Looking to buy the best Marc Technologies & Testo Industrial Manifold for sale in Sydney & Adelaide? Get Quotes sends your requirements to expert suppliers in Australia so you get personalised quotes to compare, then choose the one that’s right for you. No more trawling through multiple websites! Get Quotes to find the right Industrial Manifold for sale now.
Buy with confidence
Save time, compare quotes & buy with confidence
Marc Technologies & Testo Industrial Manifold Suppliers in Sydney & Adelaide
Profile Solutions | Leak Detectors, Automation Equipment & Plastics Profile Solutions is an Australian Manufacturer building Leak Detectors and Automation equipment for the Global market.
60% of all current production is shipped to over twenty countries in Europe, Asia and the Americas. The company is constantly on the leading edge of Leak detection and has been responsible for many firsts in the industry.
High seed leak testers which in fact ...
H.I.Fraser | Gas, Fluid & Waste Systems With headquarters in Sydney and facilities in Perth, H.I.Fraser is a privately owned Australian company, specialising in gas, liquid and waste system supply, design, build, maintenance and certification.
The company has been operating for over 60 years, with the current ownership beginning in 1989.
Over the last 12 years we have acquired subsidiary companies including ...
CAC Gas & Instrumentation | Calibration Gas & Specialty Gas Mixtures CAC Gas & Instrumentation was established in 2008 to provide Australian and New Zealand customers with exceptional customer support when sourcing calibration gas, specialty gas mixtures and associated gas control systems.
We specialise in specialty gas products for gas detection, process gas analysis, and environmental monitoring and laboratory gas analysis applications.
Spray Shop | Spraying Equipment The Spray Shop customer service and workshop staff have extensive knowledge of spraying equipment, , ideal setups for different industries and application techniques for chemical and fertilizer. We understand the different needs of spray applicators – and have solutions for pest control, aerial spraying, truck mount units and roadside work.
Zenith Controls Pty Ltd | Electrical & Instrumentation Zenith Controls is a dynamic and proactive engineering consultancy and electrical & instrumentation supplier. We are committed to our customers and our products. We have continuously maintained high standards of excellence for our products and services. We offer the most economical schemes to our client which are technically acceptable.
We strive to work towards making a more ...
What is an industrial manifold and what is its purpose?
An industrial manifold is a system of interconnected pipes, valves, and fittings designed to distribute or control the flow of fluids or gases in an industrial setting. It is commonly used in chemical plants, oil refineries, and other manufacturing facilities where large volumes of fluids or gases need to be moved, mixed, or controlled. The purpose of an industrial manifold is to provide a safe, efficient, and reliable means of delivering fluids or gases to various parts of the plant or process. It can also be used to isolate or divert specific flows, regulate pressure, and monitor or measure the flow rate or volume. Overall, an industrial manifold plays a critical role in ensuring the smooth and safe operation of industrial processes.
What materials are industrial manifolds made from?
Industrial manifolds can be made from a variety of materials, depending on the specific application and requirements. Some common materials include stainless steel, carbon steel, brass, and aluminum. These materials are chosen for their durability, corrosion resistance, and ability to withstand high pressure and temperature conditions. Other factors that may influence the choice of material include cost, availability, and compatibility with the fluids or gases being transported through the manifold. Ultimately, the selection of materials for an industrial manifold will depend on the specific needs of the system and the desired performance characteristics.
What are the different types of industrial manifolds available in the market?
An industrial manifold is a device that allows multiple valves to be connected to a single source. There are several types of industrial manifolds available in the market, including:
Block Manifold: A block manifold is a type of industrial manifold that is used to connect multiple valves to a single source. It is typically made of a block of metal and has multiple ports for the valves to be connected.
Modular Manifold: A modular manifold is a type of industrial manifold that is made up of individual components that can be assembled together to create a custom manifold. This type of manifold is often used when space is limited or when a custom configuration is required.
Distribution Manifold: A distribution manifold is a type of industrial manifold that is used to distribute fluid or gas to multiple locations. It is typically used in applications where the fluid or gas needs to be distributed evenly and accurately.
