Looking to buy the best Schneider Electric & Cirlock & Schurter Circuit Breaker for sale in Melbourne & Brisbane & Adelaide? Get Quotes sends your requirements to expert suppliers in Australia so you get personalised quotes to compare, then choose the one that’s right for you. No more trawling through multiple websites! Get Quotes to find the right Circuit Breaker for sale now.
Buy with confidence
Save time, compare quotes & buy with confidence
Schneider Electric & Cirlock & Schurter Circuit Breaker Suppliers in Melbourne & Brisbane & Adelaide
Autech Control Group | Automation, Energy Management & Motor Control Autech Control Group Pty Ltd is a product distributor specialising in industrial/commercial automation, energy management and motor control solutions. We offer Australia wide sales and support from our head office based in Melbourne's southeastern suburbs.
We're dedicated to supplying only quality products, at competitive prices, whilst providing exceptional pre and post sales ... Customers: Automation, Electrical, Solar and Instrumentation
ABB Australia | Power & Automation Technologies Leader ABB is a global leader in power and automation technologies that enable customers to improve performance, while lowering environmental impact.The ABB group of companies operates in around 100 countries and employs approximately 104,000 people.
As one of the word's largest automation manufacturers, ABB has built a value chain geared to the singular goal of achieving results ...
Cable-Loc /Voltex Electrical Accessories | Circuit Protection, LED Lighting & Industrial Switchgear Cable-Loc seeks to provide a comprehensive range of circuit protection, LED lighting, and industrial switchgear products directly to Australian electricians.
Cable-Loc understand that your good reputation and integrity are as important as your bottom-line, and Cable-Loc are here to help you increase both.
Cable-Loc are committed to supplying Australian electricians with ...
Safe1 Group | Manufacturers of Electrical Distribution Systems Safe1 Group entered into the Miniature Circuit Breaker Industry in 2001 where they've spent 3 years developing the 1 pole RCBO and started selling into the Australian market in 2005. The recent release of the new JVM16 series of MCB and RCBO’s is the first of its kind with integrated din rail mounted 4 pole RCBO for 3 phase circuits. “I was so frustrated trying to fit an RCD to ...
Fastron Electronics | Power Electronics, Process Control, Measurement Fastron Electronics is a privately owned company based in Melbourne, Australia specialising in supplying Components, Products and Solutions to the Energy Monitoring, Power Electronics, Process Control and Electrical Instrumentation markets.
- Fastron are importers, manufacturers and electrical/electronic design/development and systems engineers.
- Our aim is to select the ...
Misal Technologies | Electrical, Mechanical & Hydraulic Engineering Misal is an independent engineering company that works within the field of electrical, electronic, mechanical and hydraulic engineering.
Misal is involved in a range of activities, offering design, manufacturing, installation, servicing and site construction works as needed.
Misal also provides engineering services to the defence department, R&D programs for new technologies ...
Arvio | Industrial Batteries Arvio takes contemporary living to the NEXT level. We hold a deep understanding of innovative technology, sustainability, beautiful architectural design and automation, all integrated together to deliver elegant, carbon-neutral modern living.
Arvio gives you the power to transform your life.
At it’s core Arvio is passionate about the environment and the role technology ...
Australian Distribution And Protection Technologies | Electrical and Power Equipment ADAPT Australia, trading as Australian Distribution And Protection Technologies was formed in 1992 to service the Electrical Power Industry within Australia, New Zealand and the Pacific Islands with a range of cost effective, innovative, reliable energy products and services.
Today ADAPT Australia’s Products are in service in over 95% of Energy Utilities in the Electrical, Rail, ...
Rockwell Automation | Automation technology Our mission is to improve the quality of life by making the world more productive and sustainable. We are committed to enabling the next generation of smart manufacturing. With the right strategy, talented people, and our substantial financial strength, we are dedicated to deliver value to our customers.
When you invest in Rockwell Automation technology and solutions, you ...
What is a circuit breaker, and what is its purpose?
A circuit breaker is an electrical device designed to protect an electrical circuit from damage caused by excess current flow. Its purpose is to interrupt the flow of electricity in the circuit when the current exceeds a certain level, thereby preventing damage to the circuit and the devices connected to it. Circuit breakers are commonly used in homes, commercial buildings, and industrial facilities to protect electrical equipment and prevent electrical fires. They are an important safety feature in electrical systems and help ensure reliable power supply.
What types of circuit breakers are available in Australia?
There are several types of circuit breakers available in Australia, including:
Miniature Circuit Breakers (MCBs): These are commonly used in residential and commercial buildings and protect against overcurrent and short circuits.
Residual Current Circuit Breakers (RCCBs): These are used to protect against electrical shock by detecting and interrupting any leakage current.
Molded Case Circuit Breakers (MCCBs): These are used in heavy-duty applications such as factories and industrial plants to protect against overcurrent and short circuits.
Air Circuit Breakers (ACBs): These are used in high-voltage applications such as power distribution systems and protect against overcurrent and short circuits.
Ground Fault Circuit Interrupters (GFCIs): These are similar to RCCBs but are commonly used in outdoor and wet locations to protect against electrical shock.
