FOSS Wine Analyser | WineScan™ SO2

FOSS - Wine Analyser | WineScan™ SO2

Supplier: FOSS

Wine Analyser | WineScan™ SO2

WineScan™ SO2 ensures full control of the winemaking process from grape harvest to bottling. Ready-to-use calibrations allow simultaneous analysis of key wine quality parameters including free and total SO2.

Video for FOSS Wine Analyser | WineScan™ SO2

13 Recent Views In Stock

Value

Full control of the entire winemaking process. Analyse +20 parameters in 30 seconds. Convenient sulphite analysis in just 2 minutes. Low cost per sample. Intuitive operator interface.

Sample Type

Must, must under fermentation, finished wine and sweet finished wine.

Parameters

+20 parameters including: Ethanol, sugars, organic acids, pH, colour, free and total SO2.

Features

Free and total SO2 results in two minutes

Based on aeration-oxidation method reaction

Analytical performance compared to OIV approved method

Fully automated and integrated to WineScan™ measurement

No contact with dangerous chemicals

Lost cost analysis

Reliable results from robust calibrations

Ready to use calibrations for all wines

More than 105.000 reference analysis data included

Documented analytical performance

Configured to suit your needs

Available Options

Auto sampler with up to 120 cups

Mosaic networking software

Colour module measuring at 420 nm, 520 nm and 620 nm

Grape soundness indexes to detect infections

FTIR calibrator software for own calibration modelling

Instrument standardisation

WineScan™ instruments are standardised for high stability to give the same results regardless of any wear on the cuvette.

FossAssure™

FossAssure™ is a WineScan™ digital service designed to reduce product waste, secure brand protection and increase profitability by ensuring the quality and precision of your analytical results. Besides, FossAssure™ services will also improve instrument uptime and reduce production costs by optimising the operation and the performance of your instruments.

Specifications

Performance data

System Description
WineScan™ SO₂ consists of the analyser and Foss Integrator software. Options for WineScan™ SO₂ include the possibility to upgrade with colour (VIS) module and to automatic version with XY Autosampler.

Flex*

Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide)
and
Must: (pH, malic acid, tartaric acid, total acid, brix, density, free sulphur dioxide, total sulphur dioxide)

Auto*
Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide)
More calibrations are available. A large number of parameters can be analysed simultaneously, and the number of measure profiles that can be set-up is unlimited.

Without SO₂ analysis switched on:
Analysis time

30 seconds (excl. SO₂, see below)

Carry-over <1%

Sample Temperature 5 - 35ºC

Sample Volume Programmable 4 - 25 ml, standard volume is 7 ml for Flex and 8 ml for Auto version

Optical System Hermetically sealed, humidity control

Cleaning Automatic and programmable

Calibration routines Slope & intercept adjustment

Options in WinISI™ SW package PLS (Partial Least Squares) and modified PLS calibrations and PCA (Principal Component Analysis). Flexible selection of spectral intervals.

With SO₂ analysis switched on
Analysis time
150 seconds (options for fast hydrolysis time of 86 seconds)

Carry-over < 2%

Sample Temperature 5 - 35ºC

Sample Volume Fixed 4.2 ml to be added (total 8.2 - 29.2 ml)

Hydrolysis agent 4 ml 25% Phosphoric acid

Optical System Independent detector, hermetically sealed, humidity control

Cleaning Automatic and programmable

Calibration routines Slope & intercept adjustment

WinISI™ SW options no SO₂ - 32 liquid parameters available

FTIR Calibrator FTIR Calibrator software for PLS calibration development

* WineScan Auto is configured with an autosampler for the busy laboratory, WineScan Flex has manual sample intake.

Installation requirements

Power supply 100 - 240 VAC ±10% – 50 - 60 Hz

Power consumption Max. 600 VA during measurement, 200 VA in standby

Ambient temperature 5 - 35ºC

Ambient humidity < 80% RH, cyclic up to 80% RH when going from low to high ambient temperature

Weight 89 kg for WSC Flex; 97,4kg incl. XY Autosampler

Dimensions (H×W×D) 54×88×47.3 cm (excl. PC)

Environment For best performance, place the instrument on a stable surface away from excessive and continuous vibration

Degree of protection IP43 (IP43 PC is optional)

Noise Level < 70 dB

Fuse T 10.0 A

Installation category II

Pollution degree 2

Altitude < 2000 m

XY Auto Sampler

Power supply 100 - 240 VAC ±10% – 50 - 60 Hz

Weight 8.4 kg

Dimensions (H×W×D) 61 × 33 × 50.8 cm (with sample probe)

Read more...

To contact FOSS about FOSS Wine Analyser | WineScan™ SO2 use Get a quote.

Value

Full control of the entire winemaking process. Analyse +20 parameters in 30 seconds. Convenient sulphite analysis in just 2 minutes. Low cost per sample. Intuitive operator interface.

