Activated Carbon Canisters | PureAir 100 Vapour

Activated Carbon Canisters | PureAir 100 Vapour

Activated Carbon Canisters | PureAir 100 Vapour

The most common applications of Activated Carbon Canisters are for the process of gases, tank vent odour control, either within the workplace or vented to atmosphere.

Our activated carbon canisters are constructed of heavy-duty mild steel and Epon lined for corrosion resistance, with epoxy coating on the outside.
Inlet and Outlet connections are 100NB PVC pipe, 50NB BSP pipe or custom made combinations to match your project requirements. Canisters can be fitted with our automatic heat sensing and water quenching systems if required.

Carbon Filtration Solutions can arrange the installation of all canisters, Special application carbons, corrosion resistant FRP fans, and skid mounted canisters with weather protection. Multiple canister absorbers may be installed in a series or parallel if high flow rates or longer contact times are required,

Activated Carbon Canisters have a broad range of industrial applications which include:

• Incinerator flue gas filtration
• Gasoline vapour adsorption
• Dioxin removal, Hydrogen sulfide removal
• Vapours emanating from storage tanks
• Removal of VOCs from treatment plants
• Removal of noxious gases from entering the workplace
• Air purification, removal of noxious odours
• The filtration of gases from vapour streams

Features include:

• Maintenance free operation
• Capacity of up to 275 m3 /H (75 L/Sec)
• High activity carbon
• Epon lined steel drums for corrosion resistance
• Acceptable for transport of spent carbon
• Low pressure drop
• PVC internal piping
• Filters normally available ex-stock
• Shipped with carbon and ready for service
• Side drain for removal of accumulated condensate

Size:

• 205 litre Canister
• 600mm Diameter
• 950mm Height

Specifications:

• Max operating pressure: 14 psi
• Recommended flow rate. CFM: 120 – 140 Max

The pressure drop through a PureAir unit is a fraction of the process air flow, therefore if higher flow or lower pressure drop is required, multiple canisters may be installed in parallel or series.

Pre filtration for activated  carbon filters:
It is extremely important that gas phase filters be adequately protected from particulate contamination. Particulate loading clogs the pore structure of the carbon granules, seriously reducing their ability to capture molecules of gas and odour.
Talk to our service technicians to see if your system requires a pre-filter.

 

Read more...

To contact Carbon Filtration Solutions Pty Ltd about Activated Carbon Canisters | PureAir 100 Vapour use Get A Quote.

The most common applications of Activated Carbon Canisters are for the process of gases, tank vent odour control, either within the workplace or vented to atmosphere.

Our activated carbon canisters are constructed of heavy-duty mild steel and Epon lined for corrosion resistance, with epoxy coating on the outside.
Inlet and Outlet connections are 100NB PVC pipe, 50NB BSP pipe or custom made combinations to match your project requirements. Canisters can be fitted with our automatic heat sensing and water quenching systems if required.

Carbon Filtration Solutions can arrange the installation of all canisters, Special application carbons, corrosion resistant FRP fans, and skid mounted canisters with weather protection. Multiple canister absorbers may be installed in a series or parallel if high flow rates or longer contact times are required,

Activated Carbon Canisters have a broad range of industrial applications which include:

• Incinerator flue gas filtration
• Gasoline vapour adsorption
• Dioxin removal, Hydrogen sulfide removal
• Vapours emanating from storage tanks
• Removal of VOCs from treatment plants
• Removal of noxious gases from entering the workplace
• Air purification, removal of noxious odours
• The filtration of gases from vapour streams

Features include:

• Maintenance free operation
• Capacity of up to 275 m3 /H (75 L/Sec)
• High activity carbon
• Epon lined steel drums for corrosion resistance
• Acceptable for transport of spent carbon
• Low pressure drop
• PVC internal piping
• Filters normally available ex-stock
• Shipped with carbon and ready for service
• Side drain for removal of accumulated condensate

Size:

• 205 litre Canister
• 600mm Diameter
• 950mm Height

Specifications:

• Max operating pressure: 14 psi
• Recommended flow rate. CFM: 120 – 140 Max

The pressure drop through a PureAir unit is a fraction of the process air flow, therefore if higher flow or lower pressure drop is required, multiple canisters may be installed in parallel or series.

Pre filtration for activated  carbon filters:
It is extremely important that gas phase filters be adequately protected from particulate contamination. Particulate loading clogs the pore structure of the carbon granules, seriously reducing their ability to capture molecules of gas and odour.
Talk to our service technicians to see if your system requires a pre-filter.

 

Read less...

To contact Carbon Filtration Solutions Pty Ltd about Activated Carbon Canisters | PureAir 100 Vapour use Get A Quote.