WAMAIR Polygonal Dust Collectors

WAMAIR® Polygonal Dust Collectors

WAMAIR® Dust Collectors consist of a polygonal shape 304 stainless steel casing, horizontally or vertically inserted filter elements, and a reverse air jet cleaning system integrated in the hinged access door. WAMAIR® Dust Collectors are either built in for venting applications or come as a stand-alone unit with dust collecting hopper. For suction, versions with an integrated fan are available.

Function of WAMAIR® Polygonal Dust Collectors
 
Dust drops down after an automatic reverse air jet cleaning device inside the front inspection door has removed it from the filter elements. The dirty air flow may enter the filter casing from the top inlet flange where heavier particles are subsequently pre-separated while the flow is on the descent. Alternatively, dirty air may enter from the bottom flange which can be either connected to a WAM® PT-type hopper or to the device to be de-dusted (silo, belt conveyor, bucket elevator, chain conveyor etc.).

A special ATEX-version for zone 22 (category 3D equipment) is available.
 
Performance & Technical Features - Benefits of WAMAIR® Polygonal Dust Collectors
 

• High quality compact 304 stainless steel body
• Filter surface: 3 to 70m2 (32 to 755 ft2)
• Air volume from 250 to 6,500m3/h (147 to 3,830 cfm)
• High filtration efficiency thanks to high range of B.I.A.-rated filter media
• Multi-functional electronic control panel installed in standard version with end of cycle cleaning system
• Dust collectors can be easily turned into food-grade version
• Standard equipment developed for temperature range from -20°C to 80°C (-4F to 176°F)
• ATEX 94/9/EC version available for zone 22 (equipment category 3D)
• ATEX reduced pressure PRED = 0.25 barg
• Standard explosion relief panel by REMBE®
• Easy installation, filter delivered in one piece
• Reverse air jet cleaning system integrated inside access door for easy maintenance
• Quick filter element removal from clean air side for easy maintenance
• High cleaning efficiency due to "Full Immersion" solenoid valves incorporated in aluminium corrosion-resistant air tank
• Silenced fan range integrated in access door reduces operating noise level

Options & Accessories for WAMAIR® Polygonal Dust Collectors

• Wide fan range for suction applications
• Spigot for centralised suction
• Dust collection hopper with bucket, butterfly valve, rotary valve, and various types of flow aids
• Electronic differential pressure meter
• Winter protection for solenoid valves

Versions Available for WAMAIR® Polygonal Dust Collectors

• FPH-type: horizontal collectors
• FPV-type: vertical collectors
• FPI-type: horizontal insertable collectors
• FPE-type: vertical insertable collectors

View WAMAIR® Polygonal Dust Collectors Brochure here & here >>

Read more...

To contact WAM Australia about WAMAIR Polygonal Dust Collectors use Get a quote.

WAMAIR® Dust Collectors consist of a polygonal shape 304 stainless steel casing, horizontally or vertically inserted filter elements, and a reverse air jet cleaning system integrated in the hinged access door. WAMAIR® Dust Collectors are either built in for venting applications or come as a stand-alone unit with dust collecting hopper. For suction, versions with an integrated fan are available.

Function of WAMAIR® Polygonal Dust Collectors
 
Dust drops down after an automatic reverse air jet cleaning device inside the front inspection door has removed it from the filter elements. The dirty air flow may enter the filter casing from the top inlet flange where heavier particles are subsequently pre-separated while the flow is on the descent. Alternatively, dirty air may enter from the bottom flange which can be either connected to a WAM® PT-type hopper or to the device to be de-dusted (silo, belt conveyor, bucket elevator, chain conveyor etc.).

A special ATEX-version for zone 22 (category 3D equipment) is available.
 
Performance & Technical Features - Benefits of WAMAIR® Polygonal Dust Collectors
 

• High quality compact 304 stainless steel body
• Filter surface: 3 to 70m2 (32 to 755 ft2)
• Air volume from 250 to 6,500m3/h (147 to 3,830 cfm)
• High filtration efficiency thanks to high range of B.I.A.-rated filter media
• Multi-functional electronic control panel installed in standard version with end of cycle cleaning system
• Dust collectors can be easily turned into food-grade version
• Standard equipment developed for temperature range from -20°C to 80°C (-4F to 176°F)
• ATEX 94/9/EC version available for zone 22 (equipment category 3D)
• ATEX reduced pressure PRED = 0.25 barg
• Standard explosion relief panel by REMBE®
• Easy installation, filter delivered in one piece
• Reverse air jet cleaning system integrated inside access door for easy maintenance
• Quick filter element removal from clean air side for easy maintenance
• High cleaning efficiency due to "Full Immersion" solenoid valves incorporated in aluminium corrosion-resistant air tank
• Silenced fan range integrated in access door reduces operating noise level

Options & Accessories for WAMAIR® Polygonal Dust Collectors

• Wide fan range for suction applications
• Spigot for centralised suction
• Dust collection hopper with bucket, butterfly valve, rotary valve, and various types of flow aids
• Electronic differential pressure meter
• Winter protection for solenoid valves

Versions Available for WAMAIR® Polygonal Dust Collectors

• FPH-type: horizontal collectors
• FPV-type: vertical collectors
• FPI-type: horizontal insertable collectors
• FPE-type: vertical insertable collectors

View WAMAIR® Polygonal Dust Collectors Brochure here & here >>

Read less...

To contact WAM Australia about WAMAIR Polygonal Dust Collectors use Get a quote.