Hakko - Solder Fume Extraction System 240V | FA430-15 Get latest price

Solder Fume Extraction System 240V | FA430-15

In Stock

Product Features:

• Designed for use at soldering stations where it extracts contaminated air directly from the source and transfers it to the unit by flexible or rigid ducts
• Powerful suction, quiet operation
• Three airflow adjustment modes: High, medium, low
• Two filters inside the unit remove contaminants from the air, then return the purified air to the area where the FA-430-16 is located
• Pre-filter made from treated polyester material that removes coarse particles like dust and subsequently extends the life of the main HEPA filter
• HEPA filter made from fiberglass paper medium and provides the greatest amount of surface area within the volume of the filter case
• Standard filters contain an activated carbon element with absorption ratings of 80-85% and are also designed to extend the life of the main HEPA filter
• Filter efficiencies are greater than 98% at 0.3 microns
• Special filter replacement notification function detects the fan speed and notifies the operator of the appropriate time to replace the filters via indicator lights on the front panel
• Power consumption: 120W
• Maximum air flow:
  - One port: 145 CFM (4.1 cu.m./min.)
  - Two ports: 167 CFM (4.7 cu.m./min.)
• Noise level: 44-53 dB @1m
• Dimensions: 13.0" W x 14.4" H x 13.5" D (330 x 366 x 343 mm)
• Weight (with filters): Approximately 16.5 lbs. (7.5 kgs)
• NOTE: Not for use with flammable vapors
• UNIT Requires C1571 / C1572 Duct Kit as additional options

Read more...

To contact Oritech about Hakko Solder Fume Extraction System 240V | FA430-15 use Get a quote.

Product Features:

• Designed for use at soldering stations where it extracts contaminated air directly from the source and transfers it to the unit by flexible or rigid ducts
• Powerful suction, quiet operation
• Three airflow adjustment modes: High, medium, low
• Two filters inside the unit remove contaminants from the air, then return the purified air to the area where the FA-430-16 is located
• Pre-filter made from treated polyester material that removes coarse particles like dust and subsequently extends the life of the main HEPA filter
• HEPA filter made from fiberglass paper medium and provides the greatest amount of surface area within the volume of the filter case
• Standard filters contain an activated carbon element with absorption ratings of 80-85% and are also designed to extend the life of the main HEPA filter
• Filter efficiencies are greater than 98% at 0.3 microns
• Special filter replacement notification function detects the fan speed and notifies the operator of the appropriate time to replace the filters via indicator lights on the front panel
• Power consumption: 120W
• Maximum air flow:
  - One port: 145 CFM (4.1 cu.m./min.)
  - Two ports: 167 CFM (4.7 cu.m./min.)
• Noise level: 44-53 dB @1m
• Dimensions: 13.0" W x 14.4" H x 13.5" D (330 x 366 x 343 mm)
• Weight (with filters): Approximately 16.5 lbs. (7.5 kgs)
• NOTE: Not for use with flammable vapors
• UNIT Requires C1571 / C1572 Duct Kit as additional options

Read less...

To contact Oritech about Hakko Solder Fume Extraction System 240V | FA430-15 use Get a quote.