Koenig - CO2 Laser Machine | K1325M Price Guide: $43,450 Get latest price

CO2 Laser Machine | K1325M

CO2 Laser Machine | K1325M

CO2 Laser Machine | K1325M

CO2 Laser Machine | K1325M

CO2 Laser Machine | K1325M

CO2 Laser Machine | K1325M

In Stock

HIGHLIGHTS

• Open industrial unit for full size sheet cutting
• Precision ball screw drive
• Ball rollers at front and rear of machine for sheet loading
• In-line beam combiner for easy mirror alignment and set-up
• Automatic height adjust as standard
• Conical table for better extraction and clean up drawer
• Water chiller, compressor and extraction fan included
• PC or Mac compatible - RDworks or Lightburn Software provided

FEATURES

With a choice between 150W or 280W power the K1325M metal and non-metal laser cutting machine provides high speed, high power cutting.

The 150W allows you to cut up to 18mm acrylic and 20mm mdf/ply in one pass and up to 1.5mm mild steel and 1mm stainless steel. The 280W allows you to cut up to 30mm acrylic and 25mm mdf/ply in one pass and up to 2.5mm mild steel and 2mm stainless steel. With the 280W you'll also be able to cut standard thinner materials (e.g. 3mm acrylic) at up to twice the speed of a standard 150W machine, reducing production time by up to 50%!

With our surface tracking laser head, cutting metal is a breeze. The head will track the metal surface accurately over warps or bends, providing consistent cutting and gas pressure.

This open industrial unit allows for full size sheet cutting. Using materials in their full sheet form saves on cutting cost and time whilst also reducing operator work-load.

Ball rollers at the front and rear of the machine provide a sliding surface for loading and un-loading sheet materials. Sheets can be loaded easily by one operator (depending on weight) without scratching or damaging materials.

The precision ball screw drive provides higher accuracy cutting and engraving when compared to standard belt drive systems. The higher acceleration and deceleration that this machine offers is particularly important for metal cutting because it ensures consistency of cutting depth and smoother travel for a cleaner edge.

There is a conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture parts or offcuts and channel them into the clean-up drawer

LED internal lighting allows you to easily view your workpiece by looking through the protective lid.

Our S&A CW6000 water chiller is included with both the 150W and 280W machine. A standard compressor and extraction fan are also included. Ask us about our software integrated high-powered compressor option for optimal quality clean cutting, and our air filtration units for filtering all particles and fumes from the air (recommended for office and at home machine set-up).

We now provide both RDworks and Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamlined design process. The Lightburn software package features easy, intuitive functionality. 

Our K1325M machine has been designed with a solid welded chasis frame. Please review the dimensions of the machine and consider access from the front or back of the machine if loading using the ball bearing assistance. Please note a forkilft will be required on site for offload during delivery.

WHY CHOOSE KOENIG?

- Dedicated Australian technical support, with local on-site technician for set-up or when required.

- FREE lifetime technical support for the lifetime of the machine over the phone, email or remote computer access (on-site service available)

- 1 year Warranty covering all machine parts + 9 month laser tube warranty.

Specifications:

Technical Parameters	Specification
Laser Power	150W (280W available)
Cutting Area	1300 x 2500mm (1500 x 3000mm available)
Z Axis	Static table, 40mm max cut
Laser Type	Yongli laser tube 10.6μm – up to 10,000 hour life
Machine Footprint (total size)	1850(W) x 3600(D) x 1300(H)mm
Machine Weight	1500kg
Table Type	Saw tooth knife bed table included (optional honeycomb table available)
Motor Type	Precision Stepper Motor
Drive Type	Taiwan TBI ball screw drive – High precision drive system
Ventilation	Fan and extraction hosing provided (4 stage air filters optional)
Cooling Type	S&A CW6000 enclosed water chilling unit included
Engraving Speed	Up to 100mm/s – not recommended for regular engraving
Cutting Speed	Up to 300mm/s
Min. Engraving Size	1.0mm*1.0mm
Locating Accuracy	≤+0.05mm
Controlling Software	DSP Control System
Software	RDworks or Lightburn
Computer Compatibility	Windows (32 or 64-bit)
Graphic Format Supported	DXF DWG AI PDF DST PLT BMP JPG PNG etc.
Machine file memory	128MB internal memory (up to 100 files)
Power Supply	230V 50Hz 15amp

Read more...

