ATS Electro-Lube | Lubrication System | Ultimate Luber

ATS Electro-Lube | Lubrication System | Ultimate Luber

The Ultimate Luber is microprocessor-controlled, energy-efficient motor delivers grease to a fixed-displacement pump that produces pressures over 1000psi. This strength allows the ULTIMATE LUBER^™ to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively.

When a dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the Ultimate Luber^™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output. 

Features

• UL/CUL Div. 2 Hazardous Area approved
• Available in 3 sizes: 4, 8, or 17 oz. (125, 250, or 500cc)
• Single-or Multi-Point configuration
• Refillable using a standard grease gun (no other tools needed)
• Able to service up to 12 lube points with optional progressive distribution block

Benefits

• Available with long-life replaceable battery packs or optional external power sources (AC and DC)
• Optional Remote Control available to connect to customer machinery or control equipment (e.g.  PLC, Contactors, Relays)
• Suitable for indoor-outdoor use
• Optional easy to install mounting brackets and mounting plates for either single-or multi-point applications are available.
• Multiple settings to empty from 15 days to 2 years
• Operating range from -4°F to 131°F (-20°C to +55°C). Note: Low-Temp lubricants must be used at low temperatures
• The Ultimate has an internal blender to minimize grease separation and enhance lube consistency

Sizes & Dimensions

• Model 500: 8-3/4" high X 4-3/4" dia.
• Model 250: 7-1/2" high X 4" dia.
• Model 125: 7-1/2" high X 3-1/8" dia..

 

Read more...

To contact ProActive Maintenance Products about ATS Electro-Lube | Lubrication System | Ultimate Luber use Get A Quote.

The Ultimate Luber is microprocessor-controlled, energy-efficient motor delivers grease to a fixed-displacement pump that produces pressures over 1000psi. This strength allows the ULTIMATE LUBER^™ to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively.

When a dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the Ultimate Luber^™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output. 

Features

• UL/CUL Div. 2 Hazardous Area approved
• Available in 3 sizes: 4, 8, or 17 oz. (125, 250, or 500cc)
• Single-or Multi-Point configuration
• Refillable using a standard grease gun (no other tools needed)
• Able to service up to 12 lube points with optional progressive distribution block

Benefits

• Available with long-life replaceable battery packs or optional external power sources (AC and DC)
• Optional Remote Control available to connect to customer machinery or control equipment (e.g.  PLC, Contactors, Relays)
• Suitable for indoor-outdoor use
• Optional easy to install mounting brackets and mounting plates for either single-or multi-point applications are available.
• Multiple settings to empty from 15 days to 2 years
• Operating range from -4°F to 131°F (-20°C to +55°C). Note: Low-Temp lubricants must be used at low temperatures
• The Ultimate has an internal blender to minimize grease separation and enhance lube consistency

Sizes & Dimensions

• Model 500: 8-3/4" high X 4-3/4" dia.
• Model 250: 7-1/2" high X 4" dia.
• Model 125: 7-1/2" high X 3-1/8" dia..

 

Read less...

To contact ProActive Maintenance Products about ATS Electro-Lube | Lubrication System | Ultimate Luber use Get A Quote.