Bronkhorst - CEM Evaporator | W-101A

CEM Evaporator | W-101A

Bronkhorst^® model W-101A CEM 3-way Mixing Valve and Evaporator is suited for precise vapour flow delivery, composed by mixing up to 2 g/h liquid with max. 4 l_n/min of carrier gas at operating pressures between vacuum and 100 bar. The temperature controlled mixing device is used in combination with  a µ-FLOW liquid flow meter and an MFC for carrier gas, together forming a Controlled Evaporation and Mixing (CEM) System.

Key Features:

• Accurately controlled gas/liquid mixture
• Fast response
• High reproducibility
• Very stable vapour flow

Specifications:

Performance
Max. Kv-value	6,6 x 10-2
Max. heating temperature	200°C

 

Mechanical /Electrical specifications
Material (wetted parts)	Stainless steel 316L or comparable
Pressure rating	100 bar(a)
Max. ΔP	5...40 bar (depends on Kv-value; contact your distributor for details)
Process connections	Gas and liquid inlet: compression type or face seal couplings; Vapour outlet: 1/8" tube (other options on request); Purge connection: 1/8" OD or 1/8" face seal
Seals	Metal-to-metal
Plunger	Kalrez®; other on request
Protection class	IP40
Power supply	Mixing valve: +15...24 Vdc +/-10% Heater: 44 Vac
Power consumption	Mixing valve: 4 W (max.); Heater: 150 W (nominal)
Heater capacity	10 W
Connector	Amphenol 6-pin male

 

Read more...

To contact AMS Instrumentation & Calibration about Bronkhorst CEM Evaporator | W-101A use Get a quote.

Bronkhorst^® model W-101A CEM 3-way Mixing Valve and Evaporator is suited for precise vapour flow delivery, composed by mixing up to 2 g/h liquid with max. 4 l_n/min of carrier gas at operating pressures between vacuum and 100 bar. The temperature controlled mixing device is used in combination with  a µ-FLOW liquid flow meter and an MFC for carrier gas, together forming a Controlled Evaporation and Mixing (CEM) System.

Key Features:

• Accurately controlled gas/liquid mixture
• Fast response
• High reproducibility
• Very stable vapour flow

Specifications:

Performance
Max. Kv-value	6,6 x 10-2
Max. heating temperature	200°C

 

Mechanical /Electrical specifications
Material (wetted parts)	Stainless steel 316L or comparable
Pressure rating	100 bar(a)
Max. ΔP	5...40 bar (depends on Kv-value; contact your distributor for details)
Process connections	Gas and liquid inlet: compression type or face seal couplings; Vapour outlet: 1/8" tube (other options on request); Purge connection: 1/8" OD or 1/8" face seal
Seals	Metal-to-metal
Plunger	Kalrez®; other on request
Protection class	IP40
Power supply	Mixing valve: +15...24 Vdc +/-10% Heater: 44 Vac
Power consumption	Mixing valve: 4 W (max.); Heater: 150 W (nominal)
Heater capacity	10 W
Connector	Amphenol 6-pin male

 

Read less...

To contact AMS Instrumentation & Calibration about Bronkhorst CEM Evaporator | W-101A use Get a quote.