BendPak - Vehicle Parking Hoist | GP-9F

Vehicle Parking Hoist | GP-9F

Features of this product

• BendPak’s proven legacy gives you an edge in performance, service and cost of ownership.
• Designed to be fastened to the floor or free-standing.
• Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, hardened steel tire stops and hard rubber wheel chocks.
• Boxed-steel columns are made from structural 4.75” x 4.75″ welded steel tubing.
• Columns feature 12” x 12” baseplates 5/8” thick.
• Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
• 3/4″ thick steel safety locks are spring loaded for automatic and solid engagement.
• 13 positive locking positions are spaced every 4 inches.
• Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
• Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
• ¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can’t become dislodged or disengaged.
• Welded-steel tread-plate runways feature utility rail for jack tray and drip trays and other accessories.
• Runways are welded and boxed for extra strength.
• Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
• Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
• Low-profile runways are only 5″ high to accommodate low ride-height vehicles.
• Hardened steel safety lock linkages use 3/8” molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
• Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
• 5/8″ thick top caps.
• Sheave axles feature hardened steel collars and snap rings.
• Pull out tire stops on both ends of the lift that allows drive through capability.
• Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
• Cable keepers assures cables remain safely secure to the sheaves.
• Pre-assembled cables simplifies installation.
• 36″ aluminum approach ramps are gusseted to eliminate flex and bending.
• Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
• Durable powder coat finish.
• 3/4″ runway bolts provide positive attachment with increased safety factor.
• Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
• Electric/hydraulic power system.
• Single hydraulic cylinder underneath runway.
• Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.

Specifications of this product

• Lifting Capacity*: 9,000 lbs. (4,082 kg)
• *Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)
• *Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)
• Rise: A – Min. Runway Height: 5″ (127 mm); B – Max. Rise: 72.5″ (1,842 mm); C – Max. Lifting Height: 77.5″ (1,969 mm)
• Time to Full Rise: 45 seconds
• Outside Dimensions: D – Overall Width: 113″ (2,870 mm); E – Outside Length: 177″ (4,496 mm); F – Overall Length: 210″ (5,334 mm); G – Height of Columns: 93″ (2,362 mm)
• Inside Dimensions: H – Width Between Columns: 98″ (2,489 mm); I – Drive-Thru Clearance:   86″ (2,184 mm);
• Runways: J – Runway Width: 19″ (483 mm); K – Length of Runways: 165″ (4,191 mm); L – Width Between Runways: 37.5″ (953 mm); M – Runway Centerline: 56.5″ (1,435 mm); N – Outside Edge of Runways: 75.5″ (1,918 mm)
• Minimum Wheelbase: Rated Capacity: 115″ (2,921 mm); 75% Capacity: 100″ (2,540 mm); 50% Capacity: 85″ (2,159 mm); 25% Capacity: 70″ (1,778 mm)
• Locking: Locking Positions: 13; Lock Spacing: Every 4″ (102 mm)
• Power Unit: Motor: 110-VAC / 50-60 Hz / 1 Ph / 20-amp; Noise: 45 dB

Read more...

To contact Genesis Equipment about BendPak Vehicle Parking Hoist | GP-9F use Get a quote.

Features of this product

• BendPak’s proven legacy gives you an edge in performance, service and cost of ownership.
• Designed to be fastened to the floor or free-standing.
• Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, hardened steel tire stops and hard rubber wheel chocks.
• Boxed-steel columns are made from structural 4.75” x 4.75″ welded steel tubing.
• Columns feature 12” x 12” baseplates 5/8” thick.
• Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
• 3/4″ thick steel safety locks are spring loaded for automatic and solid engagement.
• 13 positive locking positions are spaced every 4 inches.
• Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
• Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
• ¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can’t become dislodged or disengaged.
• Welded-steel tread-plate runways feature utility rail for jack tray and drip trays and other accessories.
• Runways are welded and boxed for extra strength.
• Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
• Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
• Low-profile runways are only 5″ high to accommodate low ride-height vehicles.
• Hardened steel safety lock linkages use 3/8” molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
• Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
• 5/8″ thick top caps.
• Sheave axles feature hardened steel collars and snap rings.
• Pull out tire stops on both ends of the lift that allows drive through capability.
• Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
• Cable keepers assures cables remain safely secure to the sheaves.
• Pre-assembled cables simplifies installation.
• 36″ aluminum approach ramps are gusseted to eliminate flex and bending.
• Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
• Durable powder coat finish.
• 3/4″ runway bolts provide positive attachment with increased safety factor.
• Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
• Electric/hydraulic power system.
• Single hydraulic cylinder underneath runway.
• Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.

Specifications of this product

• Lifting Capacity*: 9,000 lbs. (4,082 kg)
• *Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)
• *Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)
• Rise: A – Min. Runway Height: 5″ (127 mm); B – Max. Rise: 72.5″ (1,842 mm); C – Max. Lifting Height: 77.5″ (1,969 mm)
• Time to Full Rise: 45 seconds
• Outside Dimensions: D – Overall Width: 113″ (2,870 mm); E – Outside Length: 177″ (4,496 mm); F – Overall Length: 210″ (5,334 mm); G – Height of Columns: 93″ (2,362 mm)
• Inside Dimensions: H – Width Between Columns: 98″ (2,489 mm); I – Drive-Thru Clearance:   86″ (2,184 mm);
• Runways: J – Runway Width: 19″ (483 mm); K – Length of Runways: 165″ (4,191 mm); L – Width Between Runways: 37.5″ (953 mm); M – Runway Centerline: 56.5″ (1,435 mm); N – Outside Edge of Runways: 75.5″ (1,918 mm)
• Minimum Wheelbase: Rated Capacity: 115″ (2,921 mm); 75% Capacity: 100″ (2,540 mm); 50% Capacity: 85″ (2,159 mm); 25% Capacity: 70″ (1,778 mm)
• Locking: Locking Positions: 13; Lock Spacing: Every 4″ (102 mm)
• Power Unit: Motor: 110-VAC / 50-60 Hz / 1 Ph / 20-amp; Noise: 45 dB

Read less...

To contact Genesis Equipment about BendPak Vehicle Parking Hoist | GP-9F use Get a quote.