Arc Fault Circuit Interrupters (AFCIs): These are used to detect and interrupt dangerous arcs that can occur in electrical systems and are commonly used in residential buildings.
Overall, the type of circuit breaker used will depend on the specific application and the level of protection required.
How do I determine the correct size and rating for my circuit breaker?
A circuit breaker is a safety device that protects electrical circuits from damage caused by overload, short circuit, or ground fault. To determine the correct size and rating for your circuit breaker, you need to consider the following factors:
Amperage rating: The amperage rating of the circuit breaker should match the amperage rating of the circuit it is protecting. The amperage rating is usually marked on the circuit breaker and the electrical panel.
Voltage rating: The voltage rating of the circuit breaker should match the voltage rating of the electrical system it is connected to. The voltage rating is usually marked on the circuit breaker and the electrical panel.
Type of circuit: The type of circuit will determine the type of circuit breaker you need. For example, a branch circuit requires a single-pole circuit breaker, while a 240-volt circuit requires a double-pole circuit breaker.
Load calculation: The load calculation is the process of determining the total electrical load that will be connected to the circuit breaker. This helps to ensure that the circuit breaker is not overloaded.
Environmental factors: The environment in which the circuit breaker will be installed should also be considered. For example, if the circuit breaker will be installed in a damp or corrosive environment, you may need a circuit breaker with a higher rating.
Overall, it is important to consult with a qualified electrician to determine the correct size and rating for your circuit breaker. They will be able to assess your electrical system and recommend the appropriate circuit breaker for your needs.
Can I replace a circuit breaker myself, or do I need a licensed electrician?
Replacement is a task that can be done by a homeowner, but it is recommended to hire a licensed electrician to ensure safety and compliance with local regulations. If you have experience with electrical work and follow safety precautions, you may be able to replace a circuit breaker yourself, but it is important to shut off power to the circuit and use proper tools and techniques to avoid injury or damage to the electrical system. If you are unsure or uncomfortable with the process, it is best to contact a professional.
What is the average cost of a circuit breaker in Australia?
The cost of a circuit breaker in Australia can vary widely depending on the type and brand. On average, a basic circuit breaker can cost between $20 to $50, while a more advanced circuit breaker may cost upwards of $100. It is always best to consult with a licensed electrician to determine the appropriate type of circuit breaker for your needs and budget.
How do I know if my circuit breaker needs to be replaced?
A circuit breaker is an essential component of any electrical system, and it is responsible for protecting your home or business from electrical overloads and short circuits. Over time, circuit breakers can become worn or damaged, and they may need to be replaced. Here are some signs that your circuit breaker may need to be replaced:
Frequent Tripping: If your circuit breaker trips frequently, it could be a sign that it is wearing out and needs to be replaced. This is especially true if it trips even when you are not using many appliances or devices.
Burnt Smell: If you notice a burnt smell near your circuit breaker, it could be a sign that the breaker is overheating and needs to be replaced. This can be a serious safety hazard, so it is important to address it promptly.
Corrosion or Rust: If you see corrosion or rust on your circuit breaker, it could be a sign that it is no longer functioning properly and needs to be replaced.
Age: Circuit breakers typically last between 15 and 25 years, so if your breaker is older than this, it may be time to replace it even if it is not showing any obvious signs of wear or damage.
If you are unsure whether your circuit breaker needs to be replaced, it is best to consult with a licensed electrician who can assess the condition of your electrical system and make recommendations for repairs or upgrades as needed.
Are there any safety guidelines I need to follow when installing or replacing a circuit breaker?
Installation Safety Guidelines:
Always turn off the main power supply before attempting to install or replace a circuit breaker.
Use insulated tools when handling circuit breakers.
Never touch the bus bars or other live parts with your bare hands.
Ensure that the circuit breaker matches the amperage rating of the circuit.
Do not attempt to install or replace a circuit breaker if you are not experienced with electrical work.
Follow the manufacturer's instructions for installation and wiring.
Use a voltage tester to ensure that the circuit is not live before starting work.
Use a lockout/tagout device to prevent others from accidentally turning on the power while you are working.
Always wear safety glasses and gloves while working with electrical components.
If you are unsure about any aspect of the installation or replacement process, consult a qualified electrician.
Can I buy a used or refurbished circuit breaker, or should I always buy new?
Buying a used or refurbished circuit breaker can be a cost-effective option, but it is important to ensure that the product is in good working condition and meets safety standards. It is recommended to purchase from a reputable seller who has tested and certified the circuit breaker.
What is the warranty for a circuit breaker, and what does it cover?
Warranties vary depending on the manufacturer and product. Generally, most circuit breakers have a warranty of one to five years. The warranty typically covers defects in materials or workmanship that result in the circuit breaker failing to operate properly. This includes issues such as tripping too frequently or failing to trip when necessary. The warranty may also cover damage caused during shipping or installation.
Get 3+ Quotes Now - Compare prices, availability and quality. It’s free, quick and secure.
Back to top
Circuit Breaker Insights
The listed price of a Circuit Breaker for sale ranges from $53 to $495, averaging $274.
If you are looking to a buy a Circuit Breaker for sale, suppliers on IndustrySearch include Autech Control Group