To contact Koenig Machinery about Koenig CO2 Laser Machine | K1325M use Get a quote.

HIGHLIGHTS

• Open industrial unit for full size sheet cutting
• Precision ball screw drive
• Ball rollers at front and rear of machine for sheet loading
• In-line beam combiner for easy mirror alignment and set-up
• Automatic height adjust as standard
• Conical table for better extraction and clean up drawer
• Water chiller, compressor and extraction fan included
• PC or Mac compatible - RDworks or Lightburn Software provided

FEATURES

With a choice between 150W or 280W power the K1325M metal and non-metal laser cutting machine provides high speed, high power cutting.

The 150W allows you to cut up to 18mm acrylic and 20mm mdf/ply in one pass and up to 1.5mm mild steel and 1mm stainless steel. The 280W allows you to cut up to 30mm acrylic and 25mm mdf/ply in one pass and up to 2.5mm mild steel and 2mm stainless steel. With the 280W you'll also be able to cut standard thinner materials (e.g. 3mm acrylic) at up to twice the speed of a standard 150W machine, reducing production time by up to 50%!

With our surface tracking laser head, cutting metal is a breeze. The head will track the metal surface accurately over warps or bends, providing consistent cutting and gas pressure.

This open industrial unit allows for full size sheet cutting. Using materials in their full sheet form saves on cutting cost and time whilst also reducing operator work-load.

Ball rollers at the front and rear of the machine provide a sliding surface for loading and un-loading sheet materials. Sheets can be loaded easily by one operator (depending on weight) without scratching or damaging materials.

The precision ball screw drive provides higher accuracy cutting and engraving when compared to standard belt drive systems. The higher acceleration and deceleration that this machine offers is particularly important for metal cutting because it ensures consistency of cutting depth and smoother travel for a cleaner edge.

There is a conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture parts or offcuts and channel them into the clean-up drawer

LED internal lighting allows you to easily view your workpiece by looking through the protective lid.

Our S&A CW6000 water chiller is included with both the 150W and 280W machine. A standard compressor and extraction fan are also included. Ask us about our software integrated high-powered compressor option for optimal quality clean cutting, and our air filtration units for filtering all particles and fumes from the air (recommended for office and at home machine set-up).

We now provide both RDworks and Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamlined design process. The Lightburn software package features easy, intuitive functionality. 

Our K1325M machine has been designed with a solid welded chasis frame. Please review the dimensions of the machine and consider access from the front or back of the machine if loading using the ball bearing assistance. Please note a forkilft will be required on site for offload during delivery.

WHY CHOOSE KOENIG?

- Dedicated Australian technical support, with local on-site technician for set-up or when required.

- FREE lifetime technical support for the lifetime of the machine over the phone, email or remote computer access (on-site service available)

- 1 year Warranty covering all machine parts + 9 month laser tube warranty.

Specifications:

Technical Parameters	Specification
Laser Power	150W (280W available)
Cutting Area	1300 x 2500mm (1500 x 3000mm available)
Z Axis	Static table, 40mm max cut
Laser Type	Yongli laser tube 10.6μm – up to 10,000 hour life
Machine Footprint (total size)	1850(W) x 3600(D) x 1300(H)mm
Machine Weight	1500kg
Table Type	Saw tooth knife bed table included (optional honeycomb table available)
Motor Type	Precision Stepper Motor
Drive Type	Taiwan TBI ball screw drive – High precision drive system
Ventilation	Fan and extraction hosing provided (4 stage air filters optional)
Cooling Type	S&A CW6000 enclosed water chilling unit included
Engraving Speed	Up to 100mm/s – not recommended for regular engraving
Cutting Speed	Up to 300mm/s
Min. Engraving Size	1.0mm*1.0mm
Locating Accuracy	≤+0.05mm
Controlling Software	DSP Control System
Software	RDworks or Lightburn
Computer Compatibility	Windows (32 or 64-bit)
Graphic Format Supported	DXF DWG AI PDF DST PLT BMP JPG PNG etc.
Machine file memory	128MB internal memory (up to 100 files)
Power Supply	230V 50Hz 15amp

Read less...

To contact Koenig Machinery about Koenig CO2 Laser Machine | K1325M use Get a quote.