TMS Bridgemaster Arc Spray System

TMS Bridgemaster Arc Spray System

Designed for shop or field applications, the Bridgemaster® metalizing system is a workhorse in any environment.

Meters and Controls are conveniently located on the feeder providing "at the work place" control. Flexibility in design allows for a wide variety of possible configurations.

Features

• Big Wire Capabilities:  Aluminum, Zinc, and Zinc/Aluminum wires, 3/16" in diameter, are routinely sprayed. 
• Combination Leads: Combination leads combine the spray wire, power leads, and atomizing air into a single flexible, lightweight lead.
• Arc Shorting Control: Prevents wire fusing.
• Fan Spray: Provides a wide spray pattern for high production work.  
• Air Sweep: Allows the operator to air sweep the surface prior to spraying.
• Power Supply Choices: Lightweight inverters or conventional DC welding power supplies.
• Flexible: Modular design accommodates easy adaptation to the needs of the applicator.
• Convenience:  All necessary controls and meters are conveniently mounted on the front-face of the wire feed module.  
• The 450-amp inverter power supply weighs just 54Kg!
• A variety of conventional DC welding power supplies are also available.

Safety and Operation

• The Arc Spray Metallizing process produces noise, fumes and Ultraviolet rays.
• Consult the operators' manual and individual wire Material Data Safety Sheets for safety precautions.
• Arc-shields installed on the gun protect against direct UV exposure. These shields are easily removed to accomplish gun maintenance.

System Requirements

• Clean, dry, compressed air capable of 65 CFM @ 100 PSI.
• Electrical requirements are based on the particular power supply selected.
• Three phase power in voltages 380/415 can be accommodated

Options

• Small wire capability.
• Drummed wired dispensers.
• Spray station control consoles for remote operation of single or multiple arc-spray systems.
• Wire straighteners to improve wire feeding.
• Angle spray nozzles for space restricted areas.
• Stretch out kits for placement of the feeder up to 150 feet from the power supply.

 

Read more...

To contact MSSA Interweld about TMS Bridgemaster Arc Spray System use Get A Quote.

Designed for shop or field applications, the Bridgemaster® metalizing system is a workhorse in any environment.

Meters and Controls are conveniently located on the feeder providing "at the work place" control. Flexibility in design allows for a wide variety of possible configurations.

Features

• Big Wire Capabilities:  Aluminum, Zinc, and Zinc/Aluminum wires, 3/16" in diameter, are routinely sprayed. 
• Combination Leads: Combination leads combine the spray wire, power leads, and atomizing air into a single flexible, lightweight lead.
• Arc Shorting Control: Prevents wire fusing.
• Fan Spray: Provides a wide spray pattern for high production work.  
• Air Sweep: Allows the operator to air sweep the surface prior to spraying.
• Power Supply Choices: Lightweight inverters or conventional DC welding power supplies.
• Flexible: Modular design accommodates easy adaptation to the needs of the applicator.
• Convenience:  All necessary controls and meters are conveniently mounted on the front-face of the wire feed module.  
• The 450-amp inverter power supply weighs just 54Kg!
• A variety of conventional DC welding power supplies are also available.

Safety and Operation

• The Arc Spray Metallizing process produces noise, fumes and Ultraviolet rays.
• Consult the operators' manual and individual wire Material Data Safety Sheets for safety precautions.
• Arc-shields installed on the gun protect against direct UV exposure. These shields are easily removed to accomplish gun maintenance.

System Requirements

• Clean, dry, compressed air capable of 65 CFM @ 100 PSI.
• Electrical requirements are based on the particular power supply selected.
• Three phase power in voltages 380/415 can be accommodated

Options

• Small wire capability.
• Drummed wired dispensers.
• Spray station control consoles for remote operation of single or multiple arc-spray systems.
• Wire straighteners to improve wire feeding.
• Angle spray nozzles for space restricted areas.
• Stretch out kits for placement of the feeder up to 150 feet from the power supply.

 

Read less...

To contact MSSA Interweld about TMS Bridgemaster Arc Spray System use Get A Quote.