Posilift can supply a range of Mobile Industrial Manipulators. These are often needed when (i) the reach of the Industrial Manipulator is not sufficient to reach all parts of the work area and (ii) it is not possible or not feasible to use overhead tracking to cover the extra distance.?
The Armtec Mobile manipulator specifically designed for portability. It is not limited by the availability of factory compressed air. The Armtec Mobile generates its own venturi vacuum using a battery-powered air compressor mounted on the ground trolley.
?This allows off-site and outdoor use. It is commonly used by shopfitters for lifting large glass panels, drums, buckets, or large rolls off a truck or for lifting and positioning in packing stations or manufacturing stations.
The CE Certification is on the lifting equipment. The tooling is designed to operate within the requirements of the lifting equipment but is not of itself CE certified because there are too many variations.
ARMTEC PRODUCT INNOVATIONS
1. MOUNTING INDUSTRIAL MANIPULATORS ON WALKIE STACKERS OR PALLET LIFTERS TO EXTEND THE WORK AREA OR MOVE PRODUCT.
2. FITTING THE PNEUMATIC INDUSTRIAL MANIPULATOR TOOLING END EFFECTOR TO BATTERY OPERATED WALKIE STACKERS, FORKLIFTS, and ALL-TERRAIN VEHICLES.
Armtec applies the same precision gripper design, ease of use features, and safety features of the pneumatic industrial manipulator tooling end effector, to battery-operated pallet lifters, walkie stackers, forklifts, and all-terrain vehicles.
Armtec uses the Up/Down movement of the vehicle forks to replace the Up/Down lifting arm and uses the mobility of the vehicle to replace forward / backward and the lateral movement of the manipulator's arm, but retains the ease of use and pneumatic safety features of our manipulator end effector tooling to pneumatic grip or suction the load and to pneumatically or manually incline it or rotate it.
Tooling, to end effector with ease of use design within the CE Certification requirements of the Lifter and into the Walkie Stacker and design our tooling to work action that certification.
Our CE requirement is to follow the CE safety requirements when designing our tooling, not the tooling, However, our tooling conforms to all the requirements.
The ways we mount Industrial Manipulator:
- Ground column fixed.
- Portable Baseplate.
- Forkable Transoaket.
- Fixed Overhead.
- Wall Fixed.
- Single Rail System.
- Bi-directional Rail System.
- Floor Rail System.
- Walkie Stacker Mounted.
- Forklift Mounted.
It is likely that Posilift or one of our suppliers has already solved your handling problem somewhere in the world.
Our fully customisable solutions give us leading competitive advantages with affordable pricing options.
Armtec's Pneumatic Industrial Manipulators are CE Certified and only need 7 bar (or 8 bar for very heavy loads) of clean, dry compressed air to operate.
For the past 30 years, Posilift Australia has specialised in the use of Pneumatic Lifting Devices to solve repetitive material handling problems in the industry.
Call us today for a no-obligation-free measure and quote!
Read less...
To contact Posilift Pty Ltd about Armtec Armtec Mobile Industrial Manipulators - Mobile Roll Lifters use Get a quote.
-280x280-state_7.jpg)
-280x280-state_7.jpg)
-280x280-state_7.jpg)