Speed Humps & Bumps

Traffic Calming Speed Bumps

Rubber Speed Cushion

Blade Runner One Way Access Spikes

Economy Rubber Speed Hump  are an economical alternative to more expensive models.

• Ideally suited to low traffic environments such as unit and town house developments or for short term installations.
• Manufactured from a mixture of natural and recycled rubber.
• When laid in an alternating pattern they conform to AS 2890.1:2004
• Can also be used as a liquid bunding if installed with a sealant. e.g. silastic.
• Can be used with or without end caps.
• Comes complete with all concealed fixings that remain accessible.
• Built in bridge design to accommodate a cable or hose.
• Solid colour won't chip or wear.
• Material: Recycled and Natural rubber.
• Solid colour with moulded surface.

Slo-motion HEAVY DUTY Steel Speed Hump is the modular steel speed control system for seriously heavy vehicle applications (including 'B' - Doubles). Perfectly suited to transport depots, factories, terminals etc.

• Super strong chassis construction with 6mm floor plate and 6 bolt fixing make our Slo-Motion Heavy Duty virtually indestructible.
• Designed to comply with AS 2890.1:2004.
• Five year structural guarantee (conditions apply).
• More than 4 times the load bearing contact area with the road surface than competitive products.
• Use with or without end caps.
• Truly independent modules for easy removal.
• Does not require a rubber underlay to prevent rattle.
• Concealed fixings remain accessible.
• Modules have a built in bridge design to accommodate hoses or cables.
• Top skin: 6mm floor plate

Slo-motion STANDARD DUTY Steel Speed Hump is a modular steel speed control system consisting of truly independent super strong steel modules. The ends of each speed hump are finished off with a pair of end caps. These rounded end caps are moulded from an extremely durable rubber.

• Suitable for car parks, shopping centres or factory complexes.
• Designed to comply with AS 2890.1:2004.
• Five year structural guarantee (conditions apply).
• More than 4 times the load bearing contact area with the road surface than competitive products.
• Can be used with or without end caps.
• Truly independent modules for easy removal.
• Does not require a rubber underlay to prevent rattle.
• Comes complete with accessible consealed fixings.

Traffic Calming Rubber Speed Hump Designed for situations where traffic speed needs to be controlled but a traditional speed hump is not suitable. Smoother approach and departure angles mean a wider range of vehicles can pass over them. 

• Solid rubber construction means these traffic calmers are capable of handling heavy traffic.
• Safety yellow anti-slip insert panels increase visibility & improve pedestrian safety.
• Full load bearing contact area with road surface.
• Convenient modular system can be configured to any length.
• All modules supplied with fixings.
• Concealed fixings remain accessible.
• Highly shock absorbent rubber is both quiet and smooth in operation.
• Rubber construction conforms to uneven surfaces.
  Middle sections fitted with high visibility non-slip panels.
• Solid natural and recycled rubber.
• Moulded black rubber with yellow panels. 

Speed Hump - Slo-Motion 'Compliance'  System is made from Linear Low Density Polyethylene (LLDPE).

• Slo-Motion 'Compliance' is the only moulded speed hump system on the market that is fully manufactured in Australia, and is designed to comply with AS2890.1:2004.
• Modules are moulded from tough virgin grade LLDPE with colour that goes right through.
• LDPE is quiet to drive over, won't crack, rot or rust and is UV stabilised for extended exposure.
• Each end module has recessed fixing points and is moulded in a half round design to complete the speed hump.
• Suitable for heavy use in carparks, shopping centres or factory complexes.

Rubber Speed Cushions

• Rubber Speed Cushions are made from recycled rubber.
• Lighter and easier to work with than asphalt and concrete, significantly minimizing the number of hours that need to be invested to install the solutions.
• Rubber pieces can be pulled up and moved without being destroyed.
• Convenient for municipalities who want to institute temporary measures to test an area or permanently control traffic speed.
• Unlike concrete and asphalt which necessitate frequent and high cost replacement, rubber products are long lasting and cost-efficient.
• In addition to long term benefits, rubber products offer a quick, easy way to install solutions when timing is key.

Blade Runner One Way Access Spikes

The "Blade Runner" one way access spikes BRS1000 and BRS500 consist of either a 1000mm or 500mm heavy duty steel module and steel end caps.

• Each module has independently retracting teeth. When a vehicle approaches from the correct direction the teeth simply retract, allowing the vehicle to pass freely.
• When approached from an unauthorised direction, the teeth lock up denying access and risking almost certain tyre damage.

Key features of the "Blade Runner" one way access spikes include,

• High visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance.
• Designed to provide a soft approach for vehicles due to its low ramp angle and reduced height.
• hese same features also eliminate much of the noise commonly associated with older style products.
• Up to 8 fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.

Blade Runner One Way Access Spikes PDF

 

Read more...

