viscosity measurements are highly temperature sensitive the samples are placed on a temperature controlled plate which can be set from 5°C to 65°C.

 

Read less...

To contact Revco Australia about Cone and Plate Viscometer use Get a quote.