B&W Diamond Power Gas Temp XT Pyrometer

B&W Diamond Power Gas Temp XT Pyrometer

The Gas Temp XT optical pyrometer uses a patented wavelength to directly measure actual furnace gas temperature – including minute changes in flue gas temperatures. The Gas Temp XT optical pyrometer can be used from boiler start-up to full-load operation.

The GASTEMP XT optical pyrometer measures the average gas temperature within its field-of-view and is independent of gas and fly ash emissivities and cold walls. This feature is designed to provide accurate results, even with blended coals or switching to other fuels. The unique wavelength of the GASTEMP XT optical pyrometer provides the proper measurement depth across the entire width of the boiler.

Features & Benefits

• Rugged to withstand the fireside environment.
• Small, lightweight design for easy installation and convenient portability.
• Built-in readout display.
• Provides both analog and visual output signals.

Specifications

• Accuracy Absolute: ±50çF (±27.8çC) over full range.
• Temperature range: 575çF (302çC) to 2800çF (1538çC).
• Calibration: Factory set, but field adjustable.
• Cooling requirement: 60-100 psig, 35 scfm compressed air at <130çF (54çC).
• Data outputs: Analog. Self- or loop-powered. 4-20 mA, 1500 volt isolation.
• Measurement field-of-view 3ç or 6ç cone.
• Operating requirements:Environment: 0-185çF (85çC). Relative humidity: 0 to 90 percent.
• Resolution: 11çF (5.6çC) over full range.
• Temperature display: Four digits, degrees Fahrenheit or degrees Celcius.
• Weight: 15 lbs (6.8 kg).

Read more...

To contact HMA Group about B&W Diamond Power Gas Temp XT Pyrometer use Get a quote.

The Gas Temp XT optical pyrometer uses a patented wavelength to directly measure actual furnace gas temperature – including minute changes in flue gas temperatures. The Gas Temp XT optical pyrometer can be used from boiler start-up to full-load operation.

The GASTEMP XT optical pyrometer measures the average gas temperature within its field-of-view and is independent of gas and fly ash emissivities and cold walls. This feature is designed to provide accurate results, even with blended coals or switching to other fuels. The unique wavelength of the GASTEMP XT optical pyrometer provides the proper measurement depth across the entire width of the boiler.

Features & Benefits

• Rugged to withstand the fireside environment.
• Small, lightweight design for easy installation and convenient portability.
• Built-in readout display.
• Provides both analog and visual output signals.

Specifications

• Accuracy Absolute: ±50çF (±27.8çC) over full range.
• Temperature range: 575çF (302çC) to 2800çF (1538çC).
• Calibration: Factory set, but field adjustable.
• Cooling requirement: 60-100 psig, 35 scfm compressed air at <130çF (54çC).
• Data outputs: Analog. Self- or loop-powered. 4-20 mA, 1500 volt isolation.
• Measurement field-of-view 3ç or 6ç cone.
• Operating requirements:Environment: 0-185çF (85çC). Relative humidity: 0 to 90 percent.
• Resolution: 11çF (5.6çC) over full range.
• Temperature display: Four digits, degrees Fahrenheit or degrees Celcius.
• Weight: 15 lbs (6.8 kg).

Read less...

To contact HMA Group about B&W Diamond Power Gas Temp XT Pyrometer use Get a quote.

POW-DS-0011-Diamond-Power®-GasTEMP®-XT(0.27MB)