Looking to buy the best Jec & Caterpillar & Kennedy Truck Body - Fuel & Water for sale in Brisbane & Melbourne & Perth & Sydney? Get Quotes sends your requirements to expert suppliers in Australia so you get personalised quotes to compare, then choose the one that’s right for you. No more trawling through multiple websites! Get Quotes to find the right Truck Body - Fuel & Water for sale now.
Buy with confidence
Save time, compare quotes & buy with confidence
Jec & Caterpillar & Kennedy Truck Body - Fuel & Water Suppliers in Brisbane & Melbourne & Perth & Sydney
Adelaide, Brisbane, Darwin, Melbourne, Perth, Sydney
STG Global | Waste, Water, Service, Lube and Vacuum Trucks The story of how STG Global came about started in the small country town of Mansfield. Over 30 years ago, a young bunch of entrepreneurial guys hit by drought and hard times were looking for a way to keep the income coming into the family farm. With the banks pressuring the family to sell, the entrepreneurial gents started tinkering away in the shed, chugging VBs and thinking of ...
J.Smith & Sons | Specialised Trailers J Smith & Sons, a 110 year old Gympie based company in Queensland, manufactures a wide range of specialised trailers for the transport task within Australia and overseas.
Some of these products include low loaders, side-tipping trailers for sugar cane and raw sugar, roll-on/roll-off transfer trailers between road and rail for sugar cane wagons and ‘SMITH’ super-lift trailers ...
ORH Truck Solutions | Industrial Mining Vehicle ORH Truck Solutions Pty Ltd is a leading manufacturer of high-quality and industrial mining vehicles within Australia, designing some of the strongest and most reliable Service Trucks and Water Carts in the industry, at competitive prices, manufacturing in excess of 200 trucks per year. At ORH Truck Solutions we strive to deliver complete customer satisfaction and protection. We ...
What material options are available for truck bodies in Australia?
Materials commonly used in Australia include aluminium, steel, and fiberglass. Aluminium is lightweight, durable, and corrosion-resistant, making it a popular choice for truck bodies. Steel is stronger than aluminium but heavier and more prone to rust, although it can be treated to prevent corrosion. Fiberglass is lightweight and resistant to dents and scratches, but it is not as strong as aluminium or steel. Other less common materials used in truck bodies include wood and plastic. The choice of material depends on the intended use of the truck, the cargo it will carry, and the budget of the buyer.
What are the maximum dimensions allowed for a truck body in Australia?
In Australia, the maximum dimensions allowed for a truck body depend on the type of vehicle and its intended use. For example, a rigid truck with a single trailer can have a maximum length of 19 meters, while a B-double truck can have a maximum length of 26 meters. The maximum width allowed for a truck body is 5 meters, and the maximum height is 3 meters. Additionally, vehicles with oversized loads may require special permits and escorts to ensure safe transportation.
Can a custom truck body be designed and manufactured to meet specific needs?
Yes, a custom truck body can be designed and manufactured to meet specific needs. Custom truck bodies can be designed to fit specific dimensions, weight requirements, and equipment needs. They can also be designed with unique features such as specialized storage compartments, climate-controlled interiors, and specialized lighting. Custom truck bodies are often used in industries such as construction, landscaping, and transportation to meet the unique demands of their operations.
What safety features should be considered when buying a truck body?
Safety features that should be considered when buying a truck body include:
Roll-up doors or swing doors with safety latches to prevent accidental opening while in motion.
Anti-slip surfaces on the floor and steps to prevent slips and falls.
Reflective tape or markings for increased visibility in low-light conditions.
Secure tie-down points and cargo restraints to prevent load shifting during transport.
Backup cameras or sensors for improved visibility when reversing.
LED lighting for improved visibility and energy efficiency.
Lockable compartments and doors to prevent theft or unauthorized access to equipment or cargo.
Adequate ventilation and lighting in enclosed truck bodies to prevent heat buildup and improve visibility.
Crash-tested and certified construction materials and design to ensure the highest levels of safety and durability.
Compliance with relevant safety regulations and standards, such as FMVSS and OSHA.
What is the typical lead time for manufacturing and installing a truck body?
Lead time for manufacturing and installing a truck body can vary depending on various factors such as the complexity of the body design, the availability of materials, and the workload of the manufacturer. Smaller and simpler bodies can be completed quickly, while larger and more complex bodies may take longer to manufacture and install. It is recommended to consult with the manufacturer to get an accurate estimate of the lead time for your specific project.
What is the warranty and after-sales support offered by the manufacturer?
After-sales support may include technical assistance, maintenance, repairs, and replacement parts. It is recommended to review the manufacturer's warranty and after-sales support policies before purchasing a truck body to ensure customer satisfaction and protection.
Are there any weight restrictions for the truck body?
The weight limit can vary depending on the type of truck and the location, and it is important for truck drivers to be aware of and follow these restrictions. It is recommended to consult with local authorities or transportation departments for specific regulations and restrictions in your area.
What type of flooring is recommended for a truck body?
When it comes to flooring for a truck body, the most commonly recommended material is plywood. Plywood is durable, cost-effective, and can withstand heavy loads and constant use. Another popular option is diamond plate aluminum, which is slip-resistant and easy to clean. Some truck owners may also opt for rubber flooring, which offers additional cushioning and sound absorption. Ultimately, the choice of flooring will depend on the specific needs and preferences of the truck owner.
Can the truck body accommodate different types of cargo?
Yes, the truck body can be designed and customized to accommodate different types of cargo. Depending on the type of cargo, the truck body can be modified with various features such as adjustable shelving, tie-downs, refrigeration units, insulation, and more. The design of the truck body should be based on the specific needs of the cargo being transported.
What is the cost range for different types of truck bodies in Australia?
The cost range for different types of truck bodies in Australia varies depending on several factors such as size, material used, and features. Generally, a basic tray body can cost between $5,000 to $10,000, while a refrigerated truck body can range from $20,000 to $60,000. A tipper body can cost around $15,000 to $25,000, while a curtain sider body can cost between $20,000 to $50,000. It is important to note that these are just estimates, and the actual cost may vary depending on the manufacturer and the specific requirements of the customer.
Get 3+ Quotes Now - Compare prices, availability and quality. It’s free, quick and secure.
Back to top
Truck Body Insights
If you are looking to a buy a Truck Body for sale, suppliers on IndustrySearch include STG Global