To contact R.J. Cox Engineering about Speed Humps & Bumps use Get a quote.

Economy Rubber Speed Hump  are an economical alternative to more expensive models.

• Ideally suited to low traffic environments such as unit and town house developments or for short term installations.
• Manufactured from a mixture of natural and recycled rubber.
• When laid in an alternating pattern they conform to AS 2890.1:2004
• Can also be used as a liquid bunding if installed with a sealant. e.g. silastic.
• Can be used with or without end caps.
• Comes complete with all concealed fixings that remain accessible.
• Built in bridge design to accommodate a cable or hose.
• Solid colour won't chip or wear.
• Material: Recycled and Natural rubber.
• Solid colour with moulded surface.

Slo-motion HEAVY DUTY Steel Speed Hump is the modular steel speed control system for seriously heavy vehicle applications (including 'B' - Doubles). Perfectly suited to transport depots, factories, terminals etc.

• Super strong chassis construction with 6mm floor plate and 6 bolt fixing make our Slo-Motion Heavy Duty virtually indestructible.
• Designed to comply with AS 2890.1:2004.
• Five year structural guarantee (conditions apply).
• More than 4 times the load bearing contact area with the road surface than competitive products.
• Use with or without end caps.
• Truly independent modules for easy removal.
• Does not require a rubber underlay to prevent rattle.
• Concealed fixings remain accessible.
• Modules have a built in bridge design to accommodate hoses or cables.
• Top skin: 6mm floor plate

Slo-motion STANDARD DUTY Steel Speed Hump is a modular steel speed control system consisting of truly independent super strong steel modules. The ends of each speed hump are finished off with a pair of end caps. These rounded end caps are moulded from an extremely durable rubber.

• Suitable for car parks, shopping centres or factory complexes.
• Designed to comply with AS 2890.1:2004.
• Five year structural guarantee (conditions apply).
• More than 4 times the load bearing contact area with the road surface than competitive products.
• Can be used with or without end caps.
• Truly independent modules for easy removal.
• Does not require a rubber underlay to prevent rattle.
• Comes complete with accessible consealed fixings.

Traffic Calming Rubber Speed Hump Designed for situations where traffic speed needs to be controlled but a traditional speed hump is not suitable. Smoother approach and departure angles mean a wider range of vehicles can pass over them. 

• Solid rubber construction means these traffic calmers are capable of handling heavy traffic.
• Safety yellow anti-slip insert panels increase visibility & improve pedestrian safety.
• Full load bearing contact area with road surface.
• Convenient modular system can be configured to any length.
• All modules supplied with fixings.
• Concealed fixings remain accessible.
• Highly shock absorbent rubber is both quiet and smooth in operation.
• Rubber construction conforms to uneven surfaces.
  Middle sections fitted with high visibility non-slip panels.
• Solid natural and recycled rubber.
• Moulded black rubber with yellow panels. 

Speed Hump - Slo-Motion 'Compliance'  System is made from Linear Low Density Polyethylene (LLDPE).

• Slo-Motion 'Compliance' is the only moulded speed hump system on the market that is fully manufactured in Australia, and is designed to comply with AS2890.1:2004.
• Modules are moulded from tough virgin grade LLDPE with colour that goes right through.
• LDPE is quiet to drive over, won't crack, rot or rust and is UV stabilised for extended exposure.
• Each end module has recessed fixing points and is moulded in a half round design to complete the speed hump.
• Suitable for heavy use in carparks, shopping centres or factory complexes.

Rubber Speed Cushions

• Rubber Speed Cushions are made from recycled rubber.
• Lighter and easier to work with than asphalt and concrete, significantly minimizing the number of hours that need to be invested to install the solutions.
• Rubber pieces can be pulled up and moved without being destroyed.
• Convenient for municipalities who want to institute temporary measures to test an area or permanently control traffic speed.
• Unlike concrete and asphalt which necessitate frequent and high cost replacement, rubber products are long lasting and cost-efficient.
• In addition to long term benefits, rubber products offer a quick, easy way to install solutions when timing is key.

Blade Runner One Way Access Spikes

The "Blade Runner" one way access spikes BRS1000 and BRS500 consist of either a 1000mm or 500mm heavy duty steel module and steel end caps.

• Each module has independently retracting teeth. When a vehicle approaches from the correct direction the teeth simply retract, allowing the vehicle to pass freely.
• When approached from an unauthorised direction, the teeth lock up denying access and risking almost certain tyre damage.

Key features of the "Blade Runner" one way access spikes include,

• High visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance.
• Designed to provide a soft approach for vehicles due to its low ramp angle and reduced height.
• hese same features also eliminate much of the noise commonly associated with older style products.
• Up to 8 fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.

Blade Runner One Way Access Spikes PDF

 

Read less...

To contact R.J. Cox Engineering about Speed Humps & Bumps use Get a quote.