Fire & Smoke Alarm Suppliers in Perth & Brisbane

There are several types of fire and smoke alarms available in Australia, including:

• Ionization Smoke Alarms: These alarms detect small particles of smoke that are produced by fast-burning fires. They are ideal for detecting fires that produce flames and smoke quickly.
• Photoelectric Smoke Alarms: These alarms detect large particles of smoke that are produced by slow-burning fires. They are ideal for detecting fires that smolder and produce smoke without flames.
• Dual Sensor Smoke Alarms: These alarms combine both ionization and photoelectric sensors to detect both fast-burning and slow-burning fires.
• Heat Alarms: These alarms detect the heat produced by a fire and are ideal for use in kitchens or other areas where smoke alarms may be triggered by cooking.
• Carbon Monoxide Alarms: These alarms detect the presence of carbon monoxide in the air, which is a poisonous gas that can be produced by faulty heating systems or other appliances.
• Combination Alarms: These alarms combine smoke and carbon monoxide detection in one unit for added protection.

Overall, it is recommended to have a combination of smoke and carbon monoxide alarms installed in your home for maximum protection against fires and other hazards.

Ionisation smoke alarms and photoelectric smoke alarms are two types of smoke alarms used for detecting smoke and fire. The main difference between the two is the way they detect smoke particles.

• Ionisation smoke alarms use a small amount of radioactive material to ionize the air inside the alarm. When smoke enters the alarm, it disrupts the ionization process, triggering the alarm.
• On the other hand, photoelectric smoke alarms use a light source and a photocell. When smoke particles enter the alarm, they scatter the light, which is detected by the photocell, triggering the alarm.

In terms of effectiveness, photoelectric smoke alarms are generally considered to be more effective in detecting smoldering fires, while ionisation smoke alarms are better at detecting flaming fires.

Installation requirements in Australia vary depending on the state or territory. Smoke alarms must be installed on every level of the home, both inside and outside bedrooms.

• Smoke alarms must be interconnected so that if one alarm sounds, all alarms will sound.
• Smoke alarms must be hardwired with a battery backup or powered by a non-removable battery with a 10-year life span.
• Fire alarms must be installed in commercial buildings and public spaces.
• Installation must be done by a licensed electrician in accordance with Australian Standards.

It is important to check with local authorities for specific requirements in your area.

Fire and smoke alarms should be tested at least once a month to ensure they are in working order. They should also be replaced every 10 years to ensure they are up to date with current safety standards. It is important to also replace the batteries in the alarms every six months to ensure they are working properly.

Installation

It is possible to install a fire and smoke alarm yourself, but it is recommended to hire a professional installer. Professional installers have the knowledge and experience to properly place and install the alarms according to local building codes and regulations. They can also ensure that the alarms work correctly and are interconnected in case of a fire. Additionally, some insurance companies may require professional installation to ensure the alarms are installed correctly and reduce the risk of false alarms or malfunctions.

Combination units that detect both fire and smoke are available on the market. These units are a convenient option for homeowners who want to simplify their safety measures. It is important to do research and choose a unit that is reliable and meets safety standards. Additionally, it is recommended to have multiple alarms throughout a home, including combination units, to ensure maximum safety in case of a fire or smoke emergency.

When choosing a fire and smoke alarm, there are several features to consider:

• Type of sensor: There are two main types of sensors used in fire and smoke alarms: ionization and photoelectric. Ionization sensors are better at detecting fast-burning fires, while photoelectric sensors are better at detecting slow-burning fires. It is recommended to have a combination of both types of sensors for optimal protection.
• Power source: Fire and smoke alarms can be powered by batteries, hardwiring to the home's electrical system, or a combination of both. Battery-powered alarms are portable and easy to install, while hardwired alarms are more reliable but require professional installation.
• Interconnectivity: Interconnected alarms communicate with each other, so if one goes off, all the alarms in the house will sound. This feature is important for larger homes or homes with multiple levels.
• Smart features: Some fire and smoke alarms have smart features such as the ability to send alerts to your smartphone or integrate with a smart home system.
• Carbon monoxide detection: Some fire and smoke alarms also detect carbon monoxide, which is a poisonous gas that can be produced by faulty heating systems or other household appliances.

Maintenance: Look for alarms that are easy to maintain, with features such as easy-to-replace batteries or a low-battery indicator. It is also important to test alarms regularly and replace them every 10 years.

The recommended loudness of a fire and smoke alarm is 85 decibels or higher. This is because a loud alarm is necessary to wake people up and alert them to the danger of a fire. It is also important to ensure that the alarm can be heard in all parts of the home or building, including bedrooms and other areas where people may be sleeping. In addition to the loudness of the alarm, it is also important to have a system that is reliable and well-maintained, with batteries that are checked regularly and replaced as needed.

There are several accessories and features that can enhance the performance of a fire and smoke alarm. Some of these include:

• Wireless Interconnectivity: This feature allows multiple alarms to communicate with each other wirelessly, so that if one alarm detects smoke or fire, all the alarms will sound an alarm. This ensures that everyone in the house or building is alerted to the danger, even if they are in another room.
• Carbon Monoxide Detection: Carbon monoxide is a deadly gas that is produced by the incomplete combustion of fuels. Many modern fire and smoke alarms also have carbon monoxide detectors built in, which can alert you to the presence of this gas in your home.
• Voice Alerts: Some alarms have a feature that allows them to speak in addition to sounding an alarm. This can be especially helpful for people with hearing impairments, as well as for those who are sleeping and may not hear the alarm.
• Battery Backup: Many fire and smoke alarms are powered by batteries, which can wear out over time. A battery backup ensures that the alarm will continue to function even if the batteries die.
• Smart Features: Some alarms can be connected to a smart home system, which allows you to monitor and control them remotely. This can be especially helpful if you are away from home and want to make sure that your home is safe.

Overall, the right accessories and features can make a big difference in the performance of your fire and smoke alarm. By choosing a device with these features, you can ensure that your home is protected from fire and smoke.

Prices in Australia can vary depending on the type and brand of the alarm. On average, a basic smoke alarm can cost anywhere from $15 to $50, while a more advanced smoke and carbon monoxide detector can cost $50 to $150. A wireless interconnected system can cost upwards of $500. It is important to invest in a quality fire and smoke alarm as it can potentially save lives in the event of a fire.