BL series Blue Laser Profile Scanner - By ScanCONTROL

2D/3D Blue Laser Scanner scanCONTROL BL series

The special characteristics of this wavelength range enable the sensors to be used in conditions where measurements have not been practicable to date.

The scanCONTROL 26xx/BL and 29xx/BL Blue Laser Profile Scanners from Bestech Australia are ideal for the following applications and materials:

Red-hot glowing metals: The red glow normally "dazzles" red profile scanners, but blue scanners are unaffected.

(Semi-) transparent materials: Due to the short wavelength, the blue laser line penetrates significantly less into the surface than the red laser.

Organic materials: Slight penetration behaviour of blue laser results in higher measurement accuracy.

With a measuring rate of up to 2,560,000 points/sec, the blue laser scanner is the perfect choice for both static and dynamic measurement tasks. The compact designed sensors offer a profile frequency of 200Hz and act as a high-speed profile data providers and allow 3D applications. The scanner power can be supplied via Ethernet or a multi-function port (also for data output, switching between parameters, triggering input or synchronising several profile scanners). There are flexible value outputs such as Ethernet (UDP, Modbus), Serial RS422 (ASCII, MODBUS) with output units as analogue signals or digital switch signals.

The SMART scanCONTROL2610/BL and 2910/BL offer a Plug & Play solution with an integrated controller for simple to complex measurement applications. Blue laser profile scanner is particularly suitable for measurements on transparent surfaces and on red-glowing metals. It provides high precision results even on organic materials such as wood and skin.

Read more...

To contact Bestech Australia about BL series Blue Laser Profile Scanner - By ScanCONTROL use Get a quote.

The special characteristics of this wavelength range enable the sensors to be used in conditions where measurements have not been practicable to date.

The scanCONTROL 26xx/BL and 29xx/BL Blue Laser Profile Scanners from Bestech Australia are ideal for the following applications and materials:

Red-hot glowing metals: The red glow normally "dazzles" red profile scanners, but blue scanners are unaffected.

(Semi-) transparent materials: Due to the short wavelength, the blue laser line penetrates significantly less into the surface than the red laser.

Organic materials: Slight penetration behaviour of blue laser results in higher measurement accuracy.

With a measuring rate of up to 2,560,000 points/sec, the blue laser scanner is the perfect choice for both static and dynamic measurement tasks. The compact designed sensors offer a profile frequency of 200Hz and act as a high-speed profile data providers and allow 3D applications. The scanner power can be supplied via Ethernet or a multi-function port (also for data output, switching between parameters, triggering input or synchronising several profile scanners). There are flexible value outputs such as Ethernet (UDP, Modbus), Serial RS422 (ASCII, MODBUS) with output units as analogue signals or digital switch signals.

The SMART scanCONTROL2610/BL and 2910/BL offer a Plug & Play solution with an integrated controller for simple to complex measurement applications. Blue laser profile scanner is particularly suitable for measurements on transparent surfaces and on red-glowing metals. It provides high precision results even on organic materials such as wood and skin.

Read less...

To contact Bestech Australia about BL series Blue Laser Profile Scanner - By ScanCONTROL use Get a quote.