BendPak - 2 Post Vehicle Hoist | XPR-10XLS-LP

2 Post Vehicle Hoist | XPR-10XLS-LP

Specifications

• Lift arms shown with optional foot guards
• 10,000-lb. lifting capacity
• Expandable top beam accommodates wide or narrow configuration
• Double-telescoping screw pads offer increased versatility
• Padded overhead safety shutoff bar
• Single-piece columns
• Dual hydraulic direct-drive cylinders
• Automatic arm restraints
• Lowered arm tube supports
• Maintenance-free UHMW load bearings
• Oversized 59″ tall carriage for superior strength and durability
• Electric / hydraulic power system
• Large, 17″ x 19″ A36 steel base plate
• Self-lubricating dura-glide UHMW polyethylene bearing system
• Single-point safety release
• Safety locks in each column spaced every 3″
• Automatic overhead shutoff
• Plated arm restraints and arm pins for rust prevention
• Heavy-duty 1/2″ aircraft-quality equalizer cables
• Oversized cable sheave diameter reduces cable fatigue
• 4-piece 63 mm stackable adapter set comes standard
• ALI ?Certified

 

Capacity

Lifting Capacity*	10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle	5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle	5,000 lbs. (2,268 kg)

Rise

A – Rise:	75″ (1,905 mm)
B – Rise + Pad Only:	79.75″ (2,026 mm)
C – Rise + Pad + 63 mm Adapter	82.25″ (2,089 mm)
D – Min. Height + Pad:	4.75″ (121 mm)
Time to Full Rise:	50 seconds

Outside Dimensions

E – Height Overall:	157″ (3,988 mm)
F – Width Overall:	132″ (3,353 mm) or 145″ (3,683 mm)
G – Outside Columns	126.75″ (3,219 mm) or 139.75″ (3,550 mm)

Inside Dimensions

H – Inside Columns:	105.5″ (2,680 mm) or 118.5″ (3,010 mm)
I – Drive-Thru Clearance:	93″ (2,362 mm) or 106″ (2,692 mm)
J – Floor To Overhead Switch:	147″ (3,734 mm)

Arms & Pads

K – Front Arm Reach: (MIN)	147″ (3,734 mm)
K – Front Arm Reach: (MAX)	49.5″ (1,257 mm)
L – Rear Arm Reach: (MIN)	32.25″ (819 mm)
L – Rear Arm Reach: (MAX)	52.5″ (1,334 mm)
Screw Pad Adjustment:	2″ (51 mm)
Max Load Per Arm	2,500 lbs. (1,134 kg)

Power Unit

Motor:	220 VAC / 60 Hz / 1 Ph
Noise:	45 dB

 

Read more...

To contact Genesis Equipment about BendPak 2 Post Vehicle Hoist | XPR-10XLS-LP use Get a quote.

Specifications

• Lift arms shown with optional foot guards
• 10,000-lb. lifting capacity
• Expandable top beam accommodates wide or narrow configuration
• Double-telescoping screw pads offer increased versatility
• Padded overhead safety shutoff bar
• Single-piece columns
• Dual hydraulic direct-drive cylinders
• Automatic arm restraints
• Lowered arm tube supports
• Maintenance-free UHMW load bearings
• Oversized 59″ tall carriage for superior strength and durability
• Electric / hydraulic power system
• Large, 17″ x 19″ A36 steel base plate
• Self-lubricating dura-glide UHMW polyethylene bearing system
• Single-point safety release
• Safety locks in each column spaced every 3″
• Automatic overhead shutoff
• Plated arm restraints and arm pins for rust prevention
• Heavy-duty 1/2″ aircraft-quality equalizer cables
• Oversized cable sheave diameter reduces cable fatigue
• 4-piece 63 mm stackable adapter set comes standard
• ALI ?Certified

 

Capacity

Lifting Capacity*	10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle	5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle	5,000 lbs. (2,268 kg)

Rise

A – Rise:	75″ (1,905 mm)
B – Rise + Pad Only:	79.75″ (2,026 mm)
C – Rise + Pad + 63 mm Adapter	82.25″ (2,089 mm)
D – Min. Height + Pad:	4.75″ (121 mm)
Time to Full Rise:	50 seconds

Outside Dimensions

E – Height Overall:	157″ (3,988 mm)
F – Width Overall:	132″ (3,353 mm) or 145″ (3,683 mm)
G – Outside Columns	126.75″ (3,219 mm) or 139.75″ (3,550 mm)

Inside Dimensions

H – Inside Columns:	105.5″ (2,680 mm) or 118.5″ (3,010 mm)
I – Drive-Thru Clearance:	93″ (2,362 mm) or 106″ (2,692 mm)
J – Floor To Overhead Switch:	147″ (3,734 mm)

Arms & Pads

K – Front Arm Reach: (MIN)	147″ (3,734 mm)
K – Front Arm Reach: (MAX)	49.5″ (1,257 mm)
L – Rear Arm Reach: (MIN)	32.25″ (819 mm)
L – Rear Arm Reach: (MAX)	52.5″ (1,334 mm)
Screw Pad Adjustment:	2″ (51 mm)
Max Load Per Arm	2,500 lbs. (1,134 kg)

Power Unit

Motor:	220 VAC / 60 Hz / 1 Ph
Noise:	45 dB

 

Read less...

To contact Genesis Equipment about BendPak 2 Post Vehicle Hoist | XPR-10XLS-LP use Get a quote.