Looking to buy the best Delta-mobrey & Nivelco & Mobrey Level Switch for sale in Brisbane & Perth? Get Quotes sends your requirements to expert suppliers in Australia so you get personalised quotes to compare, then choose the one that’s right for you. No more trawling through multiple websites! Get Quotes to find the right Level Switch for sale now.
Mechtric | Industrial Automation & Control Products The Mechtric Group is a 100% Australian owned group of companies specialising in the supply of electrical and mechanical engineering products.
Our product range consists of a wide range industrial automation and control equipment including LOVATO low voltage switchgear, soft starters and instrumentation, DELTA Electronics variable speed drives and automation products, SIRENA, ...
Trident Australia | High Pressure & Fluid System Solutions Trident Australia is a West Australian owned company established in 1998.
We specialise in providing complete solutions for high pressure and specification fluid systems and components.
Whether your industry is Oil and Gas, Mining, Chemical, R & D, General Hydraulic or other, we are confident we have just the solution to suit your requirements regardless of where you are ...
Procon Instrument Technology | Pressure & Temperature Measuring Instrumentation Procon Instrument Technology was established in 1988 by Kevin Tryhorn, and it became known for being a supplier of state-of-the-art process control instrumentation and automation systems. Kevin's aim was to offer a single source for instrumentation and process control products at the technical end of the industry and backing these with a high level of Engineering support.
A level switch is a device used to detect the level of liquids, powders or granular materials in a tank or container. It is designed to activate an alarm or control a process when the level of the material reaches a predetermined point.
There are different types of level switches, including float switches, conductive switches, capacitance switches, and optical switches.
A float switch works by using a buoyant object, such as a ball or a cylinder, that is attached to a lever or a cable. When the liquid level rises or falls, the buoyant object moves and triggers the switch to turn on or off.
Conductive switches use a probe that is inserted into the tank or container. When the liquid level reaches the probe, it completes the electrical circuit and activates the switch.
Capacitance switches work by measuring the change in capacitance between two electrodes as the level of the liquid changes.
Optical switches use infrared or visible light to detect the presence or absence of the liquid.
Level switches are commonly used in industries such as oil and gas, water and wastewater treatment, food and beverage, and pharmaceuticals.
What are the different types of Level Switches available in the market?
Es are devices that are used to detect the level of liquid or solids in a container or tank. There are several types of level switches available in the market, including:
Float Level Switches - These are the most common type of level switches that use a float to detect the level of liquids.
Conductivity Level Switches - These switches use electrical conductivity to detect the level of liquids.
Ultrasonic Level Switches - These switches use sound waves to detect the level of liquids.
Capacitive Level Switches - These switches use changes in capacitance to detect the level of liquids.
Optical Level Switches - These switches use light to detect the level of liquids.
Magnetic Level Switches - These switches use magnetic fields to detect the level of liquids.
Vibrating Level Switches - These switches use vibration to detect the level of liquids.
Each type of level switch has its own advantages and disadvantages, and the choice of switch depends on the application and the type of liquid or solid being measured.
What is the suitable material for the Level Switch for my application?
A level switch is a device that is used to detect the level of a liquid or solid material in a container or tank. The material used for the level switch depends on the application requirements, such as the temperature and pressure of the medium being measured, the chemical compatibility of the material, and the operating conditions of the switch.
Some common materials used for level switches include stainless steel, brass, aluminum, and plastic. Stainless steel is often preferred for its corrosion resistance, durability, and high-temperature capabilities. Brass is a good choice for low-temperature applications and is also resistant to corrosion. Aluminum is lightweight and resistant to corrosion, making it suitable for marine applications.
Plastic materials, such as polypropylene and PVC, are often used for their chemical resistance and low cost. They are suitable for applications that involve corrosive or hazardous materials. However, plastic materials may not be suitable for high-temperature or high-pressure applications.
Ultimately, the suitable material for a level switch depends on the specific application requirements and the properties of the medium being measured. It is important to consult with a knowledgeable supplier or manufacturer to determine the best material for your particular application.
What are the factors that should be considered before choosing a Level Switch?
Is an important instrument used in industrial applications to monitor and control the level of liquids or bulk solids. There are several factors that should be considered before choosing a level switch, including the type of medium being measured, the operating conditions, the required accuracy and reliability, and the cost. Other factors to consider include the installation process, the maintenance requirements, and the compatibility with other equipment. It is important to choose a level switch that is suitable for the specific application and meets all necessary safety standards.
What is the accuracy of the Level Switch and what are the measurement units?
The accuracy of a Level Switch can vary depending on the specific device and its application, but generally ranges from ±3mm to ±10mm. The measurement units for a Level Switch can also vary depending on the device and the industry it is used in, but commonly include millimeters (mm), inches (in), or feet (ft). Some Level Switches may also provide readings in percentage (%) or other units of volume such as liters (L) or gallons (gal).
What is the working temperature and pressure range for the Level Switch?
The working temperature and pressure range for the Level Switch can vary depending on the specific model and manufacturer. However, most Level Switches have a temperature range of -40°C to 150°C (-40°F to 302°F) and a pressure range of up to 10,000 psi (689 bar). It is important to refer to the manufacturer's specifications for the specific Level Switch being used to ensure it is suitable for the intended application.
What is the installation process of the Level Switch?
Installation process involves several steps, including selecting the appropriate switch for the application, determining the mounting location, wiring the switch to the control system, and testing the switch to ensure it is working correctly. The following is a general overview of the installation process:
Select the appropriate level switch for the application based on factors such as the type of fluid being measured, the temperature and pressure of the fluid, and the level range required.
Determine the mounting location for the level switch. The switch should be mounted at a height that allows it to detect the desired level range, and in a location that is easily accessible for maintenance.
Install the switch in the chosen location using the appropriate mounting hardware. Ensure that the switch is level and securely attached.
Connect the switch to the control system using the appropriate wiring. Follow the manufacturer's instructions for wiring the switch, and ensure that all connections are secure.
Test the switch to ensure that it is working correctly. Fill the tank or vessel to the desired level and verify that the switch detects the level accurately. Make any necessary adjustments to the switch or control system.
Regularly perform maintenance on the level switch to ensure that it continues to operate correctly. This may include cleaning the switch, checking the wiring connections, and replacing any worn or damaged parts.
What is the maintenance required for the Level Switch and how often should it be done?
Maintenance includes checking for any physical damage, ensuring proper connections and wiring, and cleaning or replacing any clogged or damaged components. The frequency of maintenance depends on the specific type of level switch and its application, but it is typically recommended to be done on a regular basis, such as every 6-12 months. It is also important to follow the manufacturer's guidelines for maintenance and to consult with a professional if any issues or concerns arise.
What is the warranty period for the Level Switch and what is covered under it?
The warranty period for the Level Switch varies depending on the manufacturer and model. However, most Level Switches come with a standard warranty period of one year. During this period, the manufacturer will cover any defects in materials or workmanship that result in the product failing to function properly. This includes repair or replacement of the Level Switch at no cost to the customer. However, the warranty does not cover damage caused by misuse, abuse, or neglect, or any damage that occurs during shipping or installation. It is important to read the manufacturer's warranty policy carefully before purchasing a Level Switch to ensure that you understand the terms and conditions of the warranty.
Get 3+ Quotes Now - Compare prices, availability and quality. It’s free, quick and secure.
Back to top
Level Switch Insights
If you are looking to a buy a Level Switch for sale, suppliers on IndustrySearch include Mechtric