Sample Type

Must, must under fermentation, finished wine and sweet finished wine.

Parameters

+20 parameters including: Ethanol, sugars, organic acids, pH, colour, free and total SO2.

Features

Free and total SO2 results in two minutes

Based on aeration-oxidation method reaction

Analytical performance compared to OIV approved method

Fully automated and integrated to WineScan™ measurement

No contact with dangerous chemicals

Lost cost analysis

Reliable results from robust calibrations

Ready to use calibrations for all wines

More than 105.000 reference analysis data included

Documented analytical performance

Configured to suit your needs

Available Options

Auto sampler with up to 120 cups

Mosaic networking software

Colour module measuring at 420 nm, 520 nm and 620 nm

Grape soundness indexes to detect infections

FTIR calibrator software for own calibration modelling

Instrument standardisation

WineScan™ instruments are standardised for high stability to give the same results regardless of any wear on the cuvette.

FossAssure™

FossAssure™ is a WineScan™ digital service designed to reduce product waste, secure brand protection and increase profitability by ensuring the quality and precision of your analytical results. Besides, FossAssure™ services will also improve instrument uptime and reduce production costs by optimising the operation and the performance of your instruments.

Specifications

Performance data

System Description
WineScan™ SO₂ consists of the analyser and Foss Integrator software. Options for WineScan™ SO₂ include the possibility to upgrade with colour (VIS) module and to automatic version with XY Autosampler.

Flex*

Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide)
and
Must: (pH, malic acid, tartaric acid, total acid, brix, density, free sulphur dioxide, total sulphur dioxide)

Auto*
Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide)
More calibrations are available. A large number of parameters can be analysed simultaneously, and the number of measure profiles that can be set-up is unlimited.

Without SO₂ analysis switched on:
Analysis time

30 seconds (excl. SO₂, see below)

Carry-over <1%

Sample Temperature 5 - 35ºC

Sample Volume Programmable 4 - 25 ml, standard volume is 7 ml for Flex and 8 ml for Auto version

Optical System Hermetically sealed, humidity control

Cleaning Automatic and programmable

Calibration routines Slope & intercept adjustment

Options in WinISI™ SW package PLS (Partial Least Squares) and modified PLS calibrations and PCA (Principal Component Analysis). Flexible selection of spectral intervals.

With SO₂ analysis switched on
Analysis time
150 seconds (options for fast hydrolysis time of 86 seconds)

Carry-over < 2%

Sample Temperature 5 - 35ºC

Sample Volume Fixed 4.2 ml to be added (total 8.2 - 29.2 ml)

Hydrolysis agent 4 ml 25% Phosphoric acid

Optical System Independent detector, hermetically sealed, humidity control

Cleaning Automatic and programmable

Calibration routines Slope & intercept adjustment

WinISI™ SW options no SO₂ - 32 liquid parameters available

FTIR Calibrator FTIR Calibrator software for PLS calibration development

* WineScan Auto is configured with an autosampler for the busy laboratory, WineScan Flex has manual sample intake.

Installation requirements

Power supply 100 - 240 VAC ±10% – 50 - 60 Hz

Power consumption Max. 600 VA during measurement, 200 VA in standby

Ambient temperature 5 - 35ºC

Ambient humidity < 80% RH, cyclic up to 80% RH when going from low to high ambient temperature

Weight 89 kg for WSC Flex; 97,4kg incl. XY Autosampler

Dimensions (H×W×D) 54×88×47.3 cm (excl. PC)

Environment For best performance, place the instrument on a stable surface away from excessive and continuous vibration

Degree of protection IP43 (IP43 PC is optional)

Noise Level < 70 dB

Fuse T 10.0 A

Installation category II

Pollution degree 2

Altitude < 2000 m

XY Auto Sampler

Power supply 100 - 240 VAC ±10% – 50 - 60 Hz

Weight 8.4 kg

Dimensions (H×W×D) 61 × 33 × 50.8 cm (with sample probe)

Read less...

To contact FOSS about FOSS Wine Analyser | WineScan™ SO2 use Get a quote.

