WOMA Ultra High Pressure Plunger Pumps | ...

WOMA - Ultra High Pressure Plunger Pumps | ARP-Series

Supplier: WOMA Australia

Ultra High Pressure Plunger Pumps | ARP-Series

This series was specially developed for pumping water that is contaminated with granular or fibrous solids.

In Stock

The ARP®-high-pressure plunger pumps have operating pressures up to 5800 psi/400 bar and volumes up to 1700 l/min1) and always work reliably with fluids containing abrasives.

Differing from other pumps in this rating class, this series is designed for suction flow temperatures up to 65°C – a temperature resistance that can be flexibly increased to up to 90°C*. You can vary the rating parameters through a simple replacement of the interchangeable plunger set; this is possible due to the modular design of the pump. The pump satisfies both the ATEX as well as the API standard** and has gearbox cooling. An auxiliary drive shaft allows additional flexibility, by allowing the addition of a second pump to the drive train, thus doubling the output. The pumps of the ARP®-series have been developed as slow-speed pumps. For you, this means partic- ularly long life and longer operation between maintenance cycles.

Key Features:

The Basics

Pumping impure media with granular or fibrous solids of varying sizes and geometries
Low flow speeds in the suction and pressure valves

The Technology

All components that are subject to increased wear from solid particles are easily accessible and can be installed or removed very easily
Suction and pressure lines need not be removed when installing/dismantling the valves
Reliable sealing even under abrasive stress due to the elastic characteristics of the inserts on the plug valves
The valve seats, which can be flipped over, are equipped with two precision-manufactured seating surfaces and as a result can be used twice
The working chambers of the cylinders can be emptied individually by use of the valve lifters in the depressurized state

Permissible Limiting Values

Temperature: max. 65°C
Concentration of solids*: 1.5 – 3%
Grain size: 50 – 350 μm

Special Models

Pump head, interchangeable plunger set and valves in special materials for aggressive media being pumped, e.g. sea water
Water temperatures above 65°C

Directives and Standards

ATEX 94/9/EC
API 674 (dependent on pressure flow and volume flow)
Quality management system according to DIN ISO EN 9001

To contact WOMA Australia about WOMA Ultra High Pressure Plunger Pumps | ARP-Series use Get a quote.

The ARP®-high-pressure plunger pumps have operating pressures up to 5800 psi/400 bar and volumes up to 1700 l/min1) and always work reliably with fluids containing abrasives.

Key Features:

The Basics

Pumping impure media with granular or fibrous solids of varying sizes and geometries
Low flow speeds in the suction and pressure valves

The Technology

All components that are subject to increased wear from solid particles are easily accessible and can be installed or removed very easily
Suction and pressure lines need not be removed when installing/dismantling the valves
Reliable sealing even under abrasive stress due to the elastic characteristics of the inserts on the plug valves
The valve seats, which can be flipped over, are equipped with two precision-manufactured seating surfaces and as a result can be used twice
The working chambers of the cylinders can be emptied individually by use of the valve lifters in the depressurized state

Permissible Limiting Values

Temperature: max. 65°C
Concentration of solids*: 1.5 – 3%
Grain size: 50 – 350 μm

Special Models

Pump head, interchangeable plunger set and valves in special materials for aggressive media being pumped, e.g. sea water
Water temperatures above 65°C

Directives and Standards

ATEX 94/9/EC
API 674 (dependent on pressure flow and volume flow)
Quality management system according to DIN ISO EN 9001

Read less...

To contact WOMA Australia about WOMA Ultra High Pressure Plunger Pumps | ARP-Series use Get a quote.

WOMA_Ultra-High Pressure Pumps ARP-Series_Brochure(0.60MB)

Let WOMA Australia provide you with a quote

Supplier

Get a quote

Supplier: WOMA Australia

Location: Henderson, WA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. WOMA Australia are also proudly displaying these credentials:

Location:

Henderson , WA

Joined:

Oct 2020

Level:

Standard Storefront

Verified:

Is this your product? Manage products / company details |

Report this product