Instrument Manifold: An instrument manifold is a type of industrial manifold that is used to connect multiple instruments to a single source. It is typically used in applications where multiple instruments need to be connected to a single control system.
Valve Manifold: A valve manifold is a type of industrial manifold that is used to control the flow of fluid or gas in a system. It is typically used in applications where precise control of the flow is required.
How do I choose the right industrial manifold for my application?
An industrial manifold is a critical component in many industrial applications, as it is used to regulate and distribute fluids, gases, and other materials through a system of pipes and valves. When choosing the right industrial manifold for your application, there are several factors to consider, including:
Material: The material of the manifold should be compatible with the fluids or gases it will be handling. For example, if the manifold will be used with corrosive chemicals, it should be made of a material that is resistant to corrosion.
Pressure: The manifold should be able to handle the pressure of the system it will be used in. It is important to choose a manifold with a pressure rating that is suitable for the application.
Flow rate: The flow rate of the system should be taken into consideration when choosing a manifold. The manifold should be able to handle the required flow rate without causing any disruption in the system.
Size: The size of the manifold should be appropriate for the system it will be used in. It is important to choose a manifold that fits the pipes and valves in the system.
Configuration: The configuration of the manifold should be chosen based on the specific needs of the application. There are different types of manifold configurations, such as straight-through or block-and-bleed, that are suitable for different applications.
By considering these factors, you can choose the right industrial manifold for your application and ensure that it performs effectively and efficiently.
What are the common sizes of industrial manifolds?
Sizes vary depending on the specific application and the number of valves required. However, some common sizes for industrial manifolds include 1/2 inch, 3/4 inch, 1 inch, 1 1/2 inch, and 2 inch. These sizes refer to the pipe diameter of the manifold and the valves that are attached to it. Manifolds can also be custom-made to fit specific requirements.
Can industrial manifolds be customized to specific requirements?
Yes, industrial manifolds can be customized to specific requirements. Customization of industrial manifolds can include modifications to size, shape, material, and component placement. Customization can also involve the addition of specific features such as pressure gauges, valves, and fittings. Customized industrial manifolds can improve efficiency, reduce costs, and enhance safety in industrial applications.
What are the installation and maintenance requirements for industrial manifolds?
Installation and maintenance requirements for industrial manifolds depend on the specific type and application of the manifold. However, some general guidelines include:
Ensure proper alignment and level of the manifold before installation.
Use appropriate gaskets and sealants to prevent leaks.
Follow manufacturer's instructions for connecting pipes and valves to the manifold.
Use proper tools and equipment for installation.
Regularly inspect the manifold for leaks, cracks or damage.
Replace worn out or damaged parts immediately.
Lubricate moving parts as required.
Clean the manifold regularly to prevent buildup of debris or contaminants.
Overall, proper installation and regular maintenance are key to ensuring the safe and efficient operation of industrial manifolds.
How much do industrial manifolds cost in Australia?
Prices in Australia vary depending on the size, material, and type of manifold required. Generally, industrial manifolds can cost anywhere from a few hundred dollars to several thousand dollars. The cost also depends on the supplier and the level of customization required for the manifold. It is recommended to obtain quotes from multiple suppliers to compare prices and ensure the best value for money.
Are there any warranties or guarantees available for industrial manifolds?
Manufacturers typically offer warranties or guarantees on their products, depending on the specific manufacturer and product. The length and terms of the warranty or guarantee may vary, as well as the coverage provided. It is important to carefully review the warranty or guarantee information provided by the manufacturer before making a purchase, and to contact the manufacturer directly for any questions or concerns. Additionally, some manufacturers may offer additional support and services, such as technical assistance or repair services, to further support the use of their products.
Get 3+ Quotes Now - Compare prices, availability and quality. It’s free, quick and secure.
Back to top
Industrial Manifold Insights
The listed price of a Industrial Manifold for sale ranges from $2,222 to $3,034, averaging $2,628.
If you are looking to a buy a Industrial Manifold for sale, suppliers on IndustrySearch include Profile Solutions