**Performance data**
System Description WineScan™ SO₂ consists of the analyser and Foss Integrator software. Options for WineScan™ SO₂ include the possibility to upgrade with colour (VIS) module and to automatic version with XY Autosampler.
Flex* Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide) and Must: (pH, malic acid, tartaric acid, total acid, brix, density, free sulphur dioxide, total sulphur dioxide) Auto* Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide) More calibrations are available. A large number of parameters can be analysed simultaneously, and the number of measure profiles that can be set-up is unlimited.
Without SO₂ analysis switched on: Analysis time	30 seconds (excl. SO₂, see below)
Carry-over	<1%
Sample Temperature	5 - 35ºC
Sample Volume	Programmable 4 - 25 ml, standard volume is 7 ml for Flex and 8 ml for Auto version
Optical System	Hermetically sealed, humidity control
Cleaning	Automatic and programmable
Calibration routines	Slope & intercept adjustment
Options in WinISI™ SW package	PLS (Partial Least Squares) and modified PLS calibrations and PCA (Principal Component Analysis). Flexible selection of spectral intervals.
With SO₂ analysis switched on Analysis time	150 seconds (options for fast hydrolysis time of 86 seconds)
Carry-over	< 2%
Sample Temperature	5 - 35ºC
Sample Volume	Fixed 4.2 ml to be added (total 8.2 - 29.2 ml)
Hydrolysis agent	4 ml 25% Phosphoric acid
Optical System	Independent detector, hermetically sealed, humidity control
Cleaning	Automatic and programmable
Calibration routines	Slope & intercept adjustment
WinISI™ SW options	no SO₂ - 32 liquid parameters available
FTIR Calibrator	FTIR Calibrator software for PLS calibration development
* WineScan Auto is configured with an autosampler for the busy laboratory, WineScan Flex has manual sample intake.

Installation requirements
Power supply	100 - 240 VAC ±10% – 50 - 60 Hz
Power consumption	Max. 600 VA during measurement, 200 VA in standby
Ambient temperature	5 - 35ºC
Ambient humidity	< 80% RH, cyclic up to 80% RH when going from low to high ambient temperature
Weight	89 kg for WSC Flex; 97,4kg incl. XY Autosampler
Dimensions (H×W×D)	54×88×47.3 cm (excl. PC)
Environment	For best performance, place the instrument on a stable surface away from excessive and continuous vibration
Degree of protection	IP43 (IP43 PC is optional)
Noise Level	< 70 dB
Fuse	T 10.0 A
Installation category	II
Pollution degree	2
Altitude	< 2000 m
XY Auto Sampler
Power supply	100 - 240 VAC ±10% – 50 - 60 Hz
Weight	8.4 kg
Dimensions (H×W×D)	61 × 33 × 50.8 cm (with sample probe)

**Performance data**
System Description WineScan™ SO₂ consists of the analyser and Foss Integrator software. Options for WineScan™ SO₂ include the possibility to upgrade with colour (VIS) module and to automatic version with XY Autosampler.
Flex* Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide) and Must: (pH, malic acid, tartaric acid, total acid, brix, density, free sulphur dioxide, total sulphur dioxide) Auto* Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide) More calibrations are available. A large number of parameters can be analysed simultaneously, and the number of measure profiles that can be set-up is unlimited.
Without SO₂ analysis switched on: Analysis time	30 seconds (excl. SO₂, see below)
Carry-over	<1%
Sample Temperature	5 - 35ºC
Sample Volume	Programmable 4 - 25 ml, standard volume is 7 ml for Flex and 8 ml for Auto version
Optical System	Hermetically sealed, humidity control
Cleaning	Automatic and programmable
Calibration routines	Slope & intercept adjustment
Options in WinISI™ SW package	PLS (Partial Least Squares) and modified PLS calibrations and PCA (Principal Component Analysis). Flexible selection of spectral intervals.
With SO₂ analysis switched on Analysis time	150 seconds (options for fast hydrolysis time of 86 seconds)
Carry-over	< 2%
Sample Temperature	5 - 35ºC
Sample Volume	Fixed 4.2 ml to be added (total 8.2 - 29.2 ml)
Hydrolysis agent	4 ml 25% Phosphoric acid
Optical System	Independent detector, hermetically sealed, humidity control
Cleaning	Automatic and programmable
Calibration routines	Slope & intercept adjustment
WinISI™ SW options	no SO₂ - 32 liquid parameters available
FTIR Calibrator	FTIR Calibrator software for PLS calibration development
* WineScan Auto is configured with an autosampler for the busy laboratory, WineScan Flex has manual sample intake.

Installation requirements
Power supply	100 - 240 VAC ±10% – 50 - 60 Hz
Power consumption	Max. 600 VA during measurement, 200 VA in standby
Ambient temperature	5 - 35ºC
Ambient humidity	< 80% RH, cyclic up to 80% RH when going from low to high ambient temperature
Weight	89 kg for WSC Flex; 97,4kg incl. XY Autosampler
Dimensions (H×W×D)	54×88×47.3 cm (excl. PC)
Environment	For best performance, place the instrument on a stable surface away from excessive and continuous vibration
Degree of protection	IP43 (IP43 PC is optional)
Noise Level	< 70 dB
Fuse	T 10.0 A
Installation category	II
Pollution degree	2
Altitude	< 2000 m
XY Auto Sampler
Power supply	100 - 240 VAC ±10% – 50 - 60 Hz
Weight	8.4 kg
Dimensions (H×W×D)	61 × 33 × 50.8 cm (with sample probe)