NEW from WIKA is a differential pressure transmitter DPT-10 which has been introduced to fill the gap at the high value end of WIKA's product portfolio for electronic differential pressure measurement.
The DPT-10 differential pressure transmitter has been introduced to fill the gap at the high-value end of WIKA’s product portfolio for electronic differential pressure measurement. It is now possible to offer a WIKA differential pressure transmitter without having to revert to a 3rd-party product. In the development of the DPT-10 the foremost requirements were simplicity of operation, an extensive range of cases for fitting to a very wide array of applications and a good price/performance ratio.
Available Pressure ranges (Differential pressures) for max. static operating pressure 160 bar:
0 … 10 mbar to 0 … 40 bar for max. static operating pressure 420 bar: 0 … 500 mbar to 0 … 40 bar Units mbar/bar, kPa/MPa, psi Output signals 4 … 20 mA, 4 … 20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus Electrical connections M20 x 1.5 cable gland, alternatively ½‘‘ NPT Conduit Pressure connections - ¼-18 NPT (IEC 61518) - RC ¼ - Various threaded adapters and valve blocks - Diaphragm seal connection Accuracy 0.075 % of span Ex approvals to ATEX, IEC, Gost Explosion protection types: - intrinsic safety - flameproof enclosure Full Details available on Data Sheet PE 86.21 (www.wika.com.au)
A wide range of case variants are available, for fitting in the wide variety of installation situations:
Case materials: o Plastic o Aluminium o Stainless steel, deep-drawn, electropolished o Stainless steel, cast Case designs: Single chamber case Double chamber case Case mounted remotely via cable Target markets: - Chemical Industry - Oil & Gas industry - Pharmaceutical industry - Food & Beverage industry - Tank and vessel construction - Plant construction Applications: - Monitoring of pumps and filters - Level measurement in open and pressure-blanketed tanks - Density measurement and separation layer measurement in tanks - Flow measurement using primary flow elements (standard orifice plates, pitot tubes, Venturi tubes).
WIKA Australia | Pressure, Temp, Level, Flow & Force measurement
Over the past 60 years WIKA Alexander Wiegand SE & Co. KG has built a reputation for innovation and quality in the manufacture and service of pressure and temperature measuring instruments. On the basis ...