Harrier - Chemical Injection System Controllers Get latest price

Chemical Injection System Controllers

Chemical Injection System Controllers

Chemical Injection System Controllers

In Stock

Closely control and monitor chemical critical operating information for reducing costs and improving processes. It's easy, efficient and productive – saving you time and money.

FEATURES

• Simple user interface for setup and control. Enter your desired injection rate and let Graco do the rest.
• The Harrier+ control includes remote connectivity, allowing you to monitor, control and calibrate your system away from your injection site via cellular or ModBus.
• Easily monitors your system for control, troubleshooting, maintenance needs and alerts.
• Patent pending adaptive flow control technology maintains a consistent injection rate, regardless of system variables, reducing waste and costs.
• Multiple inputs for system controls allow you to only run when it’s necessary.

Harrier EZ and Harrier

• Used for DC pumps
• Control injection rates via timer or cycle count
• ETL listed for electrical safety: UL 508 and CSA 22.2 No. 14
• On/Off time setting intervals from 0-999 seconds 
• Built-in low voltage disconnect functionality
• Battery voltage display 
• Prime mode for pump priming during setup 

Harrier AC                                                                              

• Used with AC operated pumps                                                
• Pump-mount and wall-mount option                                        
• Control injection rates via timer or cycle count                          
• Auxiliary input port                                                  
• ETL listed for electrical safety to UL 508 and CSA 22.2 No. 14 
• NEMA 4X enclosure

Harrier+

• Used for AC and DC pumps
• Control injection rates via timer, cycle count or flow control
• Easy to read display that operates at temperatures as low as -40°F (-40°C)
• CDMA and GSM cellular connectivity
• ETL listed for electrical safety: UL 508 and CSA 22.2 No. 14

 

Harrier Chemical Injection Controller
Power Source DC	9 - 26 VDC
Power Consumption	1 Watt
Cycle/Pressure Control Input (optional)	9 - 26 VDC, Normally open or cycle switch
Auxiliary Input (optional)	Normally open switch
Protection grade	IP54 for indoors
Enclosure Material	Polycarbonate + PET
Membrane Material	Polyester
Maximum Humidity	90% Relative Humidity (non-condensing)
Operating Temperature Range	- 40°C to 55°C
Storage Temperature	- 40°C to 80°C)
Input Contact
Power Source DC	9 - 26 VDC
Outputs
Pump control	Pump Control Voltage = Power Source
Voltage	Pump Control Voltage = Power Source
Maximum Switching Voltage	26 VDC
Maximum Switching Current	16A (DC)
Minimum Switching Current	100 mA (DC)

 

Read more...

To contact Graco Australia about Harrier Chemical Injection System Controllers use Get a quote.

Closely control and monitor chemical critical operating information for reducing costs and improving processes. It's easy, efficient and productive – saving you time and money.

FEATURES

• Simple user interface for setup and control. Enter your desired injection rate and let Graco do the rest.
• The Harrier+ control includes remote connectivity, allowing you to monitor, control and calibrate your system away from your injection site via cellular or ModBus.
• Easily monitors your system for control, troubleshooting, maintenance needs and alerts.
• Patent pending adaptive flow control technology maintains a consistent injection rate, regardless of system variables, reducing waste and costs.
• Multiple inputs for system controls allow you to only run when it’s necessary.

Harrier EZ and Harrier

• Used for DC pumps
• Control injection rates via timer or cycle count
• ETL listed for electrical safety: UL 508 and CSA 22.2 No. 14
• On/Off time setting intervals from 0-999 seconds 
• Built-in low voltage disconnect functionality
• Battery voltage display 
• Prime mode for pump priming during setup 

Harrier AC                                                                              

• Used with AC operated pumps                                                
• Pump-mount and wall-mount option                                        
• Control injection rates via timer or cycle count                          
• Auxiliary input port                                                  
• ETL listed for electrical safety to UL 508 and CSA 22.2 No. 14 
• NEMA 4X enclosure

Harrier+

• Used for AC and DC pumps
• Control injection rates via timer, cycle count or flow control
• Easy to read display that operates at temperatures as low as -40°F (-40°C)
• CDMA and GSM cellular connectivity
• ETL listed for electrical safety: UL 508 and CSA 22.2 No. 14

 

Harrier Chemical Injection Controller
Power Source DC	9 - 26 VDC
Power Consumption	1 Watt
Cycle/Pressure Control Input (optional)	9 - 26 VDC, Normally open or cycle switch
Auxiliary Input (optional)	Normally open switch
Protection grade	IP54 for indoors
Enclosure Material	Polycarbonate + PET
Membrane Material	Polyester
Maximum Humidity	90% Relative Humidity (non-condensing)
Operating Temperature Range	- 40°C to 55°C
Storage Temperature	- 40°C to 80°C)
Input Contact
Power Source DC	9 - 26 VDC
Outputs
Pump control	Pump Control Voltage = Power Source
Voltage	Pump Control Voltage = Power Source
Maximum Switching Voltage	26 VDC
Maximum Switching Current	16A (DC)
Minimum Switching Current	100 mA (DC)

 

Read less...

To contact Graco Australia about Harrier Chemical Injection System Controllers use Get a quote.